MLOVE E80 Portable Bluetooth Speaker

1. Introduction

Thank you for choosing the MLOVE E80 Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your device. Please read it thoroughly before use and keep it for future reference.

The MLOVE E80 delivers powerful 30W output, supports TWS wireless stereo pairing, and features vibrant RGB lighting. It is designed for both indoor and outdoor use with IPX7 waterproof and IP6X dustproof protection.

2. Safety Precautions

To ensure safe and proper operation, please observe the following:

• Always read and follow the instructions carefully.
• Store and use the product at room temperature.
• Avoid placing the product near heat sources such as radiators, heat registers, stoves, or other heat-producing apparatus (including amplifiers).
• Do not block the speaker's openings or insert objects into its vents/slots.
• Do not drop or throw the product to prevent damage.
• Charge the speaker using a power adapter with the product's rated voltage (DC 5V / 2A or above).
• If the connection cable is incompatible with your device, contact the dealer.
• Maintain a moderate volume level to prevent temporary or permanent hearing impairment.
• Any damaged equipment must be repaired by professional maintenance personnel. Unauthorized disassembly will void the warranty.
• Improper battery replacement poses an explosion risk. Replace only with the same type of battery.
• Do not disassemble, impact, squeeze, or throw the battery into fire. Discontinue use if severe swelling occurs.
• Do not expose the battery to high temperatures, direct sunlight, fire, or similar overheating conditions. Do not use after the battery has been immersed in water.
• If using a power adapter for charging, ensure it is CCC certified and meets standard requirements.

3. Package Contents

Please check that all items are present:

• MLOVE E80 Portable Bluetooth Speaker (1 pc)
• USB Type-C Charging Cable (1 pc)
• User Manual (1 pc)
• Lanyard (1 pc)

4. Speaker Layout and Button Functions

4.1. Buttons Guidance

4.2. Ports Functions

• USB Type-C Charging Port: Use a DC 5V / 2A or above USB adapter to charge the speaker.
• Micro SD Card Slot: Insert a Micro SD card (up to 32GB, not included) while the speaker is powered on. The speaker will automatically play music stored on the card.
• Aux-in Jack: Insert a 3.5mm audio cable while the speaker is powered on. The speaker will automatically enter Aux-in mode.
• Data Transmission (Micro SD Card Reader Mode): With the speaker powered off, insert a Micro SD card. Connect the speaker to a computer via the Type-C cable. Short press the Power button to enter card reader mode. You can then manage music files on the Micro SD card.
• USB-C Sound Card Mode: With the speaker powered off, connect the speaker to a computer via the Type-C cable. Short press the Power button to enter USB-C sound card mode.

5. Setup and Connection

5.1. Charging the Speaker

1. Connect the provided USB Type-C charging cable to the speaker's USB Type-C charging port.
2. Connect the other end of the cable to a DC 5V / 2A or higher USB power adapter (not included).
3. The Power Indicator light will turn red during charging.
4. The Power Indicator light will turn off once the speaker is fully charged (approximately 2 hours).

5.2. Power On/Off

1. To power on, press and hold the Power button for 2 seconds. You will hear a prompt sound, and the Bluetooth indicator will flash rapidly, indicating pairing mode.
2. To power off, press and hold the Power button for 2 seconds again.

5.3. Bluetooth Connection

1. Ensure the speaker is powered on and in pairing mode (Bluetooth indicator flashing rapidly).
2. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
3. Select "MLOVE E80" from the list of devices.
4. Once connected, you will hear a beep sound, and the Bluetooth indicator light will remain solid blue.
5. The speaker will automatically connect to the last paired device when powered on, if that device's Bluetooth is active.

5.4. True Wireless Stereo (TWS) Function

The TWS function allows you to pair two MLOVE E80 speakers for a wider, immersive stereo sound experience.

1. Set up the TWS System:
   • Turn on both MLOVE E80 speakers. Ensure no device is currently connected to either speaker via Bluetooth.
   • On one of the speakers, short press the "-" and "+" buttons simultaneously. You will hear a beep sound indicating that TWS pairing is in progress.
   • Once TWS pairing is complete, another beep sound will be heard.
2. Pair TWS Speakers with a Bluetooth Device:
   • On your Bluetooth device, enable Bluetooth and select "MLOVE E80" from the available devices.
   • A sound will indicate a successful connection, and the blue light on the main speaker will remain solid. The dependent speaker's blue light will also remain solid.
3. Stop the TWS Function:
   • To disconnect the TWS pairing, short press the "-" and "+" buttons simultaneously on either speaker.

