TODIMART S3 Electric Scooter User Manual

1. Safety Information

Before operating your TODIMART S3 Electric Scooter, please read this manual carefully and understand all safety warnings and instructions. Failure to follow the instructions and safety warnings may result in serious injury or death.

• Always wear appropriate protective equipment, including a helmet, knee pads, and elbow pads, when riding.
• Ensure you comply with all local laws and regulations regarding electric scooter usage.
• Be aware of your surroundings and ride defensively. Avoid riding in heavy traffic, at night, or in poor weather conditions.
• Do not exceed the maximum load capacity of 120 kg (265 lbs).
• Keep fingers and other body parts away from moving parts, such as wheels and folding mechanisms.
• Fire Risk Warning: Please strictly follow the instruction manual for charging and storage to prevent potential fire risks.

2. Product Overview

The TODIMART S3 is a foldable electric scooter designed for urban and rural commuting. It features a powerful motor, long-range battery, and smart connectivity.

Figure 2.1: TODIMART S3 Electric Scooter with its companion app.

Key Features:

• 350W Brushless Motor
• 36V 7.8Ah (280.8Wh) Lithium-ion Battery
• 8.5-inch Tires
• Foldable Design for easy portability
• Bluetooth Connectivity for app control and real-time diagnostics
• LED Headlights and Taillights
• Front and Rear Braking System
• 3 Speed Modes (10 km/h, 20 km/h, 25 km/h)
• Anti-theft Functionality

3. Setup

3.1 Unfolding the Scooter

1. Place the scooter on a flat surface.
2. Release the folding mechanism latch, usually located near the base of the handlebar stem.
3. Carefully lift the handlebar stem until it locks into the upright position. Ensure the latch is securely engaged.
4. Adjust the handlebar height if applicable and tighten any quick-release clamps.

Figure 3.1: The intuitive folding mechanism allows for quick setup and storage.

3.2 Initial Charging

Before first use, fully charge the scooter's battery. Connect the charger to the charging port on the scooter and then to a power outlet. The charging indicator on the charger will typically change color (e.g., red to green) when fully charged. Charging time is approximately 4-6 hours.

3.3 Connecting to the App (Bluetooth Control)

1. Download the official TODIMART app from your smartphone's app store.
2. Ensure Bluetooth is enabled on your smartphone.
3. Power on the scooter.
4. Open the app and follow the on-screen instructions to pair with your S3 scooter.
5. The app allows for remote locking, real-time diagnostics, and speed mode selection.

Figure 3.2: Bluetooth control via smartphone app and integrated LED display.

4. Operating Instructions

4.1 Powering On/Off

Press and hold the power button on the handlebar to turn the scooter on or off. The LED display will illuminate when the scooter is on.

4.2 Selecting Speed Modes

The S3 scooter offers 3 speed modes:

• E (Eco) Mode: Approximately 10 km/h (6 mph) - Ideal for beginners or conserving battery.
• D (Drive) Mode: Approximately 20 km/h (12 mph) - Standard riding mode.
• S (Sport) Mode: Approximately 25 km/h (15.5 mph) - For maximum speed and performance.

Switch between modes using the dedicated button on the handlebar or via the companion app.

Figure 4.1: Battery capacity and speed mode indicators.

4.3 Riding the Scooter

1. Place one foot firmly on the footboard and push off with the other foot to gain initial momentum.
2. Once moving, gently press the accelerator lever to engage the motor.
3. Place your other foot on the footboard. Maintain a balanced and comfortable riding posture.
4. To slow down or stop, release the accelerator and gently squeeze the brake levers.

Figure 4.2: Enjoying the ride with the S3 Electric Scooter.

4.4 Braking System

The scooter is equipped with both front and rear brakes for effective stopping power. Use both brakes simultaneously for optimal control and shorter stopping distances.

Figure 4.3: Front and Rear Braking System for enhanced safety.

4.5 Folding for Transport

To fold the scooter, ensure it is powered off. Release the handlebar stem latch and carefully fold the stem down until it clicks into place. This compact design makes it easy to carry and store.

Figure 4.4: The S3 scooter easily fits into a car trunk when folded.

5. Maintenance

5.1 Battery Care and Charging

• Always use the original charger provided with your scooter.
• Do not overcharge the battery; disconnect the charger once charging is complete.
• Avoid completely draining the battery. Charge it regularly, even if not in frequent use.
• Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.

5.2 Tire Maintenance

Regularly check tire pressure and for any signs of wear or damage. Proper tire inflation ensures optimal performance and safety.

Figure 5.1: Inspect tires regularly for wear and proper inflation.

5.3 Cleaning and Storage

• Clean the scooter with a damp cloth. Do not use high-pressure water jets or corrosive cleaning agents.
• Ensure the scooter is dry before storing or charging.
• When storing for extended periods, ensure the battery is charged to about 50-70% and recharge it every 1-2 months to maintain battery health.

6. Troubleshooting

If you encounter any issues with your TODIMART S3 Electric Scooter, please refer to the following common troubleshooting steps:

• Scooter not turning on: Ensure the battery is charged. Check all connections for looseness.
• Motor not engaging: Make sure the scooter has initial momentum before pressing the accelerator. Check for any error codes on the LED display or app.
• Bluetooth connectivity issues: Ensure Bluetooth is enabled on your device and the scooter is powered on. Try restarting both the scooter and your smartphone.
• Reduced range or speed: This could indicate a low battery charge, improper tire pressure, or riding in challenging conditions (e.g., uphill, strong headwinds).

For persistent issues, please contact customer support.

7. Specifications

8. Warranty and Support

8.1 Warranty Information

The TODIMART S3 Electric Scooter comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

8.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact TODIMART customer service. When contacting support, please have your model number (S3) and proof of purchase ready.

If you experience any logistics abnormalities with your parcel, please contact customer service immediately for assistance before initiating any disputes.

9. User Tips

• Wear Protective Gear: Always prioritize safety by wearing a helmet and other protective gear.
• Regular Checks: Periodically check tire pressure, brake functionality, and ensure all screws and fasteners are tight.
• App Features: Utilize the Bluetooth app for remote locking and real-time diagnostics to enhance your riding experience and security.
• Proper Storage: Store your scooter in a dry, temperate environment and follow battery charging guidelines to prolong its lifespan and prevent hazards.
• Local Regulations: Always be aware of and comply with local traffic laws and regulations for electric scooters.