SONGGER VMV1S-2

Contents

VMV1S-2 Smart Vacuum Gauge User Manual

Model: VMV1S-2 | Brand: SONGGER

1. Introduction

The SONGGER VMV1S-2 Bluetooth Smart Vacuum Gauge is a high-precision digital instrument designed for accurate vacuum measurement in various professional applications, including HVAC servicing, laboratory vacuum systems, and industrial leak detection. It features a reliable Pirani sensor for low-pressure measurement and offers Bluetooth connectivity via the HiVALUE App for real-time remote monitoring. The device also includes audible and visual alarms to provide immediate indication of vacuum leakage, enhancing efficiency and safety in professional environments.

VMV1S-2 Smart Vacuum Gauge showing its digital display with micron readings and time.
Figure 1: VMV1S-2 Smart Vacuum Gauge with display showing micron readings.

2. Safety Information and Precautions

Please read and understand all safety information before operating the VMV1S-2 Smart Vacuum Gauge to prevent injury or equipment damage.

2.1 General Precautions

  • Use the instrument only within the specified measuring range and operating temperature (0-45°C).
  • Do not exceed the maximum overpressure limit of 3.4 bar.
  • Avoid mechanical shock, strong vibration, and exposure to corrosive or flammable gases.
  • Recharge the battery using standard USB power sources only.

2.2 Warning Information (EU Market Reference)

WARNING!

  • This product is intended for low-pressure vacuum measurement applications only.
  • Do not connect the device to systems exceeding the rated overpressure. Improper installation or use on pressurized systems may result in injury or equipment damage.
  • Keep out of reach of children.
  • Dispose of the product in accordance with WEEE directives for electronic waste.

Note: The above warning information is for reference only. Final warning language must comply with the official language requirements of the destination EU country.

3. Specifications

The following table details the technical specifications of the VMV1S-2 Smart Vacuum Gauge:

ParameterSpecification
ModelVMV1S-2
Power SupplyBuilt-in 2000 mAh lithium rechargeable battery
Sensor TypePirani Sensor
Measuring Range0.1–3333.3 Pa
Resolution0.01 Pa (0.1–10 Pa), 0.1 Pa (10–3333 Pa)
Accuracy±25% (0.1–6.7 Pa)
Max Overpressure3.4 bar
Display UnitsPa, mBar, mmHg, microns
Bluetooth FunctionHiVALUE App for real-time data monitoring
Operating Temperature0–45°C
WeightApprox. 175 g
VMV1S-2 Smart Vacuum Gauge with accessories and key features listed.
Figure 2: VMV1S-2 Smart Vacuum Gauge and its key features.

4. Setup

4.1 Initial Preparation

  1. Charge the Battery: Before first use, ensure the built-in 2000 mAh lithium battery is adequately charged using the provided USB charging cable and a standard USB power source.
  2. Install HiVALUE App (Optional): If Bluetooth monitoring is required, install the HiVALUE App on your compatible mobile device (available for Android and iOS).

4.2 Connecting the Gauge

  1. Secure Connection: Connect the vacuum gauge securely to the vacuum system or refrigerant line you intend to measure. Ensure a tight seal to prevent leaks.
VMV1S-2 Smart Vacuum Gauge connected to a vacuum pump, illustrating its use in a system.
Figure 3: VMV1S-2 Smart Vacuum Gauge connected to a vacuum pump.

5. Operation

5.1 Basic Operation

  1. Power On: Press the power button to turn on the device.
  2. Select Units: Use the 'SET' button or arrow keys to select the required pressure unit (Pa, mBar, mmHg, or microns) on the display.
  3. Start Vacuum Process: Initiate the vacuum process in your system.
  4. Monitor Readings: Observe the vacuum level, timing data, and leakage status directly on the gauge's display or through the HiVALUE mobile application if connected via Bluetooth.

5.2 Leak Detection and Alarms

During operation, the VMV1S-2 is designed to alert you to potential vacuum leaks:

  • An audible alarm will sound.
  • The backlight of the display will flash.

These alerts activate when a vacuum leak is detected or when preset alarm conditions are reached, allowing for immediate response.

6. Maintenance

6.1 Storage

  • Store the device in a dry, clean, and well-ventilated environment when not in use.
  • For long-term storage, recharge the battery at least once every three months to maintain optimal battery performance and lifespan.

6.2 Cleaning

  • Clean the exterior of the device with a soft, dry cloth.
  • Do not use solvents or abrasive cleaners, as these can damage the casing or display.

7. Troubleshooting

ProblemPossible CauseSolution
Gauge not powering onLow or depleted batteryCharge the device using the USB charging cable.
Inaccurate or unstable readingsLoose connection to vacuum system; Sensor contamination; Operating outside specified temperature range.Ensure all connections are secure; Clean the sensor if accessible (refer to full manual); Operate within 0-45°C.
No Bluetooth connection to HiVALUE AppBluetooth disabled on mobile device; App not installed or updated; Gauge out of range.Enable Bluetooth on your mobile device; Install or update the HiVALUE App; Ensure gauge is within Bluetooth range.
Audible alarm/backlight flashing unexpectedlyVacuum leak detected; Preset alarm conditions met.Check the vacuum system for leaks and address them.

8. User Tips

  • For HVAC servicing, the VMV1S-2 provides precise and stable vacuum readings, making it a reliable tool for critical applications.
  • Regularly check for firmware updates for the gauge and the HiVALUE App to ensure optimal performance and access to new features.

9. Frequently Asked Questions (FAQ)

Q1: Can the VMV1S-2 be used without connecting to a vacuum pump?
A1: Yes, it functions as a standalone vacuum gauge for monitoring vacuum levels.
Q2: How does the device detect vacuum leakage?
A2: It emits a rapid beeping sound and activates a flashing backlight when a leak is detected.
Q3: Is the HiVALUE App compatible with both Android and iOS?
A3: Yes, the HiVALUE App is available for both Android and iOS devices.

10. Warranty and Support

For detailed warranty information, technical support, or further inquiries, please refer to the official product documentation or contact customer support.

A comprehensive user manual in PDF format is available for download: VMV1S-2 User Manual (PDF).

Contact Information for Technical Consultations:

Contact information including WhatsApp number and Email address for technical support.
Figure 4: Technical support contact details.
  • WhatsApp: +86 13311678550
  • Email: miazhao008@gmali.com
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.