AKKO 3108RF

Contents

Akko 3108RF Mechanical Keyboard User Manual

Model: 3108RF

Introduction

The Akko 3108RF is a full-size mechanical keyboard designed for both office and gaming use. It features durable PBT double-shot keycaps, hot-swappable switches, and versatile dual-mode connectivity (2.4GHz wireless and USB Type-C wired). This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard to ensure optimal performance and longevity.

Akko 3108RF V3 Mechanical Keyboard banner with key features: PBT Keycaps, N-Key Rollover, Hot Swappable, 2.4GHz & USB Type C

Image: Akko 3108RF V3 Mechanical Keyboard highlighting PBT Keycaps, N-Key Rollover, Hot Swappable, and 2.4GHz & USB Type C connectivity.

Key Features

  • PBT Double-Shot Keycaps: Crafted from durable PBT plastic for long-lasting quality and resistance to wear and shine.
  • Akko Frost Pink Switches: Linear switches with an operating force of 45±5gf, total travel of 3.6±0.4mm, total travel force of 50±5gf, and pre-travel of 2.0±0.5mm.
  • Hot-Swappable Switches: Supports 3-pin switches, allowing for easy customization and replacement without soldering.
  • Dual-Mode Connectivity: Offers both 2.4GHz wireless and USB Type-C wired connection options for versatile use across various devices.
  • Full-Size Layout: A 108-key standard layout for comprehensive functionality.
  • N-Key Rollover: Ensures all key presses are registered accurately, even during rapid typing or complex gaming commands.
  • Adjustable Heights: Equipped with adjustable feet to customize the typing angle for ergonomic comfort.
  • Extended Battery Life: In 2.4G wireless mode, with two AAA batteries, the keyboard can last approximately 8 months with regular use.

Setup Guide

1. Unpacking

Carefully remove the keyboard and any accessories from the packaging. Ensure all components are present.

2. Battery Installation (for 3108RF Wireless Version)

The 3108RF version requires two AAA batteries for 2.4GHz wireless operation. Batteries are not included with international shipments.

  1. Locate the battery compartment on the underside of the keyboard.
  2. Open the battery compartment cover.
  3. Insert two AAA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.
Image showing the battery compartment on the underside of the keyboard with two AAA batteries being inserted.

Image: Battery compartment on the underside of the keyboard, showing where to insert two AAA batteries.

3. Connecting the Keyboard

Wired Connection (3108RF & 3108 V3)

Connect the provided USB Type-C cable to the keyboard's Type-C port and the other end to an available USB port on your computer (Desktop or Laptop). The keyboard will be automatically recognized and ready for use.

2.4GHz Wireless Connection (3108RF Only)

For wireless operation, ensure batteries are installed (see step 2).

  1. Locate the 2.4GHz USB receiver (dongle), usually found in a storage slot on the keyboard or in the packaging.
  2. Plug the USB receiver into an available USB port on your computer.
  3. Turn on the keyboard using the power switch (if available). The keyboard should automatically connect to the receiver.
Diagram illustrating 2.4GHz wireless connection to a MacBook/Notebook and USB Type-C wired connection to a Mac PC.

Image: Diagram showing the keyboard connecting to a MacBook/Notebook via 2.4GHz wireless and to a Mac PC via USB Type-C wired connection.

4. Switch Installation (Hot-Swappable Keyboards)

The Akko 3108RF supports hot-swapping of 3-pin switches. 5-pin switches are NOT supported. Exercise caution when installing or replacing switches.

  1. Gently remove the keycap using a keycap puller.
  2. If replacing a switch, use a switch puller to carefully remove the existing switch.
  3. Align the pins of the new 3-pin switch with the holes on the PCB.
  4. Insert the switch vertically and apply gentle, even pressure until it clicks into place.
  5. IMPORTANT: Ensure the pins are straight and align carefully to avoid bending or damaging them. Do not force the switch.
  6. Replace the keycap.
Close-up of Akko Frost Pink mechanical switches visible under translucent keycaps.

Image: Close-up of Akko Frost Pink switches under keycaps, demonstrating the hot-swappable feature.

Operating Instructions

1. Switching Between Modes (3108RF Only)

The 3108RF keyboard can operate in either wired (USB Type-C) or 2.4GHz wireless mode. Use the switch located on the keyboard's underside or side to toggle between modes. When connected via USB-C, the keyboard will prioritize the wired connection.

2. Adjustable Keyboard Height

The keyboard features adjustable feet on its underside, allowing you to change the typing angle. Flip out the feet to raise the keyboard to your preferred ergonomic position. There are typically two levels of adjustment.

Underside of the keyboard showing the adjustable feet in an extended position.

Image: Underside of the keyboard with adjustable feet extended, allowing for a customized typing angle.