TWS Tips:

• The speaker on which you first press the "-" and "+" buttons will become the master speaker (left channel), and the other will be the dependent speaker (right channel).
• TWS function supports only two speakers.
• After the initial TWS connection, the master/dependent relationship is remembered. The speakers will automatically connect in TWS mode when powered on together in the future.
• Once TWS is set up, you only need to operate one speaker; the other will synchronize automatically.

6. Operating the Speaker

6.1. Playback Modes

The MLOVE E80 supports multiple playback modes:

• Bluetooth Mode: Connect your device via Bluetooth as described in section 5.3.
• Micro SD Card Mode: Insert a Micro SD card with supported audio files (MP3, WMA, WAV, APE, FLAC) into the Micro SD slot while the speaker is powered on. The speaker will automatically begin playback.
• AUX-in Mode: Connect an audio source using a 3.5mm audio cable to the AUX-in jack while the speaker is powered on. The speaker will automatically switch to AUX mode.
• USB-C Sound Card Mode: With the speaker powered off, connect it to a computer using a USB-C cable. Short press the Power button to enter USB-C sound card mode, allowing the speaker to function as an external sound card for your computer.

To switch between these modes, short press the Mode Button (x1) on the speaker.

6.2. RGB Light Control

The MLOVE E80 features dynamic RGB lighting that moves with the rhythm of your music.

• To change the RGB light mode or turn the lights off/on, quickly double-click the Play Button (x2).

6.3. Bass Boost

Enhance your audio experience with the dedicated Bass Boost feature.

• To turn the Bass Boost on or off, short press the EQ Button (x1).

7. Maintenance

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use organic solvents or other chemicals.
• Storage: Store the speaker in a cool, dry place at room temperature when not in use for extended periods.
• Battery Care: To prolong battery life, avoid fully discharging the speaker frequently. Charge it regularly, even if not in use. Do not expose the battery to extreme temperatures.
• Water and Dust Protection: While the speaker is IPX7 waterproof and IP6X dustproof, ensure all port covers are securely closed before exposing it to water or dusty environments.

8. Troubleshooting

If you encounter issues with your MLOVE E80 speaker, try the following solutions:

• Speaker won't turn on: Ensure the battery is charged. Connect the speaker to a power source and try again.
• Cannot pair via Bluetooth:
  • Ensure the speaker is in pairing mode (Bluetooth indicator flashing rapidly).
  • Turn off and on your device's Bluetooth.
  • Forget "MLOVE E80" from your device's Bluetooth list and try pairing again.
  • Ensure the speaker is not connected to another device.
• No sound or low volume:
  • Adjust the volume on both the speaker and your connected device.
  • Ensure the speaker is properly connected to your device.
  • Check the audio source (e.g., Micro SD card, AUX cable).
• TWS pairing issues:
  • Ensure both speakers are MLOVE E80 models and no other devices are connected to them.
  • Repeat the TWS setup process carefully (Section 5.4).
• Speaker unresponsive / frozen: Reset the speaker by pressing and holding the Power button for 8 seconds.

9. Specifications

10. User Tips

• Maximize Battery Life: For optimal battery longevity, avoid completely draining the speaker's battery. Charge it when the battery level is low.
• Outdoor Use: Always ensure the port covers are tightly sealed when using the speaker near water or in dusty environments to maintain its IPX7 waterproof and IP6X dustproof ratings.
• TWS Placement: When using TWS, experiment with the placement of the two speakers to find the best stereo separation and soundstage for your listening environment.
• RGB Lighting: Utilize the dynamic RGB lighting to enhance the atmosphere for parties or outdoor gatherings. Double-click the Play button to cycle through light modes or turn them off.
• Sound Customization: Don't forget to use the EQ button to toggle the Bass Boost feature, tailoring the sound profile to your preference or music genre.

11. Warranty and Support

The MLOVE E80 Portable Bluetooth Speaker comes with a manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions.

For technical support, warranty claims, or any inquiries, please contact the manufacturer directly:

• Manufacturer: Shenzhen See Me Here Electronic Co., Ltd.
• Email: mlove@hscke.com
• Website: www.mlovelife.net

For a digital copy of this user manual, you can refer to the PDF document available at: MLOVE E80 User Manual (PDF)