UGREEN US3000

Contents

UGREEN US3000 120W UPS for NAS User Manual

Model: US3000

1. Product Overview

The UGREEN US3000 is a 12000mAh, 120W Uninterruptible Power Supply (UPS) designed to provide continuous power and protection for your Network Attached Storage (NAS) devices and hard disks. It features automatic identification, seamless power switching, and multiple safety protections to safeguard your valuable data against sudden power outages.

UGREEN US3000 UPS device with power cable
Figure 1: UGREEN US3000 UPS
UGREEN US3000 UPS highlighting 12000mAh capacity, APP control, extended power, 0s seamless power, and 9 safety shields
Figure 2: Key Features of UGREEN US3000 UPS

2. Safety Features

The US3000 UPS is equipped with a 9-fold safety shield to ensure stable power output and protect your devices even in adverse environments. These protections include:

  • Overcharge Protection
  • Over-discharge Protection
  • Overcurrent Protection
  • Short Circuit Protection
  • Overvoltage Protection
  • Over-temperature Protection
  • Reverse Connection Protection
  • Surge Protection
  • Lightning Protection
Diagram illustrating 9-fold safety protections of the UPS
Figure 3: 9-Fold Safety Protections

3. Setup Instructions

Please follow these steps carefully to set up your UGREEN US3000 UPS with your NAS device.

  1. Turn off NAS Device

    Before connecting, ensure the NAS device you intend to connect is powered off and its original power adapter is unplugged.

    Important Note:

    Before turning off the NAS device, please stop all data transfer tasks to avoid data loss.

  2. Connect to Mains Power

    Connect the DC IN port of the US3000 UPS to the original power adapter of your NAS, and then plug the NAS power adapter into a wall socket.

    Diagram showing UPS DC IN connected to NAS power adapter and then to wall socket
    Figure 4: Connecting UPS to Mains Power
  3. Connect NAS Device

    Connect the DC OUT port of the US3000 UPS to the power input port of your NAS device. Also, connect a data communication cable (USB) from the UPS to the NAS data transfer port.

    Diagram showing UPS DC OUT connected to NAS power input and USB data cable connection
    Figure 5: Connecting UPS to NAS Device
    Image of UGREEN UPS connected to a NAS device on a desk
    Figure 6: UGREEN UPS connected to NAS
  4. Initial Activation and Binding

    The product defaults to an energy-saving mode at the factory. Before use, it needs to be powered on to exit this mode. After product activation, it enters the charging state, and the white light will flash.

    After connecting the power adapter, UPS, and AToC communication cable, power on the NAS. Then, access the UGREEN Cloud mobile/PC client, navigate to the Control Panel, select "Hardware and Power," and enter the "Uninterruptible Power System" section to complete the US3000 binding process.

    Important Note:

    This product does not include a power adapter. Please use the original power adapter that came with your UGREEN NAS device.

4. Operating Instructions

The UGREEN US3000 UPS is designed for automatic and seamless operation to protect your data.

  • Automatic Identification: The UPS automatically identifies the power status and switches to battery backup when needed.
  • Seamless Power Supply: In the event of a power failure, the UPS immediately activates to supply power to the NAS with 0s interruption, ensuring continuous operation.
  • Data Protection: This immediate power supply ensures that data transmission is completed and provides sufficient time to save and safely shut down the NAS, protecting data integrity and hard disk safety.
  • APP Control: Utilize the UGREEN Cloud mobile/PC client for strategic control over NAS power on/off functions.
UPS providing extended power to NAS during an outage to prevent data loss
Figure 7: Extended Power Supply for Data Protection
Overview of UPS features including 120W output, 0s seamless power, 12000mAh battery, and compact design
Figure 8: UPS Features and Benefits

5. Maintenance

  • Proper Shutdown: When not using the product, always turn off the NAS device first, and then turn off the US3000 UPS. This sequence prevents data loss and potential NAS hard disk damage due to abrupt power interruption.
  • Battery Longevity: To ensure optimal performance and longevity of the internal lithium battery, it is recommended to use the product within 3 months after purchase. Long-term storage without use may affect the battery's quality.
Important notes on proper shutdown procedure and battery usage timeframe
Figure 9: Important Usage Notes

6. Troubleshooting

The US3000 UPS is designed to prevent common issues related to power interruptions. Here are some points to consider:

  • Power Outage Impact: Sudden power failures can lead to data loss (unsaved data) and file system corruption, making files inaccessible or causing errors. The US3000 UPS is specifically designed to mitigate these risks by providing immediate backup power.
  • Charging Indicator: If the white light on the device is flashing, it indicates that the product is in the charging state.
  • No Power Adapter Included: Remember that the UPS does not come with its own power adapter. Always use the original power adapter supplied with your NAS device for proper operation.
  • Energy-Saving Mode: If the device is not responding after initial setup, ensure it has been powered on to exit the factory default energy-saving mode.
Illustrations of data loss and file system damage risks from sudden power outages
Figure 10: Risks of Sudden Power Outages

7. Specifications

FeatureDetail
Model NameUS3000 120W DC UPS
Model Number45617
Battery TypeLithium-ion battery
Power Input InterfaceDC 5525
Input12V-10A / 19V-7.9A / 20V-7A
Output12V-10A 120W Max
Voltage Conversion Time0s
Output Power120W Max
Rated Battery Energy43.2Wh (14.4V 3000mAh)
Rated Battery Capacity12000mAh (4x3000mAh)
USB PortData communication
Package Length45 cm
Package Width25 cm
Package Height30 cm
Package Weight3.8 kg
Table of technical specifications for the US3000 UPS in Chinese
Figure 11: Technical Specifications (Original)

8. User Tips

  • Always ensure your NAS is properly shut down before disconnecting the UPS to prevent data corruption.
  • For optimal battery health, try to use the UPS within three months of purchase and avoid prolonged periods of inactivity.
  • If you experience any issues, double-check all cable connections and ensure the NAS power adapter is correctly connected to the UPS.
  • Familiarize yourself with the UGREEN Cloud client for advanced control and monitoring of your UPS and NAS.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact your retailer directly. Keep your purchase receipt as proof of purchase for any warranty claims.

10. Product Video

Video 1: Warehouse footage showing packaged products.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.