1. Introduction
The LHY Tiger Fish UIP (USB Purification Isolator) is a high-fidelity audio device designed to significantly improve the sound quality of your digital audio system. When computers and digital players are used as PCHIFI/CAS digital audio sources, the power supply and ground loop noise from the USB port, as well as high-frequency interference signals in the data stream, can have a noticeable negative impact on the entire audio system. This often manifests as background noise, current sounds, harsh audio, loss of detail, and reduced dynamics, leading to a degraded listening experience.
The UIP addresses these issues by providing complete isolation of the USB port's power and ground loop interference, purifying data signals, and regenerating DC power. It employs advanced technologies to ensure a clean, stable, and precise USB signal, resulting in a clearer, more transparent, and warmer audio output.

2. Key Features
- Advanced USB Isolation: Utilizes the ADuM4165 USB 2.0 high-speed isolation solution, providing up to 5700V isolation voltage. Completely isolates data interface ground loops and signal interference.
- High-Precision OCXO Clock System: Features an imported OCXO (Oven Controlled Crystal Oscillator) constant temperature crystal oscillator combined with a PLL (Phase-Locked Loop) circuit. This system offers extremely low phase noise, high stability, and significantly improves clock accuracy while reducing jitter.
- Pure Linear Power Supply: Employs multiple independent LT3042+PNP and LT3042 linear power supply paths, providing ultra-low noise (uV-level) power to the OCXO clock, isolation chip, and USB output. This completely isolates power interference from the PC.
- Signal Purification and Regeneration: Actively purifies USB data signals and regenerates DC power for a cleaner audio path.
- Robust Construction: Housed in a luxurious CNC-machined all-aluminum alloy chassis, designed to minimize mechanical resonance and interference.
- Plug and Play: Highly compatible with various operating systems (Mac OS, Windows, Android, iOS, Linux, Raspberry Pi) and requires no driver installation.
- External Clock Input: Supports connection of a higher-grade 10MHz external reference clock (50/75 Ohm adaptive) for further audio performance enhancement.
- Protection Features: Includes short circuit protection and anti-static surge protection.

3. Setup Guide
3.1 Package Contents
Please ensure all items are present:
- LHY Tiger Fish UIP Unit
- Standard Power Cable
3.2 Rear Panel Overview

- USB-Out: Connects to the USB input of your DAC (Digital-to-Analog Converter) or digital interface sound card.
- USB-In: Connects to the USB output of your audio source (e.g., computer, digital player, mobile phone, tablet).
- EXT 10MHz-In: BNC input for an external 10MHz reference clock.
- Power Switch: Turns the unit ON/OFF.
- Power Input: Standard IEC power inlet.
- Voltage Selector: Switch between 110V-120Vac and 220V-240Vac. Ensure this is set correctly for your region before connecting power.
- Fuse: Fuse holder for protection (5x20mm / 1.0AL).
3.3 Initial Connection
- Set Voltage: Verify the voltage selector on the rear panel is set to match your local mains voltage (110V-120V or 220V-240V).
- Connect Audio Source: Connect a USB cable from your audio source (e.g., computer, digital player) to the USB-In port on the UIP.
- Connect DAC/Audio Device: Connect a USB cable from the USB-Out port on the UIP to the USB input of your DAC or other audio processing device.
- Connect Power: Connect the provided power cable to the Power Input on the UIP and then to a suitable wall outlet.
- External Clock (Optional): If using an external 10MHz reference clock, connect it to the EXT 10MHz-In BNC port. The green LED next to the EXT port will illuminate if the external clock signal is successfully detected.

The UIP is designed for plug-and-play operation and does not require any special drivers for most operating systems.
4. Operating Instructions
4.1 Powering On/Off
After all connections are made, flip the Power Switch on the rear panel to the 'ON' position. The blue indicator light on the front panel will illuminate, indicating the unit is powered on.
4.2 OCXO Clock Preheating
The UIP features a high-precision OCXO constant temperature crystal oscillator. For optimal performance, it is recommended to allow the unit to preheat for approximately 15 minutes after powering on. This allows the OCXO to reach its stable operating temperature and deliver its full benefits in terms of clock accuracy and low jitter.

4.3 External Clock Usage
If you have a higher-grade 10MHz external reference clock, connect it to the EXT 10MHz-In BNC port. The UIP will automatically detect and synchronize with the external clock. A green LED next to the BNC port will confirm successful synchronization. Using a high-quality external clock can further enhance the UIP's audio performance.

4.4 General Operation
Once powered on and preheated, the UIP will transparently process the USB audio signal, isolating interference and providing a purified signal to your DAC. No further user interaction is typically required during playback.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the unit. Avoid using abrasive cleaners or solvents.
- Ventilation: Ensure the unit has adequate ventilation and is not placed in an enclosed space that could lead to overheating.
- Environmental Conditions: Keep the unit away from direct sunlight, heat sources, and moisture.
- Fuse Replacement: If the unit fails to power on, check the fuse. Replace it with a fuse of the same type and rating (5x20mm / 1.0AL).
6. Troubleshooting
- No Power:
- Check if the power cable is securely connected to both the UIP and the wall outlet.
- Ensure the power switch on the rear panel is in the 'ON' position.
- Verify the voltage selector is set correctly for your region.
- Check the fuse and replace if necessary (5x20mm / 1.0AL).
- No Audio Output:
- Ensure all USB cables are securely connected between the source, UIP, and DAC.
- Verify that your audio source is configured to output audio via USB.
- Check that your DAC is correctly selected as the audio output device on your computer/source.
- Confirm that the UIP is powered on (blue front LED illuminated).
- Poor Sound Quality / Still Hearing Noise:
- Ensure the UIP has been allowed to preheat for at least 15 minutes.
- Check all cable connections for looseness or damage.
- Try using different, high-quality USB cables.
- If using an external clock, ensure it is properly connected and functioning (green EXT LED illuminated).
- Ensure your audio source is not introducing excessive noise before the UIP.
7. Specifications

| Feature | Description |
|---|---|
| Technical Standard | 480Mbps (DSD512 bitrate is 45Mbps) |
| Voltage Regulator Circuit | 2-way LT3042+PNP and 2-way LT3042 |
| Core Clock | Imported OCXO constant temperature crystal oscillator + PLL circuit |
| Casing Type | Integrated aluminum alloy processing |
| Dimensions (WxDxH) | 150 x 175 x 50mm |
| Weight | 1.5 Kg |
| Voltage | Factory 220~240VAC (customizable 110~120VAC) |
| Power Consumption | 7W |
| Fuse Specification | 5x20mm / 1.0AL |
| USB Ports | 1x USB A-Out, 1x USB B-In |
| External Clock Input | 1x BNC-in (10MHz, Input impedance 50 Ohm/75 Ohm, 0dBm-20dBm, CMOS square wave 0.3V-3.3Vpp, sine wave 0.5-3.3Vrms) |
8. User Tips
- Cable Quality: While the UIP isolates interference, using high-quality USB cables for both input and output can further enhance overall system performance.
- Power Conditioning: Connecting the UIP to a clean power source or power conditioner can provide additional benefits, especially in environments with unstable mains power.
- Grounding: Ensure your entire audio system, including the UIP, is properly grounded to minimize potential ground loop issues.
- Experiment with External Clocks: If you have access to different external 10MHz reference clocks, experiment to find the one that yields the best sonic results for your specific setup.
9. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for any warranty-related requests.