1. Product Overview
The Sayin DAB376BT is a versatile multi-purpose emergency radio designed for various situations, offering DAB+ and FM radio reception, a powerful 5000mAh power bank, Bluetooth speaker functionality, and essential emergency features like an SOS alarm and torch. It supports multiple charging methods to ensure readiness when you need it most.
Key Features:
- DAB+ and FM Radio: Enjoy crisp, clear digital audio with automatic station scanning and memory for up to 60 stations (30 DAB/30 FM).
- 5000mAh Power Bank: Recharge your mobile devices via the USB output, ensuring communication during emergencies.
- Multiple Power Sources: Charge the internal battery via Micro USB, hand crank, or solar panel. Also supports 3x AAA batteries (not included) for additional power.
- Emergency Lighting: Features a multi-mode torch and a foldable reading lamp with adjustable brightness.
- SOS Alarm: Activate a loud alarm and flashing light for emergency signaling.
- Bluetooth Speaker: Connect your mobile device wirelessly to play music.
- Durable & Water-Resistant: Made from strong ABS material with IPX4 waterproof rating.
2. Setup
2.1. Package Contents
- Main unit (DAB376BT Radio)
- USB-C Cable
- Hand Strap
- Instruction Manual (this document)
2.2. Location of Controls
Familiarize yourself with the buttons and ports on your radio:
- Flashlight switch
- Speaker
- MENU/INFO button
- SCAN/SELECT button
- VOL - button
- ◀ (TUNE-, PREVIOUS) button
- VOL + button
- ▶ (TUNE+, SKIP) button
- SOS button
- Display
- LED indicator
- π / MODE button
- Hand strap hook
- Reading light
- Flashlight
- Battery compartment
- Power generator (Hand Crank)
- Antenna
- Solar panel
- DC IN 5V jack (USB-C), DC OUT 1A jack (USB), 3.5mm headphone jack
2.3. Charging the Built-in Rechargeable Battery
The internal LI-ION battery can be charged in three ways:
2.3.1. Charge via USB Socket
- Connect the supplied USB-C cable to the DC IN 5V USB Type-C socket on the radio.
- Connect the other end of the cable to a 5V USB adapter (not supplied).
- Note: A full charge takes approximately 6-8 hours.
2.3.2. Charge via Hand Crank (Power Generator)
- In an emergency, you can charge the built-in battery by rotating the hand crank.
- Pull out the POWER GENERATOR (hand crank) and rotate it quickly.
- The generated power is stored in the built-in battery.
- The INPUT LED indicator (RED) will light up during charging.
- Rotate the hand crank for 5 minutes to activate the built-in battery for initial use.
2.3.3. Charge via Solar Panel
- The solar panel is primarily used to maintain the battery life, as it is difficult to fully charge the radio using solar power alone.
- Place the solar panel directly under sunlight.
2.3.4. AAA Battery Compartment
- The radio can also be powered by 3x AAA batteries (not included).
- To use AAA batteries, open the battery compartment and insert them, then set the POWER button to 'AAA'.
2.4. Power On/Off and Standby
- Pull the telescopic antenna all the way out for better reception.
- Press and hold the 'π/MODE' button until the device switches on.
- To switch to standby, press and hold the 'π/MODE' button until the time and date appear on the display.
- To switch on from standby, briefly press the 'π/MODE' button once.
- To switch off completely from standby, press and hold the 'π/MODE' button until the display goes dark.
Note: After approximately 15 minutes without signal reception, the device will automatically switch to standby mode.
3. Operating Instructions
3.1. Adjusting Volume
- Press the 'VOL +/-' buttons until the volume level appears on the display. The volume range is 0 to 32.
3.2. Setting the Language
- Press and hold the 'MENU/INFO' button to open the system menu.
- Select 'System' and confirm with 'SCAN/SELECT'.
- Use '◀▶' to navigate to 'Language' and confirm with 'SCAN/SELECT'.
- Use '◀▶' to select your desired language and confirm with 'SCAN/SELECT'.
Note: If no button is pressed for a few seconds, the display will revert to the previously selected mode. Unconfirmed settings are not saved. Briefly press 'MENU/INFO' to exit the menu.
3.3. Mode Selection (DAB, FM, Wireless)
- Briefly press the 'π/MODE' button repeatedly to switch between DAB, FM Radio, and Wireless (Bluetooth) modes.
3.4. DAB Radio Operation
- Switching to DAB mode will automatically retrieve the last selected station.
- Tuning: Briefly press '◀▶' to open the full list of stations. Use '◀▶' to select the desired station and confirm with 'SCAN/SELECT'.
- Scanning: You can find the complete list of stations under 'Station List' in the system menu. A full manual 'Scan' can also be initiated from here.
- Saving Stations (Preset Store):
- Tune to the desired station.
- Press and hold 'MENU/INFO', select 'System', confirm with 'SCAN/SELECT'.
- Use '◀▶' to select 'Preset Store', confirm with 'SCAN/SELECT'.
- Use '◀▶' to select the desired memory preset location (1-40), confirm with 'SCAN/SELECT'.
- "Preset (number) stored" will appear briefly.
- Recalling Saved Stations (Preset Recall):
- Press and hold 'MENU/INFO', select 'Preset Recall', confirm with 'SCAN/SELECT'.
