KEBIDUMEI Q1A 4-in-1 Car AI Box User Manual

1. Introduction

The KEBIDUMEI Q1A Car AI Box is an intelligent conversion device designed to enable wireless interconnection between your mobile phone and your car's infotainment system. It converts wired CarPlay and Android Auto to wireless, and also supports wireless screen mirroring via AirPlay (for iOS devices) and MirrorLink (for Android devices). This device aims to enhance your in-car entertainment experience and promote safer driving by reducing the need to interact directly with your phone.

2. Safety Information

• ATTENTION: Not suitable for children under 36 months.
• WARNING: Keep the device and its cord out of reach of children under 3 years old.

3. Compatibility Requirements

Before using the KEBIDUMEI Q1A, please confirm that your vehicle meets the following conditions:

• Your car must have an original factory screen.
• Your car must be factory-equipped with wired CarPlay or wired Android Auto functionality.
• Mobile Device Requirements:
  • Apple iPhone 6 or later (iOS 10.0 or later) for Wireless CarPlay and AirPlay.
  • Android 11.0 or later for Wireless Android Auto and MirrorLink.
• Not Compatible With: BMW, Tesla, Chinese electric vehicles, or models with incompatible protocols.

How to Confirm Compatibility:

1. Method 1: Connect your iPhone or Android smartphone to your car using a USB data cable. Check if a CarPlay or Android Auto connection interface logo appears on your car's display.
2. Method 2: Check with your car manufacturer or consult the compatible lists provided by Apple and Android for supported car models.

Image: Car display demonstrating CarPlay and Android Auto interfaces.

4. Setup Instructions

Initial Connection (Plug and Play):

1. Insert the KEBIDUMEI Q1A Car AI Box into the USB data port (or Type-C data interface) of your vehicle's infotainment system.
2. The device will power on and begin reading data. Wait for a few seconds for the device to initialize.
3. Ensure your car's infotainment system has its Wi-Fi turned on.

Image: Diagram illustrating the plug-and-play USB connection of the device.

5. Operating Instructions

5.1. Wireless CarPlay (for iOS Devices)

1. After connecting the AI Box to your car's USB port, navigate to your car's infotainment system and ensure Wi-Fi is enabled.
2. On your iPhone, go to Settings > Bluetooth. Search for the Bluetooth device named "OKBox-BT_****", "smartBox-****", or "AIBox-BT_****".
3. Pair your iPhone with the device. Allow contact and favorites sync if prompted.
4. Finally, click "Use CarPlay" on your iPhone when prompted.
5. Wait a few seconds for the CarPlay interface to appear on your car's screen.

Image: Car display showing the CarPlay interface.

5.2. Wireless Android Auto (for Android Devices)

1. After connecting the AI Box to your car's USB port, navigate to your car's infotainment system and ensure Wi-Fi is enabled.
2. On your Android phone, go to Settings > Bluetooth. Search for the Bluetooth device named "OKBox-BT_****", "smartBox-****", or "AIBox-BT_****".
3. Pair your Android phone with the device. The device name may change to "Your Car MyLink" after successful linking.
4. Wait a few seconds for the Android Auto interface to appear on your car's screen.

Image: Car display showing the Android Auto interface.

5.3. Screen Mirroring (AirPlay / MirrorLink)

The device supports screen mirroring for both iOS (AirPlay) and Android (MirrorLink) devices. This allows you to display your phone's screen directly on your car's infotainment system.

Image: Demonstration of screen mirroring functionality, showing a mobile app displayed on the car screen.

5.4. Voice Assistant

The AI Box supports voice assistant smart wake-up, allowing you to use mobile navigation voice guidance and other voice commands through your car's factory-fitted hands-free systems.

Image: Illustration of the voice assistant feature, showing a microphone icon and example commands.

5.5. Synchronize Mobile Phone Music

Preserve your vehicle's original sound quality while supporting multiple music apps for listening to your desired audio content.

Image: Illustration of music synchronization, showing a car display playing music from a mobile phone.

6. Product Specifications

Image: Diagram showing the physical dimensions of the KEBIDUMEI Q1A Car AI Box.

7. Firmware Update

How to Update the Product:

1. Connect the AI Box to a dedicated USB 5V power supply (e.g., a phone charger or car charger USB port) for the upgrade. Do NOT use the car's original USB port for upgrading, as this may cause the upgrade to fail.
2. On your phone, join the Wi-Fi network created by the device, typically named "OKBox-BT_****", "smartBox-****", or "AIBox-BT_****". The default password is 88888888.
3. Open a web browser on your phone and enter the IP Address 192.168.1.101.
4. On the online updates page, click the "upgrade" button.
5. Wait a few minutes for the upgrade process to complete.

Note: Please forget the Wi-Fi network from your phone after successfully upgrading to ensure proper functionality.

Image: Illustration showing the correct method (using a dedicated 5V USB power supply) and incorrect method (using the car's original USB port) for firmware updates.

8. Troubleshooting & FAQ

Q1: Do I have to sync the wireless AI Box adapter every time when starting my car?

A1: Don't worry. After the first successful adaptation, the wireless CarPlay or Android Auto adapter will automatically match the Bluetooth and Wi-Fi of your iPhone or Android device every time you start your car.

Q2: How to upload log data when the adapter doesn't work for my car unit?

A2: If you encounter issues, please enter the IP address page (192.168.1.101) in your browser, fill in the car information in the problem description sheet, and press "Submit" to upload your log data for technical support.

User Tips:

• For optimal performance, ensure your phone's operating system (iOS or Android) is up to date.
• If experiencing connection issues, try restarting both your phone and the car's infotainment system.

9. Regulatory Information

9.1. FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

9.2. FCC Radiation Exposure Statement

The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

10. Manufacturer Information

Manufacturer:

Name: Shenzhen Meiteai E-commerce Co., Ltd
Address: Building A, Building 201A, No. 8-14 Jinyuan Road, He'ao Community, Yuanshan Street, Longgang District, Shenzhen
Email: qiujianqiang@youyuepin.cn
Telephone: 86-13714205204

European Authorised Representative:

Name: 86-13714205204
Address: CALLE RIO TORMES NUM, 1, PLANTA 1, DERECHA, OFICINA 3, Fu en labrada, Madrid, 28947 Spain
Email: successseryice2@hotmai.com
Telephone: successseryice2@hotmai.com