3. N-Key Rollover

The keyboard supports N-Key Rollover, meaning all simultaneous key presses will be registered accurately. This is particularly beneficial for fast typists and gamers.

Maintenance

1. Cleaning the Keyboard

  • General Cleaning: Use a soft, lint-free cloth to wipe down the keycaps and frame. For stubborn dirt, slightly dampen the cloth with water or a mild cleaning solution.
  • Dust Removal: Use compressed air to blow out dust and debris from between the keycaps.
  • Deep Cleaning: For thorough cleaning, keycaps can be removed using a keycap puller and washed with mild soap and water. Ensure keycaps are completely dry before reattaching.

2. Keycap and Switch Care

  • PBT Keycaps: The PBT material is resistant to shine and wear, but avoid harsh chemicals that could damage the legends.
  • Switch Replacement: If replacing switches, always use a switch puller and insert new switches carefully and vertically to prevent bending pins or damaging the hot-swap sockets. Avoid frequent switch replacement unless necessary.

Troubleshooting

1. Keyboard Not Responding (Wired)

  • Ensure the USB Type-C cable is securely connected to both the keyboard and the computer.
  • Try connecting the keyboard to a different USB port on your computer.
  • Test the keyboard on another computer to rule out a computer-specific issue.
  • If possible, try a different USB Type-C cable.

2. Keyboard Not Responding (2.4GHz Wireless)

  • Ensure the keyboard has fresh AAA batteries installed and the power switch is ON.
  • Verify that the 2.4GHz USB receiver is securely plugged into a USB port on your computer.
  • Try plugging the USB receiver into a different USB port.
  • Ensure the keyboard is within range of the USB receiver (typically up to 10 meters).
  • Re-pair the keyboard with the receiver if necessary (refer to specific pairing instructions if provided with your model, usually involves a key combination).

3. Specific Keys Not Working

  • Carefully remove the keycap of the non-functioning key.
  • If it's a hot-swappable switch, gently remove the switch using a switch puller.
  • Inspect the switch pins for any bends or damage. Straighten bent pins carefully or replace the switch if damaged.
  • Reinsert the switch and keycap, ensuring proper alignment.

4. Unexpected Input or Ghosting

  • Ensure the keyboard is clean and free of debris that might be causing keys to stick.
  • Check for any software conflicts or background applications that might be interfering with keyboard input.
  • If using wireless, ensure there are no strong sources of interference (e.g., other wireless devices) nearby.

Specifications

FeatureDetail
Brand NameAKKO
Model3108RF
Keyboard Standard108 Keys (Full Size)
Operation StyleMechanical
SwitchesAkko Frost Pink (Linear)
Switches Hot SwapYes (Supports 3-pin switches; insert vertically, align pins carefully, avoid forcing to prevent damage.)
Keycap MaterialPBT plastic
Keycap PrintingDoubleshot
Keycap ProfileCherry (Prunus Lannesiana, Black Gold and Glacier) & MOA (Pink and Yellow)
Backlight TypeNo backlight
ConnectionRF V3: 2.4GHz & USB Type C; V3: Wired
Interface TypeUSB
N-Key RolloverSupport
Battery IncludedNo (Requires 2xAAA for RF version)
Wrist SupportNo
ApplicationDesktop, Laptop
Operating SystemsWindows / macOS / iOS / Android
LanguageEnglish
OriginMainland China
CertificationCE, WEEE
Dimensions (L x W x H)48 cm x 18 cm x 6 cm
Weight1.6 kg
Force Travel Diagram for Akko Frost Pink switches, showing operating point and reset point relative to force and travel.

Image: Force Travel Diagram for Akko Frost Pink switches, detailing operating force, total travel, and pre-travel.

User Tips

  • Hot-Swap Caution: When changing switches, always ensure the keyboard is unplugged or powered off. Take extra care to align the switch pins perfectly with the sockets to avoid bending them.
  • Battery Management: For the 3108RF wireless version, keep spare AAA batteries on hand for uninterrupted wireless use. Consider rechargeable AAA batteries for environmental friendliness.
  • Cable Management: Utilize the detachable USB cable to reduce clutter when using the keyboard in wireless mode or for easier transport.
  • Ergonomics: Experiment with the adjustable feet to find the most comfortable typing angle for your setup, which can help reduce wrist strain during long sessions.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Akko website or contact the retailer where you purchased the product. Keep your proof of purchase for warranty claims.

  • Fast Delivery & Refunds: The manufacturer offers service commitments including potential coupon codes if delivery is delayed, and refunds if the package is lost or items are damaged.
  • Security & Privacy: Your personal details are protected and not shared with third parties without consent.
  • Certified Original: The product is certified original.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.