1. Introduction
Thank you for choosing the HXCONTROLLER MPPT Solar Charge Controller. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your device.
1.1 Overview
This product is designed to detect the power generation of solar panels in real-time and track the highest voltage and current (V-I) to charge batteries at maximum power output. It is a core control component for off-grid photovoltaic systems, coordinating the work of solar panels, batteries, and loads.
The controller features an LCD display for operating status and parameters, allowing users to easily access and modify settings. It includes comprehensive electronic fault self-test and powerful electronic protection functions to minimize damage from installation errors and system failures.
1.2 Key Features
- Advanced MPPT Charging Mode: Achieves maximum efficiency (≥98.1%) and PV utilization (≥99%), with a built-in DSP controller.
- Wide Battery Compatibility: Supports various battery types including USER (customizable for Lithium, LiFePO4, Li(NiCoMn)O2), Vented, Flooded, Sealed, Gel, and NiCd batteries.
- Built-in WiFi Device: Allows for convenient monitoring of the controller's working status via a mobile app (iOS and Android).
- High Voltage Input: Supports a maximum input open circuit voltage of 480VDC, enabling more solar panels to be connected in series.
- Efficient Heat Dissipation: Features intelligent fan cooling (activates at >45℃, deactivates at <40℃) and porous heat dissipation for extended product life.
- Comprehensive Protection: Includes self-recovery, reverse connect protection, over-current protection, short-circuit protection, open-circuit protection, and high-temperature protection.
- HD Colorful Display: Provides clear visualization of solar panel voltage, battery voltage, charging current, daily/total cumulative power generation, device temperature, battery type, and other parameters.

Figure 1.1: Product overview highlighting features like 24V-192V auto battery voltage, 60/120A current, built-in WiFi, 480VDC max PV input, and universal battery compatibility.
2. Safety Instructions
Please read these safety instructions carefully before installation and operation to prevent injury or damage to the equipment.
- The voltage applicable to this controller can exceed human body safety voltage. Only operate this controller after completing safety operation training.
- Do not disassemble or repair the controller yourself. There are no user-serviceable components inside.
- Install the controller indoors to avoid exposure to components and prevent water from entering.
- Ensure the installation area is well-ventilated, as the heat sink can become very hot during operation.
- Install suitable fuses or circuit breakers outside the controller.
- Before installing or adjusting wiring, disconnect the photovoltaic array and battery terminal fuses/circuit breakers.
- After installation, check all wiring connections for tightness to prevent heat accumulation and potential hazards.
2.1 Installation Precautions
- Battery Handling: Exercise extreme care when installing batteries. For open lead-acid batteries, wear protective goggles and rinse immediately with clean water if contact with battery acid occurs.
- Short Circuits: Avoid placing metal objects near the battery to prevent short circuits.
- Ventilation: Ensure good ventilation around the battery, especially during charging, as acidic and combustible gases may be generated.
- Sparks: Keep away from sparks as batteries can produce combustible gases.
- Wiring Connections: Virtual connections or corroded wires can cause significant heating, melting of insulation, and fire. Ensure all connections are tight. Use zip ties to secure wires in mobile applications to prevent loosening.
- High Voltage: The output voltage of the component may exceed human body safety voltage. Use insulated tools and ensure hands are dry during operation.
- Battery Terminals: The controller's battery terminals can connect to either the same battery or the same set of batteries.
- Battery Manufacturer Guidelines: Always follow the safety recommendations of the battery manufacturer.
- Wire Sizing: Select system connection wires according to a current density not exceeding 4A/mm².
- Grounding: Ground the ground terminal of the controller.
3. Setup
3.1 Installation Safety Distance
To ensure effective heat dissipation, maintain the following clearances around the controller:
- Left/Right: 20CM
- Top/Bottom: 30CM

Figure 3.1: Controller dimensions and recommended safety clearances for installation.
3.2 Line Connection Requirements
Follow this sequence for connecting the components:
- Connect the positive and negative terminals of the battery.
- Connect the positive and negative terminals of the DC load.
- Finally, connect the positive and negative terminals of the solar panel.

