UKGF M10

Contents

UKGF M10 TWS Bluetooth Earbuds User Manual

Model: M10 | Brand: UKGF

Introduction

Thank you for choosing the UKGF M10 TWS Bluetooth Earbuds. These wireless earphones feature Bluetooth 5.1 technology, 9D stereo sound, active noise-cancellation, and a waterproof design, making them ideal for sports and daily use. The included charging case also functions as a portable power bank for your mobile devices. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your earbuds.

UKGF M10 TWS Earbuds with LED display, 9D Bass HIFI, Bluetooth 5.1
Figure 1: UKGF M10 TWS Bluetooth Earbuds and Charging Case

Package Contents

Please check the package for the following items:

  • UKGF M10 TWS Bluetooth Earbuds (Left and Right)
  • Charging Case
  • Charging Cable
  • User Manual (this document)

Specifications

FeatureSpecification
Brand NameUKGF
ModelM10
MaterialABS
CategoryEarphones & Headphones
CommunicationWireless (Bluetooth)
Bluetooth Version5.1
Wireless Range<10m
Vocalism PrincipleHybrid Technology
Active Noise-CancellationYes
Control ButtonYes (Touch Control)
Volume ControlYes
With MicrophoneYes
Impedance Rangeup to 32 Ω
Frequency Response Range20 - 20000Hz
Sensitivity10dB
Driver Diameter10mm
Max Output1000mW
Total Harmonic Distortion1%
Earcups TypeSemi-open
Headphone Pads MaterialSilicone
Magnet TypeNeodymium
Charging Case Capacity3500mAh
Music Play TimeAround 4-5 Hours (single charge)
Cumulative Play Time (with case)180 Hours
Cumulative Call Time (with case)220 Hours
Cumulative Charging Times (case)40 times
Charging MethodCharging case
Waterproof RatingIPX7
Support APPYes
Support Memory CardNo
FeaturesAmazon Alexa Support, Apple Siri Support, Google Assistant Support, Auto Pairing, Binaural Call
CertificationCE
Product Dimensions (L x W x H)16cm x 14cm x 3cm
Product Weight0.077 kg

Setup

1. Initial Charging

Before first use, ensure both the earbuds and the charging case are fully charged.

  1. Place the earbuds into the charging case.
  2. Connect the charging cable to the charging case and a USB power source.
  3. The LED display on the charging case will show the battery percentage for the case and individual earbuds.
  4. Charge until the display shows 100% for both the case and earbuds.
Charging case with LED display showing battery percentages
Figure 2: LED Display on Charging Case indicating battery levels

2. Pairing with Your Device

The earbuds support automatic pairing for quick connection.

  1. Open the charging case. The earbuds will automatically power on and enter pairing mode.
  2. On your mobile device (smartphone, tablet, etc.), go to Bluetooth settings.
  3. Search for available devices and select "M10" (or similar name) from the list.
  4. Once connected, you will hear a confirmation tone, and the earbuds will be ready for use.
  5. The earbuds will automatically reconnect to the last paired device when taken out of the case.
Earbuds automatically connecting to a mobile phone
Figure 3: Automatic Pairing Process

Operating Instructions

Touch Controls

The M10 earbuds feature intuitive touch controls on each earbud. Refer to the diagram below for specific functions:

Diagram of earbud touch controls
Figure 4: Earbud Touch Control Functions
  • Song Switching: Touch the earphone twice.
  • Answer/Hang Up Call: Touch the earphone once.
  • Summon Voice Assistant (Siri/Google Assistant/Alexa): Touch the earphone for two seconds.
  • Turn On/Off: Touch the earphone for five seconds.
  • Play/Pause Music: Touch the earphone once.
  • Volume Adjustment: Touch the earphone three times.

Single and Binaural Mode

The earbuds support both single and binaural (stereo) use. You can connect both earbuds to your device for stereo sound or use a single earbud independently for calls or mono audio.

Illustration of single and binaural earbud usage
Figure 5: Binaural Separation Design for flexible use

Charging Your Mobile Phone

The charging case can also function as a portable power bank to charge your mobile phone or other small USB-powered devices.

  1. Connect your phone's charging cable to the USB output port on the charging case.
  2. The charging case will begin to charge your device.
Charging case connected to a smartphone for charging
Figure 6: Charging a mobile phone with the earbud case

Maintenance

Cleaning

  • Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
  • Do not use abrasive cleaners, alcohol, or chemical solvents.
  • Ensure charging contacts on both earbuds and case are clean and dry for proper charging.

Water Resistance (IPX7)

The M10 earbuds are IPX7 waterproof, meaning they can withstand immersion in water up to 1 meter for 30 minutes. They are sweat-proof and suitable for use during exercise or in the bath. However, the charging case is NOT waterproof. Do not immerse the charging case in water.

  • Do not charge the earbuds if they are wet. Ensure they are completely dry before placing them back into the charging case.
  • Avoid exposing the charging case to water or excessive moisture.
IPX7 Waterproof earbuds submerged in water
Figure 7: IPX7 Waterproof Feature

Storage

  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid extreme temperatures and direct sunlight.

Troubleshooting

If you encounter any issues with your M10 earbuds, please refer to the following common solutions:

ProblemPossible Solution
Earbuds not pairing
  • Ensure both earbuds are charged.
  • Place earbuds back in the case, close, then reopen to re-initiate pairing mode.
  • Turn off Bluetooth on your device, then turn it back on.
  • Forget "M10" in your device's Bluetooth settings and try pairing again.
  • Ensure no other Bluetooth devices are interfering.
Only one earbud working
  • Ensure both earbuds are charged.
  • Place both earbuds back into the charging case, close the lid, wait a few seconds, then open the lid and take them out together.
  • Try resetting the earbuds (refer to manufacturer's specific reset instructions if available, otherwise, forgetting the device and re-pairing often works).
Earbuds not charging
  • Ensure the charging case has power (check LED display).
  • Verify the charging cable is securely connected to both the case and the power source.
  • Clean the charging contacts on the earbuds and inside the case with a dry cotton swab.
Low volume or poor sound quality
  • Adjust the volume on both your device and using the earbud touch controls.
  • Ensure earbuds are properly seated in your ears for a good seal.
  • Clean any earwax or debris from the earbud mesh.
  • Try moving closer to your connected device to avoid signal interference.

User Tips

Based on common user experiences with similar products, here are some tips for getting the most out of your M10 earbuds:

  • Monitor Battery Levels: Regularly check the LED display on the charging case to know the battery status of both the case and individual earbuds. This helps avoid unexpected power loss.
  • Utilize Power Bank Feature: The 3500mAh charging case can be a lifesaver for your phone in emergencies. Keep it charged to take advantage of this feature.
  • Experiment with Eartips: For optimal sound quality and comfort, try different sizes of eartips (if included, though not explicitly listed in package contents, it's a common accessory). A good seal is crucial for bass response and noise isolation.
  • Practice Touch Controls: The touch controls offer many functions. Take some time to practice the different taps and holds to become proficient without needing to pull out your phone.
  • Keep Contacts Clean: If you notice inconsistent charging, gently clean the metal charging contacts on both the earbuds and inside the case with a dry cotton swab.

Warranty and Support

The UKGF M10 TWS Bluetooth Earbuds are CE certified, indicating compliance with European safety, health, and environmental protection requirements.

For warranty information, technical support, or any other inquiries, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.