1. Introduction
Thank you for choosing the Langtu LT75 Pro 3-Mode Hot-Swappable Mechanical Keyboard. This keyboard is designed for both gaming and office use, featuring a smart color screen, customizable RGB lighting, a high-capacity 10000mAh battery, and versatile connectivity options. This manual will guide you through the setup, operation, and maintenance of your new keyboard.
Image 1.1: Langtu LT75 Pro Keyboard showcasing different color variants.
2. Key Features
- 3-Mode Connectivity: Wired (USB-C), 2.4G Wireless, and Bluetooth.
- Smart Color Screen: 1.14-inch HD TFT display for status, custom GIFs, and settings.
- Hot-Swappable Switches: Full key hot-swap design compatible with most 3/5-pin mechanical switches.
- High-Capacity Battery: Built-in 10000mAh battery for extended usage.
- Customizable RGB Lighting: 16 million colors with dynamic music rhythm effects.
- Gasket Structure: 7-layer sound-dampening internal fill for improved acoustics and typing feel.
- Dedicated Driver Software: For personalized function management, key customization, and GIF uploads.
- Ergonomic Design: Dual-section kickstand with 3-height adjustment.
Image 2.1: Visual overview of the keyboard's main features including smart screen, battery, hot-swap, RGB, and gasket structure.
3. Setup Guide
3.1. Connecting Your Keyboard
The LT75 Pro supports three connection modes: Wired, 2.4G Wireless, and Bluetooth. You can switch between these modes using the physical switch located on the keyboard or via the smart screen interface.
Image 3.1: Keyboard showing Type-C port, 2.4G dongle, and mode switch.
3.1.1. Wired Connection
- Locate the USB-C to USB-A cable provided.
- Plug the USB-C end into the keyboard's Type-C port.
- Plug the USB-A end into an available USB port on your computer.
- Ensure the keyboard is set to 'Wired' mode (usually indicated by a physical switch or on the smart screen).
- The keyboard will be automatically recognized by your system.
3.1.2. 2.4G Wireless Connection
- Locate the 2.4G USB receiver (dongle).
- Plug the 2.4G receiver into an available USB port on your computer.
- Switch the keyboard to '2.4G' mode. The smart screen will display the 2.4G icon.
- The keyboard should connect automatically. If not, press and hold the designated pairing key combination (refer to smart screen instructions or driver software for specific key combinations).
3.1.3. Bluetooth Connection
- Switch the keyboard to 'Bluetooth' mode. The smart screen will display the Bluetooth icon.
- On your device (computer, tablet, smartphone), go to Bluetooth settings and enable Bluetooth.
- The keyboard should appear as 'Langtu LT75 Pro' or similar in the list of available devices. Select it to pair.
- If prompted, enter the pairing code displayed on your device.
- The smart screen will indicate a successful connection.
3.2. System Compatibility
The Langtu LT75 Pro is compatible with a wide range of operating systems:
- Windows
- macOS
- iOS
- Android
You can switch between Windows and Mac layouts/modes via the smart screen or a dedicated key combination.
3.3. Driver Software Installation
For full customization and advanced features, it is recommended to install the official Langtu LT75 Pro driver software.
- Visit the official Langtu website (or the provided download link) to download the latest driver software for your operating system.
- Run the installer and follow the on-screen instructions.
- Once installed, launch the software to access features like key remapping, macro creation, RGB lighting customization, smart screen GIF uploads, and more.
Image 3.2: Screenshot of the Langtu LT75 Pro custom driver software interface.
4. Operating Instructions
4.1. Smart Color Screen Functions
The 1.14-inch HD TFT color screen provides real-time information and allows for quick adjustments:
- Mode Display: Clearly shows current connection mode (Wired, 2.4G, Bluetooth).
- Battery Status: Displays remaining battery life.
- System Switch: Allows switching between Windows and macOS compatibility modes.
- Custom GIFs: Upload and display personalized GIF animations via the driver software.
- Multimedia Information: Can display media playback status.
Image 4.1: Close-up of the smart color screen displaying custom animations.
4.2. Multimedia Function Knob
The metal knob located next to the smart screen offers multi-mode adjustment:
- System Switch: Rotate to cycle through system modes.
- Light Effects: Adjust RGB lighting patterns and brightness.
- Volume Control: Rotate to increase or decrease system volume. Press to mute/unmute.
- Sleep Mode: Activate or adjust sleep settings.
Image 4.2: Close-up of the multi-mode adjustment metal knob.
4.3. RGB Lighting Control
The keyboard features dynamic RGB lighting with 16 million colors and various effects, including music rhythm synchronization. Lighting can be controlled via the multimedia knob, dedicated function keys, or the driver software.
Image 4.3: Keyboard displaying cool colorful lighting effects.
4.4. Hot-Swapping Switches
The LT75 Pro features a full key hot-swappable design, allowing you to change switches without soldering. This is compatible with most 3-pin and 5-pin mechanical switches.
- Using the provided keycap puller, carefully remove the keycap from the switch you wish to replace.