Figure 3.2: System connection diagram for solar panel, MPPT controller, battery, and DC loads.

Figure 3.3: Controller dimensions and a simplified wiring overview.
3.3 Max PV Input Configuration
The controller supports a maximum input open circuit voltage of 480VDC. This allows for connecting more solar panels in series, reducing wiring specifications and system costs. For example, with solar panels having a Vmp voltage of 38-42V, you can connect up to 9-10 panels in series. Ensure the total solar panel open circuit voltage does not exceed the controller's maximum limit to prevent damage.

Figure 3.4: Max 480VDC input allows for more solar panels in series compared to lower voltage controllers.
4. Operating Instructions
4.1 Main Interface Operation
The controller features an LCD display and four buttons: ESC, UP, DOWN, and SET. These buttons are used to navigate menus and adjust parameters.
Video 4.1: Demonstration of navigating the controller's display and settings using the ESC, UP, DOWN, and SET buttons.
Display Elements and Buttons:
| Number | Name | Description |
|---|---|---|
| 1 | Solar panel indicator light | Indicates solar panel activity. |
| 2 | Charging indicator light | Indicates battery charging status. |
| 3 | Load indicator light | Indicates load output status. |
| 4 | Warning indicator light | Indicates system warnings or errors. |
| 5 | Return/load switch key (ESC) | Used to exit menus or switch load. |
| 6 | Flip Up/+ (UP) | Used to scroll up or increase values. |
| 7 | Down Page/- (DOWN) | Used to scroll down or decrease values. |
| 8 | Confirm/Set key (SET) | Used to confirm selections or enter settings. |
4.2 Device Information Browsing
Short press the UP and DOWN buttons to browse through various device information screens, including current curves for different days, device information, and more.
4.3 Quick Parameter Setting
From the main page, press and hold the SET button for 3 seconds to enter the quick settings menu. Here you can adjust parameters such as:
- Backlight mode (Keep On, Delayed Off)
- Load output Type (Light controlled switch, Always closed, Always open)
- Load opening time
- Time setting
- Clean generation
- Language (Chinese, English)
4.4 Advanced Settings
To access advanced system settings, press and hold both the ESC key and the SET key simultaneously for 5 seconds from the main page. You will be prompted to enter a password (default: 1111). Once inside, use the UP and DOWN keys to browse and adjust advanced parameters, including customized battery type settings and charging current settings.
4.5 Built-in WiFi Device and APP Monitoring
The controller includes a built-in WiFi device for remote monitoring via a mobile application. Both iOS and Android systems are supported.
WiFi Setup Steps:
- Download App: Search for "Smart Life" in your app store and download it.
- Register Account: Use your phone number or Apple ID to register for an account.
- Input WiFi Password: Turn on WiFi on your phone and allow the app to access permissions. Enter your WiFi password to connect the controller.
- View Historical Data: The app will record and display historical working data.
- Adjust Parameters: You can adjust charging parameters via the app and save your settings.

