IPEGA PG-9257

Contents

IPEGA Wireless Game Gun PG-9257 User Manual

Model: PG-9257

1. Product Overview

The IPEGA PG-9257 is a versatile wireless game gun controller designed to enhance your gaming experience across multiple platforms. It features a realistic gun-shaped design, motion control, vibration feedback, rapid-fire capabilities, and customizable RGB lighting.

Key Features:

  • Multi-Platform Compatibility: Works with PS4, PS3, Android, iOS mobile devices and tablets, Nintendo Switch, PC, and smart TV systems via Bluetooth.
  • Built-in Gyroscope: Enables precise motion-controlled aiming for an immersive experience.
  • Rapid-Fire Function: Configure buttons for quick, continuous shooting.
  • Realistic Reload Mechanism: Features a slide-to-eject reload mechanism, activated by a mappable M-key, simulating gun reloading in shooting games.
  • Ergonomic Design & Vibration: Comfortable handling with motor vibration feedback for dynamic gameplay.
  • RGB Lighting: 3D guide ring with colorful RGB lighting effects.

Package Contents:

  • Game Gun (PG-9257) x1
  • User Manual x1
  • Type-C Power Cable x1

Product Diagram:

Below is a visual representation of the PG-9257 controller. Familiarize yourself with the button layout for optimal use.

IPEGA PG-9257 Wireless Game Gun with phone attached in a gaming setup

IPEGA PG-9257 Wireless Game Gun with a smartphone mounted, showcasing its design and RGB lighting.

Button Layout Description:

  • SELECT / START: Standard game function buttons.
  • T/M button: Used for TURBO and MACRO functions.
  • Right 3D & downward R3: Right analog stick with push-down (R3) function.
  • Left 3D & Downward L3: Left analog stick with push-down (L3) function.
  • Slide mechanism: Located on the left handle, used to simulate reloading in shooting games.
  • M button: Programmable button, default mapped to X button for reload.
  • D-pad: Directional pad.
  • ABXY button: Action buttons (A, B, X, Y).
  • Gyro Switch: Toggles gyroscope functionality.
  • Indicators: LEDs for battery level and mode status.
  • HOME: Power on/off, wake, and reconnection button.
  • L1 / L2: Left shoulder and trigger buttons.
  • R1 / R2: Right shoulder and trigger buttons.
  • Light switch: Controls RGB lighting effects.
  • Reset Pinhole: For factory reset.
  • USB interface: Type-C port for charging and wired connection.

2. Setup and Connection

Ensure the controller is charged before initial use. Refer to the 'Controller Charging' section for details.

2.1 Gyroscope Calibration:

  1. Place the controller on a flat, stable surface.
  2. Ensure the controller is powered off.
  3. Press and hold the "+" and "HOME" buttons simultaneously for 3 seconds to initiate calibration.

2.2 Pairing Instructions (from Power-Off State):

Keep the product in a horizontal position, ensuring the HOME button is on the right-hand side. Reset buttons to default settings if needed.

Operation ModePairing Mode (Press for 2 seconds)IndicatorDevice Name to Connect
Android V3 Direct Play ModeA + HOMELED1 flashes rapidly, then solidPG-9257
Android Standard ModeX + HOMELED2 flashes rapidly, then solidPG-9257
iOS MFI ModeB + HOMELED4 flashes rapidly, then solidDUALSHOCK 4 Wireless Controller
PC Wireless ModeR1 + HOMELED1, LED2, LED3 flash rapidly, then solidXbox Wireless Controller
N·S Wireless ModeY + HOMELED2-LED3 flash rapidly, then one LED solidConnect via Switch 'Change Grip/Order' menu

2.3 Reconnection (if previously paired):

  • For Android and iOS modes, briefly press the HOME button. The corresponding LED will blink slowly and automatically reconnect.
  • For N·S Wireless Mode, if the controller was previously paired and the console is on, briefly press the HOME button. LED2-LED3 will blink slowly, and a randomly assigned LED will remain solid upon successful reconnection.

2.4 PC Wired Mode:

  1. Connect the controller to your PC using the provided Type-C USB cable. All LEDs (LED1-LED4) will flash rapidly.
  2. Upon successful connection, the controller enters Xinput wired mode, indicated by LED1 staying solid.
  3. To switch to Dinput mode, press and hold the HOME button for 3 seconds. LED2 will stay solid.
  4. You can toggle between Xinput and Dinput modes by pressing and holding the HOME button for 3 seconds. Xinput is the default mode.

2.5 P3/P4 Wireless Mode:

  1. Connect the controller to the P4/P3 console using the Type-C USB cable. LED1 and LED3 will flash rapidly.
  2. Press the HOME button to pair. After successful pairing, the LEDs will automatically assign and remain solid, enabling wireless operation.
  3. For reconnection, briefly press the HOME button. The indicator LEDs will blink and then stay solid.
  4. Touchpad Simulation (P4 mode): Press L3 + T/M to enter touchpad mode (right joystick emulates touchpad controls). Press L3 + T/M again to exit this mode.

3. Operating Instructions

3.1 TURBO/MACRO Function:

Note: Disable the motion control switch before configuring TURBO/MACRO functions. Re-enable it after setup if needed.

