1. Product Overview
The Akko 5087 V3 is an 80% TKL layout mechanical keyboard designed for versatile use across multiple operating systems and devices. It features tri-mode connectivity, hot-swappable switches, and customizable RGB backlighting.
Key Features:
- 80% TKL Layout: Compact design with 88 keys.
- Gasket Mount Structure: Provides enhanced flex, reduced vibration, and a deep, refined typing sound.
- Tri-mode Connectivity: Supports 2.4GHz wireless, Bluetooth 5.0, and USB Type-C wired connections.
- Hot-Swappable Switches: Equipped with premium 5-pin hot-swappable sockets, allowing users to easily change switches without soldering.
- Akko V3 Piano Pro Switches: Linear switches with an operating force of 45±5gf, total travel of 3.1mm, and pre-travel of 1.9±0.5mm.
- PBT Dye-Sub Keycaps: Durable keycaps with legends that resist fading and wear.
- RGB Backlighting: South-facing RGB with a side light bar, offering over 16 million customizable colors, adjustable brightness, and animation speed.
- Long-lasting Battery: Built-in 10000mAh battery (Lord of Mysteries version: 8000mAh) for extended use.
- Akko Cloud Driver: Software for full customization of lighting, keys, and macros.
2. Setup Instructions
2.1. Operating System Switch
The keyboard features a physical switch on the bottom to select the operating system mode (Windows or Mac). Ensure the switch is set correctly for your device.
- Left Position: Windows Mode (Internal Power Supply ON)
- Middle Position: Mac Mode by Default (Internal Power Supply OFF)
- Right Position: Mac Mode (Internal Power Supply ON)
2.2. Switching to Bluetooth Mode
The keyboard supports Bluetooth 5.0 and Bluetooth 3.0. You can pair up to 3 Bluetooth devices.
- When unplugged: Turn the back switch to ON. Long press and hold
Fn + E,Fn + R, orFn + Tto initiate Bluetooth pairing. The blue LEDs under the corresponding keys will flash quickly, indicating pairing mode. - When plugged into USB: The keyboard will automatically enter Bluetooth mode. Long press and hold
Fn + E,Fn + R, orFn + Tto enable Bluetooth pairing. The blue LEDs under the corresponding keys will flash quickly.
2.3. Setting the Bluetooth Profile
To help identify individual Bluetooth devices, the keyboard is equipped with both Bluetooth 5.0 and 3.0 frameworks. When pairing, your device will search for:
- Bluetooth 5.0:
5087BP-1/5087BP-2/5087BP-3 - Bluetooth 3.0:
Akko 5087BP BT3.0
Select the Bluetooth group based on your preference. Note that some devices may only detect Bluetooth 5.0 profiles. Once paired, the system will remember the last connected device before Bluetooth mode is turned off.
2.4. 2.4GHz Wireless Connection
The 5087 V3 includes a 2.4GHz wireless receiver for low-latency connectivity. To use this mode:
- Plug the 2.4GHz receiver into an available USB port on your computer.
- Short press
Fn + Yon the keyboard. The green LED will flash slowly, indicating connection. - The lighting effect will be restored once the pairing is successful.
3. Operating Instructions
3.1. HotKeys (Windows)
The following key combinations are applicable to Windows systems. Combinations may vary with system updates.