Figure 4.2: Step-by-step guide for connecting the controller to the Smart Life app via WiFi.
WiFi Status Indicator:
| Status | Indicator Behavior |
|---|---|
| WiFI module abnormality | WiFi icon flashes red slowly |
| WiFi not connected | WiFi icon flashes white slowly |
| Excellent WiFi signal | WiFi icon 3 bars blue |
| Good WiFi signal | WiFi icon 2 bars blue |
| Poor WiFi signal | WiFi icon 1 bar blue |
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MPPT solar charge controller.
- Cleanliness: Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Connection Checks: Periodically inspect all wiring connections (solar panel, battery, load) to ensure they are tight and free from corrosion. Loose connections can lead to overheating and reduced efficiency.
- Ventilation: Ensure the controller's ventilation openings are not obstructed to allow for proper airflow and cooling.
- Firmware Updates: Check the manufacturer's website or app for any available firmware updates to ensure your controller has the latest features and bug fixes.
- Battery Health: Monitor your battery's health and ensure it is within the recommended voltage ranges. The controller's display and app can provide this information.
6. Troubleshooting
The HXCONTROLLER MPPT Solar Charge Controller is equipped with various protection mechanisms. If you encounter issues, refer to the following common troubleshooting points:
- No Power/Display Off: Ensure the battery is connected correctly and has sufficient voltage. The controller requires adequate battery voltage to power on.
- No Charging: Check solar panel connections and ensure there is sufficient sunlight. Verify that the charging indicator light is active. Check for any warning indicators.
- Low Charging Current: If the charging current is lower than expected, check the solar panel input voltage and current. The controller automatically reduces charging power if the battery board power is too high or if the charging current exceeds the rated current.
- Overheating: Ensure the controller is installed in a well-ventilated area with adequate safety distances. The built-in fan cooling should activate if the temperature rises.
- WiFi Connection Issues: Ensure the controller is placed in an area with a strong 2.4GHz WiFi signal, ideally 5-10m from the router. 5GHz networks are not supported. Check the WiFi status indicator for clues.
- Parameter Settings Not Saving: Ensure you are correctly using the SET button to confirm changes after adjusting parameters.
- Warning Indicator Active: Refer to the display for specific error codes or messages if the warning indicator light is on.

Figure 6.1: Controller protection features including self-recovery, reverse connect, over-current, short-circuit, open-circuit, and high-temperature protection.
7. Specifications
The following table details the technical specifications for the HXCONTROLLER MPPT Solar Charge Controller HM Series:
| Feature | 60A Model | 100A Model | 120A Model |
|---|---|---|---|
| Maximum Photovoltaic Voltage | 480VDC (Solar Panel Open Circuit Voltage) | ||
| Charging Current | 0-60A adjustable | 0-100A adjustable | 0-120A adjustable |
| Battery Type (Sealed, Gel, Watering) | (24/36V/48V Automatic recognition + adjustable 24/36/48/60/72/84/96/108/120/132/144/156/168/180/192) | ||
| Battery Type (Lithium Iron Phosphate, Ternary Lithium) | 12V/24V/36V/48V/60V/72V84V/96V | ||
| Maximum Input Power of Solar Panel | 1440W/24V, 2880W/48V, 3600W/60V, 4320W/72V, 5760W/96V, 11520W/192V | 2400W/24V, 4800W/48V, 6000W/60V, 7200W/72V, 9600W/96V, 19200W/192V | 2880W/24V, 57600W/48V, 7200W/60V, 8640W/72V, 11520W/96V, 23040W/192V |
| Advanced Setting For Charging Voltage | 9-240V Adjustable | ||
| Charging Method | Power tracking, fast charging, floating charging | ||
| Start Charging | Photovoltaic voltage > battery voltage + 2V | ||
| DC Output Current | 40A | ||
| Operating Temperature | Max 65 degree (-20°C~65°C) | ||
| Cooling Method | Air Cooling, Fan | ||
| Altitude | 0-3000m | ||
| Product Size | 262x218x102mm | ||
| Gross Weight | 2.8kg | 5kg | 5kg |
For more detailed specifications, please refer to the official product documentation.
8. User Tips
- Initial Activation: When activating the controller for the first time, ensure the battery has sufficient voltage to prevent power-on issues due to low voltage.
- WiFi Signal Strength: For optimal app monitoring, install the controller in a location with a strong 2.4GHz WiFi signal, ideally 5-10 meters from your router. 5GHz networks are not currently supported.
- Battery Parameter Customization: If using a custom battery type (e.g., specific Lithium chemistries), utilize the advanced settings to program absorption voltage, floating voltage, low voltage disconnect, and load timer according to your battery manufacturer's recommendations.
- Monitoring Power Generation: Use the color multi-function display screen or the mobile app to view real-time and historical power generation data, including daily and total cumulative energy.
- Temperature Management: The intelligent fan cooling system helps manage device temperature. Ensure proper ventilation to support its effectiveness.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official HXCONTROLLER documentation or contact the seller directly.
A detailed user manual in PDF format is available for download. You can find it by searching for "HXCONTROLLER MPPT Solar Charge Controller User Manual PDF" online or by visiting the product page where you purchased the item.