HGLRC Nblade Pro 7-inch FPV Frame

Contents

HGLRC Nblade Pro 7-inch FPV Frame Instruction Manual

Model: Nblade Pro 7-inch FPV Frame

Ignite the sky by the light

1. Introduction

The HGLRC Nblade Pro 7-inch FPV Frame is a high-performance, dual-purpose frame designed for both freestyle and cinematic FPV applications. It features a streamlined, high-strength design, wear-resistant injection molded parts, and full side plate protection for internal electronics. The frame also includes an independent quick-release receiver compartment and a colorful RGB lighting effect system for enhanced visibility and customization.

HGLRC Nblade Pro FPV Frame, front view
Figure 1: HGLRC Nblade Pro FPV Frame, front view.

2. Product Features

  • Streamlined High-Strength Frame: Newly designed slender body combining aesthetics and sturdiness for a perfect balance of form and high strength.
  • Wear-Resistant Injection Molded Parts: Utilizes high-wear-resistant mold injection ABS/PP parts, significantly improving shock absorption, buffering performance, and overall durability compared to traditional FDM prints.
  • Fully Covered Side Plate Protection: Fuselage side plates are fully covered to protect internal electronic equipment from sand and debris intrusion.
  • Independent Quick-Release Receiver Compartment: A dedicated compartment for the receiver simplifies internal wiring, debugging, maintenance, and replacement.
  • Colorful RGB Lighting Effect System: Equipped with RGB LED light strips, supporting independent APP wireless control for customized lighting effects.

3. Specifications

Attribute Value
Model Nblade PRO
Material Carbon fiber + aluminum
Type 7-inch frame
Wheelbase 331.8mm
Dimensions 291mm × 321mm
Top plate thickness 2mm
Mid-plate/bottom plate thickness 3mm
Front/rear arms thickness 7mm
Top/bottom plate spacing 21mm
FC mounting holes 20x20 / 30×30 / φ3mm
Supported camera 19×19 / 20x20 / φ2mm
Motor mounting holes 19×19 / φ3mm / 4-hole
Weight 340g
Packaging and frame weight details for the HGLRC Nblade Pro FPV Frame
Figure 2: Packaging and frame weight details.

4. Package Contents

The HGLRC Nblade Pro 7-inch FPV Frame package includes the following components:

Exploded view of all components included with the HGLRC Nblade Pro FPV Frame, showing various plates, arms, screws, and accessories.
Figure 3: Exploded view of all included components.

Frame Components:

  • Bottom plate x1
  • Middle plate x1
  • Top plate x1
  • Front arm x2
  • Rear arm x2
  • Head aluminum part L x1
  • Head aluminum part R x1
  • GoPro reinforced carbon sheet x2
  • VTX heat dissipation aluminum part x1
  • Camera shock pad L x1
  • Camera shock pad R x1
  • GoPro mount x1
  • Foot pad A x2
  • Foot pad B x2
  • Antenna tail seat L x1
  • Antenna tail seat R x1
  • GPS mount x1
  • Receiver compartment x1
  • Antenna arm x1
  • Battery anti-slip sticker x1
  • Buzzer mount x1
  • Side plate L x1
  • Side plate R x1
  • Side sub-plate L x1
  • Side sub-plate R x1
  • Bottom light bar cover x1
  • Bottom front light cover x1
  • Head cover x1

Hardware & Accessories:

  • Semi-circular head M5*20 x1
  • Self-locking M5 nut x1
  • BLE adapter small board x1
  • Bottom light bar x1
  • 0.8mm piercing terminal wire 6P x1
  • 0.8mm piercing terminal wire 9P—3P*3 x1
  • XT60EW-M male head x1
  • PVC cable bundle 70mm x2
  • PVC cable bundle 100mm x2
  • HGLRC battery strap x1
  • M3*6 half round head x2
  • M3*18 half round head x4
  • M3*14 half round head x4
  • M3*32 half round head x4
  • M3*8 half round head x2
  • M3*10 half round head x4
  • M3*6 countersunk head x4
  • M2*4 countersunk head x3
  • M2*3 round head x2
  • M2*6 cup head x1
  • M2*16 cup head x1
  • M2*8 round head x2

Additional Items:

  • HGLRC 2023 large sticker x1
  • Universal QR code instruction manual x1 (for digital access)
  • HGLRC battery strap x2
  • Nblade PRO Frame packaging box x1

5. Setup and Installation

Follow these steps to assemble your HGLRC Nblade Pro FPV Frame. Refer to the detailed installation diagrams for visual guidance.

