1. Introduction
Thank you for choosing the SUNSTER TB10Pro Diesel Air Heater. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new heater. Please read it thoroughly before use and keep it for future reference.
The SUNSTER TB10Pro is a versatile and portable diesel air heater designed for various applications, including motorhomes, tents, outdoor camping, and other environments requiring reliable heating. It features intelligent controls, safety mechanisms, and efficient fuel consumption.
For additional details and visual guides, please refer to the official user manual PDF available at: User Manual (PDF)
2. Product Features
- Adaptive Plateau Mode: Operates effectively at high altitudes up to 5500 meters (approximately 18,000 feet), automatically adjusting fuel output and displaying altitude.
- Automatic Start & Stop (Constant Temperature): Intelligent thermostat maintains a set temperature, automatically starting and stopping the heater as needed.
- Ventilation Function: Allows air circulation without engaging the heating element.
- Turbo Heat Mode: Provides rapid heating for quick warmth.
- 24-Hour Timer Function: Schedule power on/off times for convenience.
- Low Consumption & Quiet Operation: Efficient fuel use (approx. 1 gallon per night) and low noise level (≤35 dB) for undisturbed sleep.
- Innovative CO Alarm System: Built-in CO alarm continuously monitors carbon monoxide levels, providing alerts and automatic shut-off in critical situations.
- Smart APP Control: Control the heater via the "Sunster" Bluetooth application on your smartphone.
- One-Click Access LCD Switch: Easy access to ventilation, gear, and temperature modes without complex key combinations.
- Indoor Climate Control: Includes a 4-meter extension cable for convenient indoor placement of the control panel.
- Versatile Power Options: Compatible with 110V-240V AC adapter and DC12V/24V battery power.
- Fast Heating: Heats up 215-269 sq.ft (20-25 m²) within 10 minutes.
- Comprehensive Safety Features: Includes overheat, short-circuit, reverse connection, and over-voltage protection.
3. Package Contents
Ensure all items are present and undamaged upon unpacking:

- 1 x Air Diesel Heater Unit
- 1 x Remote Control
- 1 x AC 110-240V Power Adapter
- 1 x Silencer
- 1 x Exhaust Pipe
- 1 x Flexible and Stretchable Air Outlet Pipe
- 1 x Set Screw Accessory Kit
- 1 x User Manual (Printed)
- 1 x DC Battery Power Cable
- 1 x Heat Protection Sleeve
- 1 x 4m Switch Extension Cable
4. Setup and Installation
4.1 Product Structure Overview

Key components:
- Hot Air Outlet
- Exhaust Pipe
- Metal Buckle
- Air Filter
- Power Input Interface
- Air Inlet
- Machine Upper Cover
- Switch Remote Control Placement Box

4.2 Power Connection
The heater supports two main wiring methods for wide applicability:

- DC 12V/24V: Connect directly to a vehicle battery for mobile or off-grid use.
- AC 110-240V: Use the provided AC-DC power adapter to connect to standard wall outlets in tool rooms, garages, or homes.
4.3 Exhaust and Air Outlet Installation
For safer heating, follow these rapid assembly guidelines:

- No installation of intake pipe is required; the air filter is fixed at the bottom of the unit.
- Install exhaust pipes on the side of the heater to prevent blockage.
- Utilize the exhaust pipe protective cover for enhanced safety.
The control panel can be mounted indoors using the 4-meter extension cable for convenient access and operation.

5. Operating Instructions
The TB10Pro offers multiple ways to control its operation:

Video 5.1: Product Overview and Control Demonstrations
5.1 A2422 Wireless Remote Controller (with CO Monitoring)
This device integrates carbon monoxide (CO) detection and intelligent remote heater control.

5.1.1 Basic Operation
- Power On: In the OFF state, long press the power button (8-10 seconds) until the device powers on. The Bluetooth icon will flash, indicating it's searching for a matched heater switch.
- Power Off: In the running state, press the power button to turn off the heater. The screen will display "OFF". The remote will automatically turn off after a period (e.g., 60 seconds).
- Heater On/Off: After matching, press the power button to turn the heater on or off.
- Check CO Concentration/Temperature: Long press the decrease button to view current CO concentration and ambient temperature. Press again for current time.
- Backlight On/Off: Long press the increase button to toggle backlight.
5.1.2 Matching with Heater Switch
- In the OFF state, long press the add button until the Bluetooth icon flashes.
- Turn on the matching mode of the heater switch.
- If successful, the Bluetooth icon on the remote will remain constant, and it will display the heater's current status. If unsuccessful, the device will turn off.
5.1.3 Mode Switching and Parameter Adjustment
After successful startup, press the SET button to cycle through modes:
- LEL (Gear Mode): Adjust fan speed/power level using increase/decrease buttons.
- tEP (Temperature Control Mode): Set desired temperature using increase/decrease buttons.
- AUt (Constant Temperature Automatic Start/Stop Mode): Heater automatically maintains set temperature.
- SUP (Strong Heat Mode): (Applicable to some motherboards) Provides maximum heat output.
- FAN (Ventilation Mode): (Applicable to some motherboards) Circulates air without heating.
In running state, use the increase/decrease buttons to adjust parameters (gear in gear/ventilation mode, set temperature in temperature control/constant temperature mode).
5.1.4 Feature Settings (via SET button long press)
Long press the SET button for 3 seconds to enter setting mode. Use increase/decrease to navigate, SET to select, and power button to exit.
- F00 Current Time Setting: Adjust time. (Note: When connected to heater switch, it syncs with heater's time).
- F01 Temperature Compensation Setting: Adjust temperature error (range -9℃ to +9℃).
- F02 Temperature Unit Switching: Switch between Celsius and Fahrenheit. (Note: Syncs with heater's unit when connected).
- F03 Carbon Monoxide (CO) Alarm Value Setting: Set CO alarm threshold (default 50 PPM, range 0-500).
- F04 Carbon Monoxide (CO) Shutdown Value Setting: Set CO level for automatic heater shutdown (default 100 PPM, range 0-500).
- F05 Backlight Settings: Adjust backlight auto-off time (0-60 seconds). 0 seconds means backlight is always off.
- F06 Ambient Temperature Value Setting: Choose between remote's (CtrL) or heater switch's (SLtH) ambient temperature for display.
- F07 Carbon Monoxide (CO) Calibration: Calibrate CO sensor in an open environment. Long press SET when AdJ flashes.
- F08 Firmware Version Number: Displays current firmware version.
Safety Warning: To fully protect your safety, the smart remote control is linked to the heating equipment. When abnormal CO concentration is detected, the alarm will automatically trigger. Please open windows for ventilation, evacuate the environment, and check the equipment. Even with automatic control, do not solely rely on technical protection. Actively monitor your environment.
5.2 Bluetooth APP Control
Download the "Sunster" application to control your heater via Bluetooth (approx. 32ft range).