| Combination | Function |
|---|---|
| Fn + F1 | File Explorer |
| Fn + F2 | |
| Fn + F3 | Windows Search |
| Fn + F4 | Browser Homepage |
| Fn + F5 | Media |
| Fn + F6 | Pause / Playback |
| Fn + F7 | Previous Song |
| Fn + F8 | Next Song |
| Fn + W | Swap WASD with Arrow Keys |
| Fn + C | Calculator |
| Fn + M | Mute |
| Fn + < | Decrease Volume |
| Fn + > | Increase Volume |
3.2. System Commands (Windows)
| Command | Action |
|---|---|
| Fn + Left Win / Right Win | Lock Windows Key |
| Press and hold Left Win + Right Win for 5 seconds | Restore Factory Settings |
| Hold down Fn and press Right Ctrl | Revert Ctrl into Menu (APP) key |
3.3. HotKeys & System Commands (Mac)
| Combination | Function |
|---|---|
| F1 | Decrease Display Brightness |
| F2 | Increase Display Brightness |
| F3 | Open Mission Control |
| F4 | Activate Siri |
| F7 | Skip Back (Audio) |
| F8 | Pause/Play (Audio) |
| F9 | Skip Forward (Audio) |
| F10 | Mute |
| F11 | Volume Down |
| F12 | Volume Up |
| Right Win | Command |
| Right Alt | Option |
| Left Win | Command |
| Left Alt | Option |
| Fn + (F1~F12) | F1~F12 (Standard Function Keys) |
3.4. Backlight Settings
The keyboard features customizable RGB backlighting. Use the following combinations to adjust the lighting effects:
| Combination | Function |
|---|---|
| Fn + Ins | Cycle through Effect 1 / Effect 2 / Effect 3 |
| Fn + Home | Cycle through Effect 4 / Effect 5 / Effect 6 |
| Fn + PgUp | Cycle through Effect 7 / Effect 8 / Effect 9 / Effect 10 |
| Fn + Del | Cycle through Effect 11 / Effect 12 / Effect 13 |
| Fn + End | Cycle through Effect 14 / Effect 15 / Effect 16 |
| Fn + PgDn | Cycle through Effect 17 / Effect 18 / Effect 19 |
| Fn + L | Backlight On/Off |
| Fn + ↑ | Increase Brightness |
| Fn + ↓ | Decrease Brightness |
| Fn + ← | Set Animation Direction Left |
| Fn + → | Set Animation Direction Right |
| Fn + - | Slower Animation |
| Fn + = | Faster Animation |
3.5. Akko Cloud Driver for Customization
The Akko Cloud Driver software allows for full customization of key functions, lighting effects, and macros. This customization must be performed in wired or 2.4GHz wireless mode.
- Download: The Akko Cloud Driver can be downloaded from the official Akko website: www.akkogear.com.
- Functionality: Customize key assignments, create macros, and design unique RGB lighting patterns. In wired mode, lighting effects can also achieve music rhythm effects.
4. Maintenance
4.1. Power Management
- Shutting Off: To conserve battery life, turn off the keyboard using the back switch when not in use.
- Sleep Mode: If the keyboard remains unused for over 10 minutes, it will enter sleep mode. Press any key to wake it up.
- Note: The battery saver mode in Windows systems may affect or delay the keyboard's sleep activation time.
4.2. Cleaning
To clean your keyboard, gently wipe the keycaps and case with a soft, damp cloth. Avoid using harsh chemicals or excessive moisture. For deeper cleaning, you may carefully remove keycaps (using a keycap puller) and clean the switches and plate.
4.3. Hot-Swappable Switches
The Akko 5087 V3 supports 3-pin and 5-pin hot-swappable switches. To replace switches:
- Carefully remove the keycap using a keycap puller.
- Use a switch puller to gently remove the switch from its socket.
- Align the pins of the new switch with the holes in the PCB and press down firmly until it clicks into place. Ensure pins are not bent.
- Replace the keycap.
5. Troubleshooting
5.1. Bluetooth Connection Issues
- Switching Devices: If you have paired multiple Bluetooth devices, short press
Fn + E,Fn + R, orFn + Tto quickly switch between them. - Resetting Bluetooth: If you forget a specific paired device or experience connection disorder, you may need to clear your computer's Bluetooth cache. Remove the 5087 keyboard from your computer's list of connected Bluetooth devices and then re-pair it.
- Compatibility: Ensure your device supports the Bluetooth version (5.0 or 3.0) that the keyboard is broadcasting.
5.2. Keyboard Not Responding
- Battery: Check the battery level. If low, connect the keyboard via USB-C to charge.
- Connection Mode: Ensure the keyboard is in the correct connection mode (wired, 2.4GHz, or Bluetooth) for your setup.
- OS Switch: Verify the OS switch on the bottom of the keyboard is set to the correct operating system (Windows/Mac).
- Factory Reset: If issues persist, perform a factory reset by pressing and holding
Left Win + Right Winfor 5 seconds.
5.3. Backlighting Issues
- Brightness: Adjust brightness using
Fn + ↑(increase) andFn + ↓(decrease). - Backlight On/Off: Toggle backlight with
Fn + L. - Driver: Ensure the Akko Cloud Driver is installed and updated for full customization and troubleshooting of lighting effects.