- Using the provided switch puller, gently grip the top and bottom clips of the switch and pull it straight up.
- Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight.
- Press the new switch firmly into place until it clicks. Do not force it if there is resistance; check pin alignment.
- Replace the keycap.
Image 4.4: Illustration of the full key hot-swap feature.
4.5. Auto Sleep Technology
To conserve battery life, the keyboard is equipped with intelligent auto-sleep technology:
- Backlight Off: After 2 minutes of inactivity, the keyboard backlight will turn off.
- Deep Sleep: After 10 minutes of inactivity, the keyboard will enter a deep sleep mode.
- The keyboard will wake up immediately upon pressing any key.
Image 4.5: Diagram explaining auto sleep technology for longer battery life.
5. Maintenance
5.1. Cleaning Your Keyboard
Regular cleaning helps maintain the performance and appearance of your keyboard:
- Disconnect the keyboard from your computer before cleaning.
- Use a can of compressed air to blow away dust and debris from between the keycaps.
- For surface cleaning, gently wipe the keycaps and keyboard body with a soft, lint-free cloth lightly dampened with water or a mild electronics cleaner.
- Avoid using harsh chemicals, abrasive materials, or excessive moisture.
5.2. Keycap and Switch Maintenance
If you frequently swap keycaps or switches, ensure you handle them with care:
- Always use the provided keycap and switch pullers to avoid damaging the components.
- Store spare keycaps and switches in a clean, dry place.
- Inspect switch pins for bending before insertion; gently straighten with tweezers if necessary.
6. Troubleshooting
6.1. Keyboard Not Responding
- Wired: Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless: Ensure the 2.4G dongle is properly inserted and the keyboard is in 2.4G mode. Try re-pairing if necessary.
- Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Try re-pairing or removing and re-adding the device in your system's Bluetooth settings.
- Battery: Check the battery level on the smart screen. Connect the keyboard to a power source to charge.
6.2. RGB Lighting Issues
- Ensure the keyboard is powered on and not in sleep mode.
- Check lighting settings via the multimedia knob or driver software.
- If specific keys are not lighting up, ensure the switches are fully seated.
6.3. Driver Software Not Detecting Keyboard
- Ensure the keyboard is connected via wired mode when first setting up or troubleshooting driver issues.
- Restart your computer and the driver software.
- Reinstall the driver software.
- Check for any conflicting software or antivirus settings.
6.4. Battery Not Charging
- Ensure the USB-C cable is properly connected to a working USB port or charger.
- Try a different USB-C cable or power source.
- The smart screen should indicate charging status.
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | LT75Pro 3-Mode Color Screen Mechanical Keyboard |
| Keyboard Layout | 80-key |
| Keyboard Structure | Gasket Mount |
| Internal Fill | 7-Layer Structure (Latex Sound-Dampening Foam + PET Sound-Dampening Pad + 8x Expanded IXPE Switch Pad + PET Sound-Dampening Pad + LAT Housing Sound-Dampening Foam + PET Sound-Dampening Pad + Custom-Molded Silicone Feet) |
| Keycap Material | PBT (Original height, CSA Height options) |
| Keycap Process | Two-color injection molding, Gradient side-lit, White Contour Side-printed, 5-Side Sublimation + PC Transparent Keycaps |
| Screen | 1.14-inch HD TFT Color Screen |
| Lighting Effect | RGB, Lower Light Position |
| Backlight | 16 million + RGB colors |
| Battery Capacity | 10000mAh |
| Connection Method | Wired (USB-C), Wireless 2.4G, Bluetooth |
| Compatible Systems | Windows, macOS, iOS, Android |
| Hot Swap | Full Key Hot-swappable |
| Driver Software | Yes |
Image 7.1: Detailed parameter table for the Langtu LT75 Pro keyboard.
7.1. Switch Specifications (Examples)
- Cuiyin Switch: 5-pin linear, 3.3mm total travel, 38gf actuation force, 1.3mm actuation travel, 50gf triggering pressure.
- Macaron Switch: 5-pin linear, 3.3mm total travel, 40gf actuation force, 1.5mm conducting stroke, 50gf bottoming pressure.
- Radish Switch: 5-pin linear, 3.3mm total travel, 38gf actuation force, 1.8mm conduction stroke, 48gf bottoming pressure.
Image 7.2: Detailed specifications for various switch types available with the keyboard.
8. User Tips
- Maximize Smart Screen: Utilize the smart screen for quick checks of battery life, connection mode, and system compatibility. Upload custom GIFs to personalize your setup.
- Experiment with Connectivity: Switch between wired, 2.4G wireless, and Bluetooth modes based on your needs for gaming (wired/2.4G for lowest latency) or general use (Bluetooth for convenience).
- Customize Your Typing Feel: Take advantage of the hot-swappable design to try different mechanical switches that best suit your typing preference.
- Personalize with Driver Software: Install the driver software to unlock full customization options for key remapping, macros, and RGB lighting effects.
- Ergonomic Comfort: Adjust the dual-section kickstand to find the most comfortable typing angle for extended use.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Langtu website. Please have your product model and serial number ready when contacting support.