1. Introduction
The TiESFONG i7pro-WB is a state-of-the-art 4-channel 4K dash cam designed to provide comprehensive surveillance and recording for your vehicle. Featuring a 4K front camera, three 1080P cameras for rear, left, and right views, and a 360-degree built-in radar parking monitor, this device ensures all-around protection. It integrates advanced technologies such as WDR/HDR, IR night vision, G-sensor, built-in WiFi, and GPS tracking to deliver stable performance, clear recording, and diversified functions for enhanced driving safety and evidence collection.

Figure 1: TiESFONG i7pro-WB 4CH Dash Cam
Video 1: TiESFONG i7pro-WB Product Overview
2. Setup and Installation
2.1 Package Contents
The standard package includes the i7pro-WB Host, S20 Rear Cam, GPS Cable, P7 Hardwire Kit, and a User Manual.

Figure 2: Package Contents (i7pro-WB Host, S20 Rear Cam, GPS Cable, P7 Hardwire Kit, User Manual)
2.2 Hidden Installation
The i7pro-WB dash cam is designed for easy and hidden installation. It requires only two power cables: the main power cable, which connects to your car's fuse box, and the rear camera cable. This design minimizes visible wiring, providing a clean and clutter-free interior. Excess cables can be neatly tucked into car gaps.

Figure 3: Easy and Hidden Installation

Figure 4: Discreet Dash Cam Placement
2.3 Memory Card Installation
The dash cam supports standard Micro SD cards. Please use memory cards with a capacity of 64GB (minimum) to 256GB (maximum) of Class 10, U3 (UHS-1) Speed or above. It is recommended to use Class 10, U3 LEXAR High Endurance Micro SD cards. Before first use, format the memory card directly on the Dash Cam via its menu options.
3. Operating Instructions
3.1 Powering On/Off
The dash cam is powered via a corded electric connection (TYPE-C input/output, 5V 2.5A). It will automatically power on and begin recording when the vehicle starts, and power off when the vehicle is turned off.
3.2 4-Channel Recording
The i7pro-WB simultaneously captures video from four channels: Front, Rear, Left, and Right. All four lenses are 150° wide-angle, providing 360° all-around protection and effectively reducing blind spots. The front camera records in 4K/2K (2160P/1440P), while the rear, left, and right cameras record in 1080P.

Figure 5: 4-Channel Recording Coverage

Figure 6: Multi-View Recording
3.3 Night Vision
The dash cam features superior night vision capabilities, combining WDR (Wide Dynamic Range) for the front camera and HDR for the rear camera. This technology automatically compensates for light/dark spots and balances exposure, ensuring clear footage in low-light or backlit situations. The left and right cameras are equipped with built-in high-sensitivity IR sensors and 4 IR LED lights for vivid recording in pitch-black environments.

Figure 7: Super Night Vision Features

Figure 8: WDR & HDR Night Vision

Figure 9: Infrared LED Light
3.4 Radar Parking Monitoring
The i7pro-WB features a built-in 360° radar sensor for parking monitoring. When the car is completely powered off, it enters radar parking monitor mode. The radar detects moving objects within 0-1.5m (front) and 0-1m (sides/rear) and immediately activates all four cameras to record. If no moving object is sensed, the recorder remains off, conserving power.

Figure 10: One-Click Control Parking Monitor

Figure 11: Built-in 360° Radar Parking Monitor
Video 2: Built-in Radar Sensor Demonstration
3.5 Loop Recording
The dash cam supports loop recording, which means it continuously records and overwrites the oldest files when the memory card is full. The i7pro-WB categorizes footage into dedicated 'Video' and 'Parking' folders, ensuring targeted overwriting based on recording modes and preserving critical events longer. It supports up to 256GB memory cards, extending recording time up to 26 hours.

Figure 12: Loop Recording Storage Capacity
3.6 G-Sensor
The advanced G-Sensor automatically detects collisions and locks the current video footage to prevent it from being overwritten. This ensures that critical evidence is secured for insurance claims or traffic disputes. You can also manually lock footage via an on-screen button.

Figure 13: G-Sensor Collision Detection

Figure 14: G-Sensor Auto-Lock
3.7 Built-in WiFi & GPS Tracking
The dash cam features built-in WiFi for connecting to your smartphone via the Viidure Free APP within a 3-meter range. This allows for live preview, instant playback, video downloads, event editing, and social sharing. The integrated GPS tracking system captures real-time location data (latitude, longitude), speed, and timestamp, which can be viewed during playback on the Viidure App or a computer for accurate trip logs.