6. Specifications
| Attribute | Specification |
|---|---|
| Dimensions | Approximately 360*132*40mm |
| Weight | Approximately 0.9kg |
| Country of Origin | Mainland China |
| Type | Mechanical Keyboard |
| Keyboard Standard | 88 Keys (80% TKL Layout) |
| Keycap Material | PBT plastic |
| Keycap Printing | Dye-sublimation |
| Connection | Bluetooth 5.0 / 2.4GHz / USB Type-C (Tri-mode) |
| Interface Type | USB, Bluetooth, Bluetooth / USB |
| Battery Capacity | 10000mAh (Lord of Mysteries: 8000mAh) |
| Battery Included | Yes |
| Multimedia Keys | Yes |
| N-Key Rollover | Support |
| Switches Hot Swap | Yes (3-Pin / 5-Pin Support) |
| Axis Body Brand | Akko |
| Switches | Akko V3 Piano Pro |
| Backlight Type | MULTICOLOR (South-facing RGB) |
| Key/Lighting Effects Customization | Programmable through Akko Web & Cloud Driver in wired or 2.4G mode. |
| Polling Rate | 1000Hz (wired and 2.4G mode), 125Hz (Bluetooth mode) |
| Macro | Akko Web & Cloud Driver |
| Materials | PBT Keycaps + ABS Frame |
| Operating Systems | Windows / macOS / iOS / Android |
| Structure | Gasket Mount |
| Application | Desktop, Laptop, Tablet |
| Certification | CE, WEEE |
7. User Tips
- Maximize Connectivity: Take advantage of the tri-mode connectivity to seamlessly switch between your PC, laptop, tablet, and smartphone.
- Personalize Your Experience: Use the Akko Cloud Driver to customize key functions, create macros, and design unique RGB lighting effects to match your setup and mood.
- Experiment with Switches: Since the keyboard is hot-swappable, don't hesitate to try different 3-pin or 5-pin mechanical switches to find your preferred typing feel.
- Optimize Battery Life: Remember to turn off the keyboard using the physical switch when not in use for extended periods to prolong battery life.
- Keep it Clean: Regular cleaning of keycaps and the keyboard body will maintain its aesthetic and functional integrity.
8. Warranty and Support
Akko provides a 1-year warranty for non-human damage for customers in mainland China, starting from the date of purchase. For other regions, please contact your seller (Akko distributor) for specific warranty policies.
- If the warranty period expires, repair services will be provided at a cost not exceeding the average market price.
- Self-disassembly of the keyboard without manufacturer/seller instructions will immediately void the warranty.
- The return and warranty policy may vary across different platforms and are subject to the specific distributor at the time of purchase.
Precautions:
Man-made damage, which is not covered by warranty, includes but is not limited to:
- Immersion in liquids.
- Falling from a height.
- Excessive force applied to wires or components.
As an electronic product, please handle your keyboard with care and follow proper electronic product protection methods.
For a detailed user manual in PDF format, you can refer to the official document: Akko 5087B Plus User Manual (PDF).
9. Frequently Asked Questions (FAQ)
- Q: How do I switch between wired, 2.4GHz, and Bluetooth modes?
- A: For Bluetooth, long press Fn+E/R/T. For 2.4GHz wireless, plug in the receiver and short press Fn+Y. For wired, simply connect the USB-C cable.
- Q: Can I customize the RGB lighting?
- A: Yes, the keyboard features customizable RGB backlighting. You can use Fn key combinations for basic adjustments (brightness, effects, speed) or download the Akko Cloud Driver for full customization, including 16 million colors and music rhythm effects.
- Q: What operating systems are supported?
- A: The Akko 5087 V3 supports Windows, macOS, iOS, and Android. Use the physical switch on the bottom of the keyboard to select the appropriate OS mode.
- Q: What is the battery capacity and how long does it last?
- A: The keyboard has a 10000mAh battery (8000mAh for the Lord of Mysteries version). Actual battery life varies depending on usage, backlight settings, and connection mode. Turning off the keyboard when not in use helps conserve power.
- Q: Is the keyboard hot-swappable?
- A: Yes, it is equipped with 5-pin hot-swappable sockets, allowing you to easily change switches without soldering.