NEEWER TP-M200

Contents

NEEWER 200cm Video Tripod Instruction Manual

Model: TP-M200

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your NEEWER 200cm Heavy Duty Aluminum Alloy Video Tripod (Model TP-M200). Designed for professional video cameras, DSLR cameras, and camcorders, this tripod offers stability and versatility for various shooting environments, including portrait shooting, interviewing, film production, and outdoor photography.

Please read this manual thoroughly before using the product to ensure proper and safe operation.

2. Package Contents

Verify that all items listed below are included in your package:

  • 1 x Heavy Duty Video Camera Tripod
  • 1 x Carrying Bag

3. Specifications

FeatureSpecification
ModelTP-M200
MaterialAluminum Alloy
Storage Length35.8” / 91cm
Minimum Height34.6” / 88cm
Maximum Height78.7” / 200cm
Tripod Leg Diameter0.55" - 0.79" / 14mm - 20mm
Leg Sections3
Net Weight9.87lb / 4.48kg
Maximum Load Capacity17.6lb / 8kg
Head TypeFluid Drag Head
Bowl Base Diameter70mm
Quick Release Plate Screws1/4" and 3/8"
NEEWER 200cm Video Tripod Infographic with Features and Specifications
Figure 1: Overview of NEEWER 200cm Video Tripod features and specifications.

4. Key Features

  • Sturdy Aluminum Alloy Construction: Durable double tube legs (14-20mm diameter) for stability in various shooting environments.
  • 70mm Bowl Base: Supports higher load capacity and enhances stability, adjustable for uneven surfaces.
  • Adjustable Height: Extends from 34.6" (88cm) to 78.7" (200cm) with strong flip locks for quick and secure adjustments. Folds down to 35.8" (91cm) for portability.
  • Fluid Drag Head: Provides smooth 360° horizontal panning and -70° to +90° vertical tilting for precise camera movements.
  • Quick Release Plate: Large plate with standard 1/4" and 3/8" screws for broad compatibility with DSLR cameras and camcorders. Features a non-slip pad and a release button.
  • Mid-Level Spreader: Durable and easy to set, providing additional stability and control over leg angle and footprint.
  • Bubble Level: Integrated bubble level ensures the tripod is perfectly balanced and securely set up.
  • Non-Slip Rubber Feet: Equipped with rubber pads at the bottom of the feet to increase grip and stability on various surfaces.

5. Setup and Assembly

5.1 Unpacking and Initial Inspection

  1. Carefully remove all components from the carrying bag.
  2. Inspect the tripod for any signs of damage during transit. If any damage is found, do not proceed with assembly and contact customer support.
  3. Ensure all package contents listed in Section 2 are present.

5.2 Setting Up the Tripod Legs

  1. Place the tripod on a flat, stable surface.
  2. Release the leg locks (flip locks) on each leg section.
  3. Extend the legs to the desired height. Refer to Figure 2 for height adjustments.
  4. Securely close all leg locks to prevent accidental collapse.
  5. Adjust the mid-level spreader to achieve the desired leg angle and footprint for maximum stability.
  6. Use the built-in bubble level on the fluid head to ensure the tripod is perfectly level. Adjust the 70mm bowl base if necessary to fine-tune leveling on uneven terrain.
Adjustable Height of NEEWER Tripod with Flip Locks
Figure 2: Tripod height adjustment using flip locks, showing various heights from 34.6" to 78.7".
NEEWER Tripod 70mm Bowl Base, Mid Level Spreader, and Double Tube Legs
Figure 3: Details of the 70mm bowl base, mid-level spreader, and double tube metal legs for enhanced stability.

5.3 Attaching Your Camera/Camcorder

  1. Locate the Quick Release (QR) Plate on the fluid head.
  2. Press the QR Plate Release Button and slide the QR plate out of the fluid head.
  3. Attach your camera or camcorder to the QR plate using the appropriate 1/4" or 3/8" screw. Ensure the camera is securely fastened to the plate.
  4. Slide the QR plate with the attached camera back into the fluid head until it clicks into place. Ensure the QR Plate Locking Knob is tightened to prevent accidental release.
Fluid Drag Head with Quick Release Plate and Controls
Figure 4: Close-up of the fluid drag head, showing the quick release plate, locking knob, release button, and other controls.

6. Operating the Tripod

6.1 Adjusting the Fluid Head

  • Panning (Horizontal Movement): Loosen the Pan Locking Knob (refer to Figure 4) to allow the head to rotate 360° horizontally. Tighten the knob to lock the head in position.
  • Tilting (Vertical Movement): Loosen the Tilt Locking Knob (refer to Figure 4) to adjust the camera's vertical angle from -70° to +90°. Tighten the knob to secure the tilt angle.
360 Degree Panoramic Photography and Adjustable Shooting Angle
Figure 5: Demonstrates the 360° panoramic capability and the -70° to +90° adjustable shooting angle of the fluid head.

6.2 Using the 3/8" Threaded Expansion Hole

The fluid head includes a 3/8" threaded expansion hole (refer to Figure 4) which can be used to attach external accessories such as monitor arms, microphones, or LED lights, expanding your shooting capabilities.

6.3 Applicable Scenes

This tripod is versatile and suitable for a wide range of applications:

Applicable Scenes for NEEWER Video Tripod: Portrait, Interview, Film, Outdoor
Figure 6: Examples of applicable scenes including portrait shooting, interviewing, film production, and outdoor photography.
  • Portrait Shooting: Achieve stable shots for professional portraits.
  • Interviewing: Maintain steady camera angles during interviews.
  • Film Production: Essential for smooth cinematic movements and static shots.
  • Outdoor Photography: Provides stability on various terrains for landscape and nature photography.

7. Maintenance

  • Cleaning: Wipe down the tripod with a soft, dry cloth after each use to remove dust and dirt. For stubborn grime, use a slightly damp cloth and mild soap, then dry thoroughly.
  • Lubrication: Periodically check moving parts, especially the fluid head and leg locks, for smooth operation. Apply a small amount of silicone-based lubricant if necessary, avoiding excessive application.
  • Storage: When not in use, fold the tripod to its storage length (35.8" / 91cm) and store it in the provided carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
  • Inspection: Regularly inspect all screws, knobs, and leg locks to ensure they are tight and functioning correctly. Do not overtighten.

8. Troubleshooting

ProblemPossible CauseSolution
Tripod is unstable.Leg locks not fully engaged; uneven surface; mid-level spreader not properly set.Ensure all leg locks are securely fastened. Adjust the 70mm bowl base and mid-level spreader to level the tripod using the bubble level. Ensure non-slip rubber feet are making full contact with the surface.
Fluid head movement is stiff or jerky.Pan/Tilt locking knobs are too tight; lack of lubrication; dirt/debris in mechanism.Loosen the Pan/Tilt locking knobs. Clean the fluid head mechanism. Apply a small amount of silicone lubricant if necessary.
Quick Release Plate not securing camera.Camera screw loose; QR plate not fully inserted; QR Plate Locking Knob not tightened.Ensure the camera is tightly screwed onto the QR plate. Re-insert the QR plate until it clicks, then tighten the QR Plate Locking Knob.
Leg sections slide down after adjustment.Flip locks are not fully closed or are worn.Ensure flip locks are firmly closed. If the issue persists, inspect the flip lock mechanism for wear and tear.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official NEEWER website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.