ANYFAR Wireless CarPlay Android Auto Interface User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your ANYFAR Wireless CarPlay Android Auto Interface. This retrofit kit adds CarPlay and Android Auto functionality to your Mercedes-Benz vehicle, integrating seamlessly with your existing display and controls.

Key Features:

• CarPlay Video Interface special for Mercedes Benz NTG 4.5/4.7 System head units with 5.8“ or 7” screens.
• Built-in 2.4G and 5.8G WIFI for stable wireless connection and Bluetooth 5.0 Technology.
• Supports Wired/Wireless CarPlay and Android Auto for seamless integration of music, maps, and phone calls.
• Control via original steering wheel controls, central control knob, and voice commands ("Hey Siri...").
• GPS navigation with support for Google Maps, Waze, and Apple Maps, including live traffic information.
• Built-in DSP for fully adjustable Audio EQ and optimal audio quality.
• Two RCA inputs for aftermarket rear and front/right PAL/NTSC cameras.
• Supports HD 360 panoramic cameras, dynamic guidance lines, and Parking Distance Control (OEM parking style).
• Plug-and-play, non-destructive installation without cutting wires.
• Easy switching between CarPlay/Android Auto display and factory controls.

2. Compatibility

This interface is specifically designed for Mercedes-Benz vehicles equipped with the NTG 4.5/4.7 system. Please verify your car's system and model year using the information below. If you are unsure, please consult your car's manual or contact customer support with photos of your car's center console.

2.1. Applicable Car Models and Years

The following table lists compatible Mercedes-Benz models, their applicable years, and screen sizes:

2.2. Identifying Your NTG System Version

It is crucial to confirm your vehicle's NTG system version before installation. Refer to the images below to identify your original radio homescreen menu and physical unit type.

3. Installation Guide

The ANYFAR Wireless CarPlay Android Auto Interface is designed for plug-and-play installation, requiring no wire cutting. However, professional installation is recommended. Ensure the vehicle's power is off before beginning installation.

3.1. Main Module Wiring

Connect the provided harnesses to the ANYFAR module and your car's head unit. A detailed wiring diagram is available in the official user manual PDF: View PDF Manual (refer to section 3, "INSTALL MANUAL"). Ensure all connections are secure.

3.2. DIP Settings & Switch

After physical installation, configure the DIP switches on the module according to your car model and screen size. The dial should be set to "ON" for the selected settings. After changing DIP settings, reboot the decoder box for changes to take effect.

3.3. Rear View Camera Input (Optional)

If you are installing an aftermarket rear view camera, connect it to the module as shown in the diagram below. The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.

To enable the reversing rear view function and configure radar/trajectory settings:

1. Go to system settings: "Factory mode" > "Advanced mode".
2. Enter password "888888".
3. Navigate to "MCU setup" and uncheck the "AO" option.
4. Return to the previous level and click "Restart system".

If your aftermarket camera supports a reversing trajectory line, uncheck the A1 box in the MCU Setup to display it. For aftermarket radar, uncheck the A2 box. Refer to the official user manual PDF for visual guidance on these settings (section 6.2, "Radar and Trajectory"): View PDF Manual.

3.4. AUX Audio Output

If your car does not have Bluetooth audio functionality, you can use the AUX sound output:

1. Connect the AUX cable to your car.
2. Select "AUX" in the NTG system.
3. In the module's settings, go to "Settings" > "Factory Settings" > "Phone link Settings" > "Disable phonelink Audio (ON)".
4. Go back and save the setting. A system reboot is necessary for the changes to take effect.

For visual guidance on AUX audio output configuration, refer to the official user manual PDF (section 6.3, "AUX OUTPUT"): View PDF Manual.

4. Operation

4.1. Wireless Connection (CarPlay & Android Auto)

The system uses a wireless CarPlay and Android Auto solution that supports audio and video separation. Before establishing a wireless connection, pair your device via Bluetooth and ensure your vehicle's audio system is set to Bluetooth music mode for optimal performance.