TURBO (Rapid Fire):

  • Supported Buttons: L1, L2, R1, R2, A, B, X, Y.
  • Operation:
    1. Assign Rapid Fire: Hold the target button and press T/M once.
    2. Activate Auto-Rapid Fire: Hold the same button and press T/M twice.
    3. Cancel Rapid Fire: Hold the button and press T/M three times.
  • Indicator: When a configured rapid-fire button is pressed, the corresponding mode indicator will blink.

MACRO (Programmable Sequence):

  • Recording:
    1. Hold T/M + M-programming key (pull the left slider fully downward) until all four LEDs blink, then release.
    2. Press the button(s) you wish to program.
    3. Press the M-programming key again (pull left slider fully downward). The LEDs will stop blinking, indicating recording is complete.
  • Clearing:
    1. Hold T/M + M-programming key until LEDs blink.
    2. Press the M-programming key again. The LEDs will stop blinking, and the macro will be cleared.
  • Note: The M-key is default mapped to the X button.

3.2 Vibration Function Settings:

  • The controller vibrates for 0.5 seconds upon successful connection.
  • Vibration intensity is adjustable (default: Weak).
  • Increase Intensity: Press T/M + Push Left 3D Stick Up.
  • Decrease Intensity: Press T/M + Push Left 3D Stick Down.
  • Intensity Levels: Off / Weak / Strong.
  • The motor vibrates for 1 second during adjustment to preview the selected level.

3.3 Button Vibration Function:

  • Enable Vibration: Press and hold an action button (A/B/X/Y/L1/L2/R1/R2), then press and hold L3 for 2 seconds until the controller vibrates as confirmation.
  • Disable Vibration: Press and hold the previously configured vibration button, then press and hold L3 for 2 seconds until the vibration stops.
  • Settings Persistence: Configurations are saved after power-off and do not require reset upon next startup.
  • Vibration Pattern: 1 second per trigger, with 0.5-second intervals.

3.4 Motion Control On/Off:

  • Toggle the dedicated switch to forcibly enable motion control. This function defaults to the right 3D joystick (joystick input takes priority during use).
  • Turning off the motion control switch does not affect native motion sensing in P4/P3/N·S games.
  • When the motion control switch is on, full gyro simulation for the right joystick is activated.
  • Press the T/M key once to temporarily disable motion control; it will automatically re-enable when the L2 trigger is pressed, enhancing precision aiming during scoped gameplay.
  • Note: If motion control is forcibly enabled, the controller cannot enter auto-sleep mode.

4. Power Management

4.1 Controller Charging:

  • Charging During Use: The mode indicator LED will pulse during charging and remain solid once fully charged.
  • Charging While Powered Off: LEDs 1-4 will pulse during charging, and all four LEDs will remain solid when fully charged.

4.2 Sleep / Wake / Power Off Functions:

  • The controller will automatically enter sleep mode and power off after 15 minutes of inactivity.
  • Press the HOME button to wake the controller and reconnect when needed.
  • While powered on, press and hold the HOME button for 5 seconds to turn off the controller; all LED indicators will turn off.
  • When the NS2 console is in sleep mode, it cannot be awakened by pressing any controller buttons.

5. Maintenance and Care

  • Do not store the product in damp or high-temperature environments.
  • Avoid striking, dropping, piercing, or attempting to disassemble the product to prevent unnecessary damage.
  • Clean the controller with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.

6. Troubleshooting

  • Connectivity Issues: If the controller fails to connect or operate with certain games, this may be due to force majeure factors such as official platform software updates or source code modifications. The company is not liable for such issues.
  • Gyroscope Malfunction: If the gyroscope is not functioning correctly, perform the Gyroscope Calibration as described in section 2.1.
  • Controller Unresponsive: If the controller becomes unresponsive, try pressing the Reset Pinhole with a thin object (e.g., a paperclip) to perform a factory reset.

7. Specifications

7.1 Technical Parameters:

ParameterValue
Operating Current (RGB off)Approx. 20mA
Operating Current (RGB on)Approx. 80mA
Standby Current<15μA
Charging CurrentApprox. 260mA
Charging Time3 hours
Battery Life15 hours
Battery Capacity500mAh/3.7V
Interface TypeBluetooth
CertificationCE

7.2 Compatible Platforms:

  • PC
  • Android
  • iOS
  • Nintendo Switch
  • Nintendo Switch 2
  • PS3
  • PS4

7.3 Product Dimensions & Weight:

  • Length: 30 cm
  • Width: 19 cm
  • Height: 18 cm
  • Weight: 0.824 kg

8. Warranty and Support

Unauthorized disassembly by non-professionals will void the product warranty. For further assistance or detailed information, please refer to the official product documentation. A PDF version of the user manual is available here.

9. User Tips

  • PC Connection Hint: When connecting to a PC, try holding the '-' button while pairing. This can help the system recognize the device as an Xbox controller, potentially improving compatibility with some games.
  • Reload Crank Function: The slide-to-eject reload mechanism (M-key) is typically mapped to the 'X' button (or 'Square' button on PlayStation layouts). This provides a tactile and immersive reloading action in compatible shooting games.
  • Gyro Activation: If the gyroscope is not automatically active, ensure the Gyro Switch is toggled on. For specific games, you might need to press the dedicated gyro button to activate motion controls.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.