Introduction
Thank you for choosing our 5-in-1 Technical Remote Control APP Programmable STEM Building Blocks Car Kit. This manual provides important safety information, usage instructions, maintenance guidelines, and customer support details. Please read this manual carefully before use and keep it for future reference.
This kit allows you to build and control five different urban engineering vehicle styles, fostering learning skills and enhancing creativity through hands-on construction and interactive control.
Safety & Warnings
WARNING
To reduce the risk of injury, fire, electric shock, or property damage, please read and follow all safety information and instructions before using this product.
- Recommended Age: This product is intended for users aged 16 years and above.
- Choking Hazard: Not suitable for children under 3 years due to small parts.
- Environmental Conditions: Keep away from fire, high temperatures, water, moisture, and corrosive environments.
- Unauthorized Modifications: Do not disassemble, modify, or repair the product without authorization.
- Intended Use: Use the product only for its intended purpose. Misuse may cause injury or damage.
- Malfunction: If the product (especially electronic parts) is damaged, overheated, emits smoke, unusual odor, or noise, stop using it immediately and contact customer support.
- Packaging: Keep packaging materials (plastic bags, foam, etc.) away from children to avoid suffocation risk.
- Usage Environment: For indoor use only unless otherwise specified on the product or packaging.
Product Overview
This STEM building block kit allows for the construction of 5 different urban engineering vehicle styles. It features dual control modes (remote control and APP control) and a strong power module for dynamic movement.
Key Features:
- 5-in-1 Design: Can be disassembled and transformed into five different engineering vehicle shapes.
- Dual Control Modes: Operate via a dedicated 2.4G remote controller or a smartphone APP.
- Multi-Joint Mobility: Models are capable of moving forward, backward, left, and right, with multiple movable joints.
- Strong Power Module: High-performance power module provides long-lasting operation.
- Multiple APP Modes: Includes remote control mode, gravity induction, path mode, and programming mode.
Assembly & Setup
The kit utilizes a subcontracting design to simplify the building process. Detailed step-by-step instructions are included in the box to guide you through assembling each of the five models.
Initial Preparation:
- Unpacking: Carefully remove all protective films and packaging materials from the components.
- Charging the Power Module: Connect the provided charging cable to the power module and a certified 5V power adapter. Ensure the module is fully charged before first use.
- Building: Follow the included instruction manual to assemble your desired engineering vehicle model.
Operation
Power On:
Press and hold the power button on the main power module for approximately 3 seconds to turn on the robot.
Control Modes:
The robot can be controlled using either the dedicated 2.4G remote controller or a smartphone application.
1. Remote Control Mode
Use the physical 2.4G remote controller for direct, multi-directional control. The remote features strong anti-interference capabilities for a stable connection.
2. APP Control Modes
Download the official control application to your smartphone. The app offers several interactive control modes:
- Remote Control Mode: Standard virtual joystick control within the app.
- Gravity Induction Mode: Open the app and swing your phone left and right to sense gravity and control the robot's movement.
- Path Mode: Draw your own route on the app screen, and the robot will follow the drawn path.
- Scratch Programming Mode: Utilize logical programming within the app to set custom instructions for the robot. This mode allows for creative and educational coding experiences.
Maintenance & Storage
Cleaning:
- Turn off the device before cleaning.
- Use a soft, lint-free cloth to wipe the surfaces.
- Do not use harsh chemicals or abrasive materials, as these can damage the product.
Storage:
- Store the product in a dry place at room temperature (15°C - 35°C).
- Keep away from direct sunlight and moisture to prevent damage.
- For long-term storage, if the product will not be used for an extended period, charge the power module to approximately 50% every 3 months to protect battery life.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not power on. | Low battery; Power button not held long enough. | Charge the power module fully. Press and hold the power button for 3 seconds. |
| Remote control or APP control not working. | Not paired; Out of range; Interference; App not connected. | Ensure the robot is powered on. Follow pairing instructions (if any). Move closer to the robot. Check for other wireless devices causing interference. Ensure Bluetooth is enabled on your phone and the app is connected. |
| Robot moves erratically or not as expected. | Loose connections; Incorrect assembly; Obstructions. | Check all building block connections. Review assembly steps in the manual. Ensure no parts are obstructing movement. |
| App is not responding. | App crash; Phone issues. | Close and restart the app. Restart your smartphone. Ensure the app is updated to the latest version. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact customer support.
Technical Specifications
| Feature | Detail |
|---|---|
| Product Name | 5-in-1 Technical Remote Control APP Programmable STEM Building Blocks Car Kit |
| Model | K76188 |
| Input Voltage | 5V 1A |
| Rated Power | 5W |
| Battery Type | Rechargeable Power Module (details not specified, but implied by charging instructions) |
| Material | Plastic (ABS), Electronic Components |
| Operating Temperature | -10°C ~ 40°C |
| Recommended Age | 16+ years |
| Block Size | Micro building block, Big building block (>1cm) |
| Certifications | CE, ROHS |
| Intended Use Environment | Indoor Use Only |
| Package Dimensions (approx.) | 25cm x 20cm x 7cm |
User Tips
- Organize Parts: Before starting assembly, sort the building blocks by type or color to make the process smoother and faster.
- Follow Instructions Carefully: Pay close attention to the step-by-step diagrams in the included manual to ensure correct assembly and functionality.
- Explore All Modes: Experiment with all the APP control modes (remote, gravity, path, programming) to fully experience the kit's capabilities and educational potential.
- Regular Charging: Keep the power module charged, especially if you plan for extended play sessions, to avoid interruptions.
- Creative Rebuilding: Don't hesitate to disassemble and rebuild different models to maximize the fun and learning from the 5-in-1 design.
Disposal & Recycling
This symbol ♻ indicates that this product should not be treated as household waste. According to the WEEE Directive (2012/19/EU), it must be disposed of at an appropriate electronic waste collection point for recycling to prevent potential negative consequences for the environment and human health.
Please recycle packaging materials responsibly. Recycle paper, cardboard, and plastic where facilities exist. Protect our environment. Thank you for your cooperation.
Compliance Information
This product complies with the essential requirements of the following EU Directives and Regulations (where applicable):
- General Product Safety Regulation (EU) 2023/988 (GPSR)
- Toy Safety Directive 2009/48/EC
- EMC Directive 2014/30/EU (for applicable products)
- ROHS Directive 2011/65/EU and (EU) 2015/863
- WEEE Directive 2012/19/EU
- REACH Regulation (EC) No 1907/2006
The CE marking indicates conformity with applicable EU Directives.
California Proposition 65 Warning
⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Customer Support
If you encounter any problems such as product damage, missing parts, or have questions regarding customization or bulk orders, please contact us through the following channels:
- Phone/WhatsApp: +86 18929344627
- Email: sales09@diymalls.com
We will reply to you as soon as possible.
Manufacturer: Shenzhen DIY Maker Co., Limited
3rd Floor, Building 81, Hekan Industrial Zone, No. 41 Wuhe South Road, Bantian, Longgang District, Shenzhen City, Guangdong Province, 518000 China
EU Responsible Person: Evatmaster Consulting GmbH
Bettinastr. 30, 60325 Frankfurt am Main, Germany