- Use '◀▶' to select the desired station and confirm with 'SCAN/SELECT'.
3.5. FM Radio Operation
- Switching to FM mode will automatically retrieve the last selected station.
- Tuning: Briefly press '◀▶' to search for a station in 0.05 MHz steps. Press and hold '◀▶' to start an automatic station scan. The scan stops once the first receivable station is found.
- Scanning: In the system menu under 'Scan Setting', you can choose between 'All Stations' or 'Strong Stations'.
- Saving/Recalling Stations: The process is the same as for DAB mode.
3.6. Bluetooth (Wireless) Speaker Function
Connect your mobile device to play music through the radio.
3.6.1. Establishing a Connection
- Activate the Bluetooth function on your mobile device.
- Briefly press the 'π/MODE' button to select the 'Wireless' mode.
- The display will show "Disconnected" flashing while searching for a signal. The Bluetooth LED indicator will light up blue.
- Start a device scan on your mobile device.
- Select "DAB375" from your mobile device's list and connect as usual.
3.6.2. Playing Music
- Start playback on your mobile device first.
- You can also control playback directly from the radio:
- Press 'SCAN/SELECT' to start/pause playback.
- Press '◀' once or twice to return to the start of the track or skip to the previous track.
- Press '▶' to skip to the next track.
- Use 'VOL +/-' to adjust the volume.
3.6.3. Disconnecting the Device
- Only one device can be connected at a time. To connect another device, disconnect the current one first.
- Unpair the devices on your mobile device.
- Devices will also unpair if moved out of Bluetooth range (approx. 10 meters).
- If you switch off the radio, it will automatically reconnect to the last paired device when switched back on, provided it's within range and Bluetooth is active.
3.7. Flashlight and Reading Lamp
3.7.1. Turning on the Flashlight (3 Modes)
- During operation, briefly press the flashlight switch to select different light modes.
- In OFF mode, press and hold the flashlight switch to turn on the flashlight.
3.7.2. Turning on the Reading Lamp
- Flip up the solar panel to automatically turn on the reading light. Close the solar panel to turn it off.
3.8. SOS Alarm
- Press and hold the 'SOS' button on the front panel to activate the alarm sound.
- Briefly press the 'SOS' button repeatedly to select different alarm modes.
- A very loud alarm will sound, and the flashlight will flash.
3.9. Phone Charging (USB Output 5V)
This portable radio can serve as an emergency charger for your mobile phone. It is not intended as a normal power bank.
- Note: The emergency charging function is only available when the radio is in Standby or OFF mode.
- Open the USB rubber cover on the side.
- Plug your mobile phone charging cable (not supplied) into the USB OUT 5V socket, then connect it to your phone.
3.10. Using Headphones
Prolonged listening at high volume can cause hearing damage. Set the volume to a low level before playing music. You can increase it later if desired.
- Lower the volume.
- Use a 3.5mm jack plug to connect earphones or headphones to the headphone port.
- If necessary, increase the volume. This mutes playback via the speaker.
- Note: Earphones with in-line controls are not compatible with this radio.
4. Maintenance
4.1. Rechargeable Battery Information
- Playback time is approximately 6-8 hours at 50% volume, depending on environmental conditions and volume.
- To preserve the battery's full capacity, fully recharge it every 2-3 months, even if not in use.
- Charge the battery in an environment between 0°C and +40°C.
- The battery holds its charge best at room temperature. Lower temperatures shorten playback time.
- The battery needs to be charged if the 'flat' battery symbol appears on the display.
- Note: FM/DAB reception may be affected during battery recharge.
5. Troubleshooting
| Problem | Solution |
|---|---|
| Device not working |
|
| No sound |
|
| DAB: selected station has no signal |
|
| FM: audio signal is weak or poor in quality |
|
6. Specifications
| Attribute | Value |
|---|---|
| Brand Name | Sayin |
| Model Number | DAB376BT |
| Dimensions (WxHxD) | 153*47*77MM (approx. 6.02 x 1.85 x 3.03 inches) |
| Body Material | Plastic |
| AM FM SW Radio | FM: 87-108MHZ |
| Type | DAB, FM |
| Bluetooth | Yes |
| WIFI | No |
| Screen | Yes |
| Power Supply | Rechargeable Battery Pack |
| Battery Included | Yes |
| Function | Built-In Speaker, Flashlight, Clock, Built-in Amplifier |
| Origin | Mainland China |
| Certification | CE, RoHS, KC, pse, weee |
| Fit for | All European, Australia, NZ, Turkey |
7. Warranty and Support
For detailed information regarding warranty, returns, and customer support, please refer to the official user manual PDF available for download. You can access the PDF manual at: User Manual (PDF).
This product is manufactured by Sayin. For further assistance, please contact the seller or refer to the product page on AliExpress.
8. User Tips
- DAB+ Reception: DAB+ reception is generally much better than FM, even indoors without extending the antenna.
- Scanning DAB Channels: When scanning for DAB channels, it is recommended to turn off the backlight timeout in the system settings to ensure all channels are found without interruption.
- FM Antenna: For optimal FM reception, always extend the telescopic antenna fully.
- Sound Quality: While not a stereo device, the radio provides crisp and clear sound, which is crucial for an emergency radio.