The app allows you to:
- Adjust modes (heating, fan, etc.)
- Set timing functions
- Control automatic start/stop based on temperature
- Monitor current temperature, voltage, body temperature, and altitude.
5.3 Standard Remote Control
A basic remote control is included for convenient power on/off and temperature adjustments from a distance (approx. 260ft range).
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your SUNSTER TB10Pro Diesel Air Heater.
- Air Filter: The heater features an upgraded integrated air filter. Regularly check and clean or replace the air filter to ensure proper airflow and heating efficiency.
- Exhaust System: Inspect the exhaust pipe and heat protection sleeve for any damage or blockages. Ensure the exhaust is clear and directed away from flammable materials.
- Fuel Tank: Keep the 6L fuel tank clean and free of contaminants. Use only clean diesel fuel. The tank cap is leak-proof.
- General Cleaning: Keep the exterior of the heater clean. Do not use abrasive cleaners or solvents.
- CO Sensor Calibration: It is recommended to calibrate the CO sensor in an open environment when using the product for the first time or after long-term storage (refer to Section 5.1.4, F07).
7. Troubleshooting
This section addresses common issues you might encounter with your diesel air heater.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power, remote not matched, fuel tank empty. | Check power connection (AC/DC), ensure remote is matched (Section 5.1.2), refill fuel tank. |
| CO alarm sounds. | High carbon monoxide concentration. | Immediately open windows for ventilation, evacuate the area, and investigate the source of CO. Do not re-enter until safe. |
| Heater shuts off unexpectedly. | Overheat protection, high CO level, low fuel, power interruption. | Check for obstructions, ensure proper ventilation, check CO levels, refill fuel, verify power supply. |
| Remote control/App not connecting. | Not matched, out of range, Bluetooth off. | Ensure remote is matched (Section 5.1.2), move closer to the heater, ensure Bluetooth is enabled on your device. |
| Inaccurate temperature reading. | Sensor error, remote/heater temperature discrepancy. | Adjust temperature compensation (Section 5.1.4, F01) or select correct ambient temperature source (Section 5.1.4, F06). |
If problems persist, consult the full user manual PDF or contact customer support.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Sunster |
| Model | TB10Pro |
| Item Type | Heating & Fans |
| Material | Aluminum + Plastic |
| Fuel | Diesel |
| Fuel Type | Diesel Only |
| Heater Power | 8KW |
| Rated Voltage | DC 12V & 24V; AC 110-240V |
| Adapter Input | AC110-240V 50-60Hz |
| Tank Capacity | 6L |
| Fuel Consumption | 0.16-0.45 (L/H) |
| Adjustable Temp. Range | 46℉-95℉ / 8℃-35℃ |
| Heater Working Temperature | -40℃~+20℃ / -40℉~+68℉ |
| Oil Pump Working Temperature | -40℃~+20℃ / -40℉~+68℉ |
| Starting Current | 10A |
| Control Method | LCD + Remote Control + Bluetooth |
| Language Selection (Voice) | German, English, Russian |
| Pump Oil Volume Setting | Automatic Pump Oil |
| Temperature Control Conversion | Gear/temperature |
| Special Feature 1 | Wireless temperature sensing Switch |
| Special Feature 2 | CO monitoring System |
| Feature 1 | Automatic Start & Stop (constant temperature) |
| Feature 2 | Temperature compensation |
| Feature 3 | Ventilation Mode |
| Feature 4 | Turbo Heat Mode |
| Feature 5 | Blowing Mode |
| Feature 6 | Display Altitude (Display altitude, plateau mode) |
| Feature 7 | 24H Timing Function |
| Feature 8 | Ultra Quiet Mode (< 35db) |
| Item Weight | 10kg |
| Item Height | 10.28cm |
| Item Width | 10.09cm |
| Item Length | 15.77cm |
| Certification | RoHS, FCC, CE |
| Origin | Mainland China |
9. User Tips
- For optimal fuel efficiency, utilize the automatic start/stop feature to maintain a consistent temperature.
- When operating in high-altitude areas, the heater automatically adjusts its combustion. Ensure the altitude display is accurate.
- To minimize noise, ensure the silent oil pump and muffler are correctly installed and free from obstructions.
- Always ensure adequate ventilation, especially when using the heater in enclosed spaces, to prevent carbon monoxide buildup.
- Regularly check the fuel level using the integrated indicator to avoid unexpected shutdowns.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the Sunster Official Store directly through your purchase platform. Keep your purchase receipt as proof of purchase.