Figure 15: Built-in WiFi and App Connectivity

Figure 16: Data Transfer Methods

Figure 17: GPS Tracking Information
Note: WiFi acts like a localized Bluetooth—it does not provide remote internet access or long-range connectivity. GPS Tracking does not support remote real-time monitoring.
4. Maintenance
4.1 General Care
- Keep the dash cam clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Ensure the lenses are free from dust and smudges for optimal video quality.
- Avoid exposing the device to extreme temperatures outside its operating range (-20°C to 65°C) for prolonged periods.
4.2 Memory Card Maintenance
Memory cards may become damaged or deteriorate after repeated cycles of overwriting, which can affect their ability to save video and image files. If this occurs, immediately replace it with a new memory card.
4.3 Low-Voltage Protection
The device features low-voltage protection with three settable gears: 11.8V, 12V, and 12.2V. If the car battery voltage drops below the set protection value, the dash cam will automatically disconnect to protect the battery. A smart tip light indicates battery voltage status (Green: higher than protection value; Red: lower than protection value).

Figure 18: Low-Voltage Protection
5. Troubleshooting
If you encounter any issues with your TiESFONG i7pro-WB dash cam, please refer to the following common solutions:
- Device not powering on: Ensure the power cable is securely connected to both the dash cam and the car's power source (fuse box). Check the car's fuse for any issues.
- Recording issues (e.g., files not saving, corrupted files): Verify that you are using a compatible Micro SD card (Class 10, U3, 64GB-256GB). Format the card through the dash cam's menu. If the issue persists, replace the memory card.
- Parking monitor not activating: Check the radar parking monitor settings. Ensure it is enabled and the sensitivity is set appropriately for your environment. Verify the low-voltage protection settings are not prematurely cutting power.
- WiFi connection problems: Ensure your smartphone is within 3 meters of the dash cam. Restart both the dash cam and your phone, then try reconnecting via the Viidure APP.
- GPS data not recording: Ensure the GPS cable is properly connected. Check the dash cam settings to confirm GPS logging is enabled.
For further assistance, please contact TiESFONG customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TiESFONG |
| Dash Cam Model | TiESFONG i7pro-WB |
| Item Type | Car DVR |
| Assembly Mode | Portable Recorder |
| Number Of Lenses | 4 |
| Camera Resolution | 2560x1440 (Front), 1920x1080 (Rear, Left, Right) |
| Pixels | 1200Mega |
| View Angle | 4*150° |
| Aperture | F1.6+F1.8 |
| Imaging Sensor | GC4653+GC2053 |
| Chipset Manufacturer | MSTAR |
| Frames Per Second | 25 |
| Video Code | H.265 |
| Video Format | TS, MP4 |
| Display Size | 3.16inch |
| Display Type | IPS |
| Screen Ratio | 16:9 |
| Built-in Screen | Yes |
| Touch Screen | No |
| Audio Recorded | Yes |
| Max External Memory | 256G |
| Memory Card Required Reading Speed | Class 10 |
| GPS logger | External |
| APP Compatibility | YES (Viidure) |
| Special Features | G-Sensor, motion detection, Radar Detector, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi function, Bluetooth, Parking Monitor, Speed and Coordinates Recording, 3D DNR, External GPS, NightShot Function, Rear Camera, Original Package |
| Power Source | Corded Electric |
| Input/Output | TYPE-C |
| Input | 5V 2.5A |
| Cable Length | 3M |
| Working Temperature | -20℃~65℃ |
| Weight | 183.4g |
| Battery Type | button cell (non-rechargeable) |
| Battery Capacity(mAh) | 1 mAh |
| OSD Language | Chinese (Simplified), Chinese (Traditional), English, French, German, Italian, Japanese, Korean, RUSSIA, Russian, Spanish |
| Certification | CE, FCC, RoHS |
7. User Tips
- For optimal video quality and reliable operation, always use a high-endurance Micro SD card (Class 10, U3 or above) from a reputable brand like LEXAR.
- Regularly format your memory card (monthly is recommended) through the dash cam's menu to prevent data corruption and ensure smooth recording.
- Adjust the radar parking monitor's sensitivity settings based on your parking environment to avoid unnecessary recordings in busy areas or missed events in quiet ones.
- Ensure the GPS cable is properly installed and connected to receive accurate location and speed data.
- Consider purchasing the optional YT25 CPL Optical Filter to reduce glare and reflections from the windshield, improving video clarity, especially in bright conditions.
8. Warranty and Support
TiESFONG is committed to providing high-quality products and excellent after-sales service. Our products adhere to global compliance standards, including CE, RoHS, and FCC certifications, and feature patented designs.
8.1 After-Sales Service
If you encounter any usage problems, please contact TiESFONG customer support. Our team aims to reply and provide solutions within 24 hours.
8.2 Product Authenticity
TiESFONG Official Store is the only authorized official store, ensuring you receive 100% original authentic products.