The connection process involves your smartphone connecting to the upgrade kit via Bluetooth, and then establishing a Wi-Fi connection for data transfer. For a visual representation, refer to the official user manual PDF (section 5, "WIRELESS CONNECTION"): View PDF Manual.

Connection Steps:

1. Turn on your phone's Bluetooth and Wi-Fi.
2. On your phone, select the Bluetooth device named "CAR Audio XXXX" (where XXXX is a unique identifier).
3. Initiate pairing. If prompted, confirm the pairing code.
4. After successful Bluetooth pairing, a request window will pop up. Select "Use CarPlay" or follow the on-screen Android Auto connection process.

Screenshots illustrating the phone Bluetooth pairing process for CarPlay and Android Auto connection prompts are available in the official user manual PDF (sections 5.1 and 5.2, "Wireless CarPlay" and "Wireless Android Auto"): View PDF Manual.

Audio Source Check:

On your iPhone, verify that the sound source is set to the original car radio for proper audio output. For a visual guide, refer to the official user manual PDF (section 5.1, "Audio Source"): View PDF Manual.

4.2. Button Controls

The interface retains the functionality of your original car controls, including steering wheel buttons and the central control panel.

Steering Wheel Buttons:

Central Control Panel:

4.3. Intelligent Voice Control

The system supports intelligent voice control, allowing for hands-free operation and safer driving. Use "Hey Siri" for Apple CarPlay or Google Assistant for Android Auto to control various functions.

5. Maintenance

To ensure the longevity and optimal performance of your ANYFAR interface, follow these general maintenance guidelines:

• Keep the module and connections free from dust and moisture.
• Avoid exposing the unit to extreme temperatures.
• Ensure proper ventilation around the module if it is installed in an enclosed space.
• Regularly check for firmware updates (if available from the manufacturer) to improve performance and add new features.
• If cleaning is necessary, use a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

6. Troubleshooting

This section addresses common issues you might encounter with your ANYFAR Wireless CarPlay Android Auto Interface.

6.1. Box's Bluetooth Disconnects

Problem: The Bluetooth connection to the ANYFAR box disconnects.

Explanation: This is a normal phenomenon. The wireless CarPlay/Android Auto system first uses Bluetooth for device information confirmation. Once confirmed, a Wi-Fi connection is established for data transmission. To avoid interference, the Bluetooth connection will then disconnect.

6.2. Cannot Connect CarPlay/Android Auto, but Bluetooth is Paired

Problem: Your phone's Bluetooth is paired with the car, but CarPlay or Android Auto does not connect.

Solution:

1. Forget the device's Bluetooth connection on your phone.
2. Reset your phone's Wi-Fi settings. For iPhone, go to "Settings" > "General" > "Transfer or Reset [Device]" > "Reset" > "Reset Network Settings".
3. Attempt to reconnect following the wireless connection steps in Section 4.1.

6.3. Unstable Wireless CarPlay/Android Auto Connection

Problem: The wireless connection to CarPlay or Android Auto is unstable or frequently disconnects.

Solution:

1. Check Installation Location: Ensure the ANYFAR module is not blocked by metal components in your car, as this can impair Wi-Fi signal transmission.
2. Switch Wi-Fi Channel:
   • Enter the CarPlay/Android Auto box settings.
   • Navigate to "Factory Mode" > "Connectivity Settings" > "Hotspot Band".
   • Select Wi-Fi channels 1, 6, or 11, depending on the current region and local interference. Test each channel for stability.

7. Specifications

8. User Tips

No specific user tips were available from reviews or Q&A for this product. Always refer to the detailed instructions in this manual for optimal use.

9. Warranty and Support

Your ANYFAR Wireless CarPlay Android Auto Interface comes with a 365-day warranty, ensuring quality assurance. For any technical assistance, installation queries, or troubleshooting beyond this manual, please contact our dedicated support team. We offer 1-on-1 engineer services to provide professional assistance.

Please refer to your purchase documentation for specific contact details for warranty claims and technical support.