1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your METALFISH DH510 Low Profile CPU Cooler. Designed for compact systems, the DH510 offers efficient cooling for a wide range of Intel and AMD processors with a TDP of up to 160W. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.
2. Warnings & Safety Information
- Keep out of reach of children under 14 years of age.
- Hot surfaces: Do not touch immediately after operation or shutdown. Risk of burns.
- Moving parts: Keep fingers and other body parts away. Risk of injury.
2.1. Safe Operation
- Power must be disconnected during installation/maintenance. Never touch components while energized to prevent electric shock/short circuits.
- Do not touch the fan blades while the fan is running. If you hear unusual noises or experience stuttering, immediately disconnect the power and inspect the unit.
- Avoid use in damp, high-temperature, or flammable/explosive environments to prevent short circuits.
3. Package Contents
Verify that all items are present in your package:
- METALFISH DH510 CPU Cooler (with pre-installed 9cm fan)
- AMD Mounting Bracket
- Intel Mounting Bracket
- Mounting Screws and Accessories
- Thermal Grease (12.8W/m.K)
4. Specifications
| Feature | Detail |
|---|---|
| Model Number | DH510 |
| Cooler Type | Low Profile |
| Heatpipes | 6 x Φ6mm copper heat pipes |
| TDP (Thermal Design Power) | 160W |
| Fan Speed | 900 - 2800 RPM ±10% |
| Power Interface | 4-Pin PWM |
| Fan Life | 50,000 hours |
| Blade Quantity | 9 |
| Bearing Type | Fluid Bearing (Hydrostatic Bearing) |
| Air Volume | 12.59 - 38.9 CFM (MAX) |
| Air Pressure | 0.29 - 2.19 mm/H₂O |
| Noise Level | 18 - 28 dBA ±10% |
| Fan Dimensions | 92 x 92 x 15 mm |
| Cooler Dimensions (L*W*H) | 110 x 92 x 51 mm |
| Lighting Effect | No light |
| Thermal Grease Conductivity | 12.8 W/m.K |
| Supported CPU Sockets | Intel: LGA1851, LGA1700, LGA1200, LGA1150, LGA1151, LGA1155, LGA1156, LGA1356, LGA1366, LGA2011, LGA2066 (Note: Does not support LGA775 or LGA2011-3 platforms) AMD: Socket AM5, AM4, AM3, AM2, FM1, FM2 |
5. Installation Guide
5.1. Pre-Installation Checks
- Ensure your motherboard and CPU socket are compatible with the DH510 cooler (refer to Specifications).
- Turn off your computer and disconnect the power supply before beginning installation.
- Remove any existing CPU cooler and thoroughly clean the CPU surface of old thermal paste using isopropyl alcohol.
- Identify the correct mounting bracket for your CPU platform (Intel or AMD).
5.2. Applying Thermal Paste
Apply a small amount of thermal grease (included or a higher quality alternative) to the center of the CPU's integrated heat spreader (IHS). The pressure from the cooler will spread it evenly. Avoid applying too much.
5.3. Mounting the Cooler
- Attach the appropriate mounting bracket to your motherboard around the CPU socket using the provided screws.
- Carefully place the DH510 cooler onto the CPU, aligning the mounting holes on the cooler with the bracket.
- Secure the cooler to the mounting bracket using the provided screws. Tighten screws in a diagonal pattern gradually until snug, ensuring even pressure. Do not overtighten.
- Connect the cooler's 4-pin PWM fan cable to the CPU_FAN header on your motherboard.
6. Operation
Once installed, the METALFISH DH510 CPU Cooler operates automatically. The 4-pin PWM connection allows your motherboard to control the fan speed based on CPU temperature, ensuring optimal cooling performance while minimizing noise.
- Fan Speed: The fan speed will dynamically adjust between 900 and 2800 RPM depending on the CPU load and temperature.
- Noise Level: The cooler is designed for quiet operation, with noise levels ranging from 18 to 28 dBA.
- Airflow: The fan directs hot air upwards, away from the CPU, and helps draw airflow through surrounding components in mini ITX cases.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your CPU cooler.
- Dust Removal: Periodically clean the fan blades and heatsink fins to prevent dust buildup, which can impede airflow and cooling efficiency. Use compressed air or a soft brush.
- Thermal Paste: If you notice a significant increase in CPU temperatures over time, consider reapplying thermal paste. This typically involves removing the cooler, cleaning old paste, and applying new paste.
- Fan Inspection: Check the fan for any signs of wear or damage. Ensure it spins freely without obstruction.
8. Troubleshooting
8.1. High CPU Temperatures
- Ensure the cooler is securely mounted and making proper contact with the CPU. Uneven pressure can lead to poor heat transfer.
- Verify that thermal paste was applied correctly and is not dried out. Reapply if necessary.
- Check for dust buildup on the heatsink fins and fan blades. Clean thoroughly.
- Confirm the fan is spinning. Check the 4-pin PWM connection to the motherboard.
- Ensure adequate airflow within your PC case.
8.2. Excessive Fan Noise
- Check for any cables or obstructions touching the fan blades.
- Ensure the fan is securely attached to the heatsink.
- If the noise is a consistent hum, it might be normal operating noise, especially under heavy load. The noise level is typically between 18-28 dBA.
- Verify fan settings in your motherboard's BIOS/UEFI.
9. User Tips
- For optimal thermal performance, consider using a higher quality thermal paste than the one included in the package.
- This cooler is well-suited for mini ITX cases and is confirmed to fit with various motherboards, including those with Xeon CPUs (e.g., X99 motherboards).
- The fan noise, while present, is generally comparable to common console noise levels (e.g., PS4 Pro) and is not considered excessive by many users.
- The DH510 is compatible with a range of Xeon processors, specifically E5/X79/X99, LGA2011/LGA2066 platforms (excluding LGA2011-3).
10. Environmental Protection and Compliance
- This product complies with EU RoHS (2011/65/EU) and its amendments, ensuring it is free from restricted substances. Compliance reports are available upon request.
- This product complies with the LVD (2014/35/EU) and EMC (2014/30/EU) Directives. Do not modify the circuitry in a manner that compromises compliance.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the point of purchase. Keep your proof of purchase for any warranty claims.