Detailed installation steps diagram for the HGLRC Nblade Pro FPV Frame, showing assembly of plates, arms, and other components.
Figure 4: Detailed assembly steps for the Nblade Pro frame.
  1. Prepare the Base: Begin by attaching the front and rear arms to the bottom plate using the appropriate screws (e.g., M3*18 half round head). Ensure they are securely fastened.
  2. Install Mid-Plate: Place the mid-plate onto the assembled bottom plate and arms. Secure it with screws, paying attention to the designated mounting holes for the flight controller (FC).
  3. Mount Electronics (FC/ESC Stack): Install your flight controller and ESC stack onto the FC mounting holes (20x20/30x30/φ3mm). Use standoffs as necessary to ensure proper spacing.
  4. Receiver Compartment: Assemble and install the independent quick-release receiver compartment. This is designed for easy access for frequency debugging and maintenance.
  5. Camera Installation: Mount your FPV camera (19x19/20x20/φ2mm compatible) using the camera shock pads and head aluminum parts.
  6. VTX and Antenna: Install your Video Transmitter (VTX) and secure the antenna using the antenna tail seats and antenna arm. The VTX heat dissipation aluminum part should be used for optimal cooling.
  7. GPS Module: If using a GPS module, attach it to the designated GPS mount.
  8. RGB Lighting System: Install the bottom light bar and bottom front light cover. Connect the RGB LED light strips to your flight controller or a dedicated power source, ensuring correct polarity.
  9. Top Plate and Head Cover: Secure the top plate and head cover to complete the main frame assembly.
  10. Motor Installation: Attach your motors to the motor mounting holes (19x19/φ3mm/4-hole) on the arms.
  11. Final Checks: Double-check all screws for tightness. Ensure all electronic components are properly connected and secured. Apply the battery anti-slip sticker to the battery mounting area.

6. Operating Principles

The HGLRC Nblade Pro frame serves as the structural foundation for your FPV drone. Its operation depends on the integrated electronic components (flight controller, ESCs, motors, camera, VTX, receiver, battery). Once assembled with these components, the drone is controlled via a remote transmitter. The RGB lighting system can be controlled wirelessly via a dedicated APP, allowing for custom lighting effects.

This frame is compatible with both analog and HD FPV camera systems (e.g., O3/O4). Ensure all electronic components are correctly wired and configured according to their respective manuals and the flight controller's firmware (e.g., Betaflight, ArduPilot).

7. Maintenance

  • Regular Inspection: Periodically inspect the frame for any signs of damage, cracks, or loose screws, especially after crashes or hard landings.
  • Cleanliness: Keep the frame clean from dirt, dust, and debris. Use a soft brush or compressed air to remove particles from crevices.
  • Screw Tightness: Ensure all screws are properly tightened. Over-tightening can strip threads or crack carbon fiber, while under-tightening can lead to vibrations or component loss.
  • Component Check: Verify that all electronic components (FC, ESCs, motors, camera, VTX, receiver) are securely mounted and their wiring is intact.
  • Arm Replacement: In case of severe damage to an arm, they can be replaced individually.

8. Troubleshooting

  • Excessive Vibration: Check for loose motor screws, bent propellers (not included with frame), or damaged frame arms. Ensure all frame components are tightly secured.
  • Unstable Flight: While primarily related to flight controller tuning and component issues, ensure the frame is assembled rigidly without any flex. Loose components can contribute to instability.
  • Damaged Parts: If any frame part is damaged, identify the specific component from the package contents list and replace it.
  • RGB Lights Not Working: Verify power connections to the RGB strips and ensure they are correctly configured in your flight controller's software or via the dedicated APP.

9. User Tips

  • Loctite for Screws: Consider using a small amount of blue threadlocker (Loctite 242) on metal-to-metal screw connections to prevent them from vibrating loose during flight. Avoid using it on plastic parts.
  • Cable Management: Utilize zip ties or electrical tape to neatly manage all wiring within the frame. This prevents wires from interfering with propellers or getting snagged.
  • Component Protection: While the frame offers good protection, consider adding extra foam or TPU prints for sensitive components like the camera or VTX, especially for aggressive freestyle flying.
  • Balance: When mounting your battery and other components, try to achieve a balanced center of gravity for optimal flight performance.

10. Warranty and Support

For warranty claims, technical support, or inquiries regarding replacement parts, please contact the seller or manufacturer directly. Retain your proof of purchase for any warranty-related services.

© 2023 HGLRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.