User Manual: Avatar 3 Tulkun Building Block Model

Introduction

This manual provides instructions for assembling and maintaining your Avatar 3 Tulkun building block model (Model 76115). This intricate model, inspired by the movie, consists of 1235 pieces designed for an engaging building experience. Please read all instructions carefully before beginning assembly.

Safety Information

• WARNING: This product contains small parts and is not suitable for children under 3 years old due to choking hazards.
• Recommended Age: 14+ years. Some sources also indicate 18+ years. Adult supervision is recommended for younger builders.
• Keep building blocks away from extreme heat or open flames.
• Do not ingest any parts of the model.

⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Your package should contain:

• 1235 building block pieces (Model 76115)
• Instruction manual (this document)
• Sticker sheet for detailed embellishments
• Display base components

Please verify all pieces are present before beginning assembly. If any parts are missing, contact customer support.

Setup and Assembly

Follow the step-by-step instructions provided in the included pictorial guide to assemble your Tulkun model. Organize your pieces by color and shape to facilitate the building process.

1. Unpack: Carefully remove all building blocks and the instruction manual from the packaging.
2. Sort Pieces: Sort the 1235 pieces by type and color. This will significantly speed up the assembly process.
3. Follow Instructions: Refer to the detailed pictorial instructions for each step of the assembly.
4. Apply Stickers: Once the main structure is complete, carefully apply the exquisite stickers to the designated areas as shown in the guide.
5. Assemble Display Base: Construct the display base according to its specific instructions.
6. Mount Model: Securely attach the completed Tulkun model to the assembled display base.

Operating Features

The Tulkun model features several movable parts for dynamic display and interaction:

• Movable Tail: The tail section of the Tulkun model is designed with articulation points, allowing for various poses. Gently adjust the tail segments to achieve desired movement.
• Movable Mouth: The mouth of the Tulkun can be opened and closed. Carefully manipulate the jaw section to demonstrate this feature.

Maintenance

To ensure the longevity and appearance of your Tulkun building block model:

• Cleaning: Dust the model regularly with a soft, dry cloth or a soft brush. For stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture.
• Storage: Store the model in a cool, dry place away from direct sunlight to prevent discoloration or warping of plastic parts.
• Handling: Handle the model gently, especially when adjusting movable parts, to prevent accidental detachment of pieces.

Troubleshooting

Problem: Pieces do not fit together.

Solution: Ensure you are using the correct pieces as indicated in the instruction manual. Some pieces may require a firm but gentle push to connect. Do not force pieces together, as this may cause damage.

Problem: Model is unstable on the display base.

Solution: Verify that the display base is correctly assembled and that the model is securely attached to the mounting points. Check for any loose connections in the base or the model itself.

Problem: Stickers are peeling off.

Solution: Ensure the surface was clean and dry before application. For re-application, gently peel off and re-press firmly. Avoid touching the adhesive side with fingers.

Specifications

User Tips

• Organize First: Before starting, lay out all pieces and sort them by color or type. This makes finding specific pieces much easier and reduces frustration.
• Follow Steps Carefully: Building block models often require precise placement. Double-check each step in the manual before attaching pieces.
• Use a Dedicated Workspace: A clean, flat, and well-lit surface will enhance your building experience and prevent losing small parts.

Warranty and Support

For any issues regarding missing parts, damaged components, or assembly difficulties, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

This product is certified with 3C and CE standards, indicating compliance with relevant safety and quality requirements.