PAGANI DESIGN Apollo 500 Chronograph Quartz Watch

1. Introduction

Thank you for choosing the PAGANI DESIGN Apollo 500 Chronograph Quartz Watch. This timepiece combines luxury design with precise Japanese quartz movement, offering both style and functionality. This manual provides detailed instructions for the proper use and care of your watch.

2. Package Contents

Upon unboxing your PAGANI DESIGN Apollo 500 watch, please ensure all the following items are present:

• PAGANI DESIGN Apollo 500 Watch (Model PD-1779)
• Original Gift Box
• User Manual (this document)
• Warranty Card

3. Watch Components

Familiarize yourself with the main components of your watch:

1. Crown: Used for setting the time.
2. Top Pusher (A): Used to start and stop the chronograph.
3. Bottom Pusher (B): Used to reset the chronograph.
4. Main Dial: Displays the current time (hours, minutes, seconds).
5. Small Seconds Sub-dial: Located at 6 o'clock, displays the continuous running seconds of the watch.
6. 60-Minute Chronograph Sub-dial: Located at 3 o'clock, counts up to 60 minutes when the chronograph is active.
7. 24-Hour Indicator Sub-dial: Located at 9 o'clock, displays time in a 24-hour format, synchronized with the main time.
8. Tachymeter Bezel: Used for measuring speed over a known distance.

4. Setup

4.1 Setting the Time

1. Unscrew the crown (if applicable, this model features a screw-down crown for enhanced water resistance).
2. Pull the crown out to the second click position.
3. Rotate the crown to set the hour and minute hands to the desired time.
4. Once the time is set, push the crown back in to the first click position and screw it down firmly to ensure water resistance.

4.2 Resetting Chronograph Hands to Zero Position

If the chronograph hands (minute and second) are not at the zero position (12 o'clock) after resetting, they can be adjusted:

1. Unscrew the crown and pull it out to the second click position.
2. Press Pusher A (top pusher) to adjust the chronograph second hand to the zero position.
3. Press Pusher B (bottom pusher) to adjust the chronograph minute hand to the zero position.
4. Once adjusted, push the crown back in and screw it down firmly.

5. Operating Instructions

5.1 Timekeeping

Your watch continuously displays the current time with its hour, minute, and small seconds hands. The 24-hour sub-dial at 9 o'clock provides an AM/PM reference.

5.2 Using the Chronograph (Stopwatch)

The chronograph function allows you to measure elapsed time.

1. Start: Press Pusher A (top pusher) to start the chronograph. The large central second hand will begin to move, and the 60-minute sub-dial at 3 o'clock will track elapsed minutes.
2. Stop: Press Pusher A again to stop the chronograph. The elapsed time will be indicated by the central second hand and the 60-minute sub-dial.
3. Reset: After stopping the chronograph, press Pusher B (bottom pusher) to reset all chronograph hands to their zero positions.
4. Intermediate Time Measurement (Split Time): While the chronograph is running, press Pusher B to measure an intermediate time. The chronograph hands will stop to show the split time. Press Pusher B again to resume chronograph measurement. Press Pusher A to stop the chronograph, then Pusher B to reset.

5.3 Water Resistance

Your PAGANI DESIGN Apollo 500 watch has a water resistance rating of 10 Bar (100 meters / 330 feet). This means it is suitable for swimming, showering, and snorkeling. However, please observe the following precautions:

• Always ensure the crown is fully screwed down before exposing the watch to water.
• Do NOT operate the pushers or crown while the watch is wet or submerged.
• Avoid exposing the watch to hot water, steam, or extreme temperature changes, as this can compromise the water resistance seals.
• Water resistance is not a permanent condition and may diminish over time. It is recommended to have the water resistance seals checked periodically by a professional.

6. Maintenance and Care

6.1 Cleaning

To maintain the appearance of your watch:

• Wipe the case and sapphire crystal with a soft, dry cloth.
• For waterproof watches, you may use a slightly damp cloth with mild soap, then rinse thoroughly with fresh water and dry completely.
• Avoid using chemical cleaners, solvents, or abrasive materials.

6.2 Battery Replacement

Your watch is powered by a quartz movement, which requires a battery. When the watch stops or the second hand begins to jump erratically (indicating a low battery), it's time for a replacement. We recommend having the battery replaced by a qualified watchmaker or service center to ensure proper sealing and function.

6.3 Leather Strap Care

The leather strap is susceptible to wear and tear. To prolong its life:

• Avoid prolonged exposure to direct sunlight, extreme temperatures, and moisture.
• Clean with a soft, damp cloth and allow to air dry naturally.
• Avoid contact with perfumes, cosmetics, and oils, which can damage the leather.

7. Troubleshooting

• Watch not running: Check if the crown is fully pushed in. If it is, the battery may need replacement.
• Chronograph hands not resetting to zero: Follow the instructions in Section 4.2 to adjust the chronograph hands.
• Condensation inside the watch: This indicates a breach in the water resistance. Immediately take the watch to a professional for inspection and repair to prevent further damage.
• Inaccurate timekeeping: While quartz movements are highly accurate, significant deviation may indicate a low battery or a need for servicing.

8. Specifications

9. User Tips

• Regular Checks: Periodically check that the crown is fully screwed down, especially before any water exposure.
• Avoid Impacts: While the watch is shock-resistant, severe impacts can still cause damage. Handle with care.
• Temperature Extremes: Avoid exposing your watch to sudden and extreme temperature changes, as this can affect the movement and water resistance.
• Strap Comfort: Ensure the leather strap is not too tight or too loose for optimal comfort and to prevent excessive wear.

10. Warranty and Support

Your PAGANI DESIGN Apollo 500 watch comes with a warranty. Please refer to the included warranty card for specific terms, conditions, and duration of coverage. For any service, repairs, or support inquiries, please contact the authorized PAGANI DESIGN service center or your point of purchase. Always retain your proof of purchase and warranty card.