1. Introduction
Thank you for choosing the Heimerdinger LB338 Automatic Rebar Tying Machine. This cordless, rechargeable tool is designed to efficiently tie rebar in construction, highway tunnels, and bridge projects, significantly reducing manual labor. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new rebar tying machine. Please read it thoroughly before use and keep it for future reference.
2. Safety Instructions
Always observe basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Failure to follow these instructions may result in serious injury.
- **Work Area Safety:** Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- **Personal Safety:** Always wear appropriate personal protective equipment (PPE), including safety glasses or goggles, hearing protection, and work gloves. Dress properly; avoid loose clothing or jewelry that can get caught in moving parts.
- **Tool Handling:** Ensure the switch is in the off-position before connecting to a battery pack, picking up or carrying the tool. Accidental starting can lead to injury.
- **Battery Safety:** Use only battery packs specified by the manufacturer. Ensure the battery is fully charged before use. Do not expose battery packs to extreme heat or water.
- **Switch Protection Lock:** The LB338 features an intelligent switch safety lock to prevent accidental activation. Always engage the lock when the tool is not in use or during maintenance.
3. Product Overview
Components
Specifications
| Feature | Detail |
|---|---|
| Model Number | LB338 |
| Brand Name | Heimerdinger |
| Voltage | DC18-21V |
| Power | 150W |
| Binding Range | 8-34mm |
| Wire Diameter | 0.8mm |
| Power Source | Battery |
| Tool Type | Automatic Rebar Tying Machine |
| Application | Construction buildings, highway tunnels, bridge projects, Commercial Manufacture |
| Battery Included | No (for base model, available with various battery options) |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 49cm x 35cm x 20cm |
| Package Weight | 5.0 kg |
Dimensions
4. Setup
4.1 Battery Installation
- Ensure the power switch is in the "OFF" position and the switch protection lock is engaged.
- Align the battery pack with the battery port at the base of the tool.
- Slide the battery pack into place until it clicks securely.
- To remove, press the battery release button and slide the battery out.
The LB338 is compatible with Makita 18V B series lithium batteries (e.g., BL1850B, BL1840B, BL1830B, BL1430B, BL1820B, BL1850, BL1840, BL1440, BL1415, BL1815N). It is NOT compatible with G Series batteries (e.g., BL1813G, BL1413G, BL1415G, BL1430G, BL1815G) or 18V Ni-CD batteries (e.g., 1822).
4.2 Wire Spool Installation
- Ensure the power switch is in the "OFF" position and the switch protection lock is engaged.
- Open the transparent back cover of the wire spool compartment.
- Place the new wire spool into the compartment, ensuring the wire feeds correctly into the mechanism.
- Press the latch button to secure the wire spool in place.
- Close the transparent back cover.
4.3 Gear Adjustment
The LB338 features adjustable gears to control the binding strength, allowing it to adapt to various rebar sizes and environmental conditions.
- Locate the gear adjustment button on the side of the tool.
- Rotate the button to select the desired gear setting.
- A larger gear number corresponds to a stronger binding force.
- Adjust the gear setting based on the diameter of the rebar and the required tightness of the tie.
5. Operating Instructions
Follow these steps for efficient and safe rebar tying:
- **Power On:** Ensure a charged battery is installed and the switch protection lock is disengaged. Press the power switch to turn on the tool.
- **Positioning:** Place the positioning sleeve of the tool over the intersection of the rebars you wish to tie. Ensure both rebars are securely within the tying mechanism.
- **Tying:** Press the trigger. The machine will automatically wrap and tie the wire around the rebar intersection. The process is designed to be quick, taking approximately 0.8 seconds per section.
- **Repeat:** Move to the next rebar intersection and repeat the process.
- **Power Off:** When finished, release the trigger, engage the switch protection lock, and turn off the power switch.
6. Maintenance
- **Cleaning:** Regularly clean the tool, especially the tying mechanism and wire path, to prevent debris buildup. Use a dry cloth or soft brush. Do not use solvents or harsh chemicals.
- **Wire Spool Replacement:** Replace the wire spool as described in Section 4.2 when the wire runs out.
- **Battery Care:**
- Charge batteries fully before storage and every few months if not in regular use.
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not attempt to open or repair damaged battery packs.
- **Inspection:** Periodically inspect the tool for any signs of wear, damage, or loose components. If any issues are found, discontinue use and contact customer support.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not power on | Dead battery, battery not properly installed, power switch off, safety lock engaged. | Charge battery, re-install battery, turn on power switch, disengage safety lock. |
| Weak or incomplete ties | Incorrect gear setting, worn wire, debris in tying mechanism. | Adjust to a higher gear setting (see Section 4.3), replace wire spool, clean tying mechanism. |
| Wire jamming or not feeding | Improper wire spool installation, wire tangled, debris in wire path. | Re-install wire spool correctly, untangle wire, clean wire path. |
| Tool overheats | Continuous heavy use. | Allow the tool to cool down. Reduce continuous operation time. |
8. User Tips
- If you experience weak ties, try increasing the gear setting. The machine offers adjustable binding strength, and a higher gear number will result in a tighter tie.
- Regularly check the wire spool for sufficient wire to avoid interruptions during work.
- Keep spare wire spools and charged batteries on hand for continuous operation on large projects.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please contact your retailer or the Heimerdinger Official Store directly. Keep your purchase receipt as proof of purchase.
Heimerdinger Official Store: Visit Store