1. Introduction
The Estardyn 1.3-inch OLED Module with EC11 Encoder is a compact and versatile display and input solution for various DIY electronics projects, including those based on Arduino. This module integrates a 1.3-inch OLED display, driven by the SH1116 chip, with an EC11 rotary encoder and two independent buttons (Confirm and Back) onto a single board. This integrated design offers a concise, aesthetically pleasing, and convenient solution for your projects, reducing wiring complexity and board space requirements.

Front view of the Estardyn 1.3-inch OLED module with an integrated EC11 rotary encoder and a separate pin header. The OLED displays three diamond shapes and some icons.
2. Specifications
2.1. Product Parameters
| Feature | Value |
|---|---|
| Model Number | 1.3 inch oeld |
| Type | OLED |
| Origin | Mainland China |
| Resolution | 128*64 |
| Display Mode | 128X64 |
| Driver Chip | SH1116 |
| Interface | I2C |
| Rotary Encoder | EC11 (Plum-blossom handle, 15mm length, 20 pulse positioning, switch on pin 5) |
| High-concerned chemical | None |
| is_customized | Yes |
2.2. Product Dimensions
The module features four M3-sized mounting holes for easy integration into your projects.
- Overall Length: Approximately 64.90 mm
- Main Board Width: Approximately 27.64 mm
- Encoder Handle Length: 15 mm

Detailed diagram showing the physical dimensions of the module, product parameters, introduction, and interface descriptions.
3. Setup and Connection
This section details the pin assignments and recommended circuit connections for integrating the Estardyn OLED module into your project.
3.1. Interface Description (Pinout)
The module provides a set of pins for power, I2C communication, and encoder/button inputs. Refer to the diagram below for pin locations and their functions:
- VCC: 3.3V to 5V Power Supply Positive
- GND: Ground
- SDA: I2C Data Interface for OLED Screen
- SCL: I2C Clock Interface for OLED Screen
- TRA, TRB: Phase A and Phase B of EC1 Rotary Encoder
- PSH: Push Button Interface of EC1 Rotary Encoder
- CON (KEY1): Confirm Button Interface
- BAK (KEY0): Back/Return Button Interface

Top-down view of the Estardyn 1.3-inch OLED module, clearly showing the OLED display, rotary encoder, and the labeled connection pins.

Back view of the Estardyn 1.3-inch OLED module, highlighting the pin labels for connection.
3.2. Circuit Connection Diagrams
For proper functionality, connect the module to your microcontroller (e.g., Arduino) according to the following schematic diagrams. Ensure correct voltage levels (3.3V to 5V) are supplied to VCC.

Detailed circuit diagrams for the EC11 rotary encoder, OLED display (SH1116), and the BAK (KEY0) and CON (KEY1) buttons, illustrating how to connect them to a microcontroller.
4. Operating Instructions
4.1. Rotary Encoder (EC11)
The EC11 rotary encoder provides rotational input and a push-button function:
- Rotation: Turning the encoder clockwise or counter-clockwise generates pulses on the TRA and TRB pins. These pulses can be read by your microcontroller to detect direction and amount of rotation, typically used for menu navigation or value adjustment.
- Push Button (PSH): Pressing down on the encoder knob activates the integrated push button, connected to the PSH pin. This is commonly used for selection or confirmation.
4.2. Dedicated Buttons (CON & BAK)
The module includes two additional tactile buttons:
- CON (KEY1): This button serves as a 'Confirm' or 'Select' input.
- BAK (KEY0): This button functions as a 'Back' or 'Cancel' input.
These buttons provide independent input channels for enhanced user interaction.
4.3. OLED Display
The 1.3-inch OLED display uses the I2C communication protocol. You will need a compatible library (e.g., Adafruit GFX Library and Adafruit SH110X Library for Arduino) to control the display. The display can show text, graphics, and simple animations, providing visual feedback for your project.
5. Maintenance
- Cleaning: Use a soft, dry cloth to gently clean the OLED screen and module surface. Avoid using liquids or abrasive materials.
- Storage: Store the module in a dry, anti-static environment, away from direct sunlight and extreme temperatures.
- Handling: Handle the module by its edges to avoid touching the display surface or sensitive electronic components.
- Power: Always ensure the correct voltage (3.3V-5V) is supplied. Incorrect voltage can damage the module.
6. Troubleshooting
- Display Not Lighting Up:
- Check power connections (VCC and GND).
- Verify I2C wiring (SDA and SCL) and ensure they are connected to the correct pins on your microcontroller.
- Confirm that the I2C address in your code matches the module's address (typically 0x3C or 0x3D).
- Ensure the correct display library (e.g., SH110X) is installed and initialized in your code.
- Encoder Not Responding:
- Check connections for TRA, TRB, and PSH pins.
- Ensure pull-up resistors are correctly configured in your circuit or enabled in your microcontroller's software if not already present on the module.
- Verify your code's interrupt or polling logic for reading encoder states.
- Buttons Not Working:
- Check connections for CON (KEY1) and BAK (KEY0) pins.
- Ensure pull-up resistors are correctly configured or enabled in software.
- Verify your code's input reading logic for the buttons.
- Garbled Display:
- Check I2C connections for loose wires or shorts.
- Ensure the correct display driver (SH1116) is selected in your library initialization.
- Verify power supply stability.
7. User Tips
No specific user tips were available from reviews or Q&A for this product. However, general tips for working with OLED modules and rotary encoders include:
- Software Libraries: Utilize well-established libraries for OLED displays (e.g., Adafruit GFX and SH110X libraries) and rotary encoders to simplify programming.
- I2C Scanner: If you're unsure of the I2C address, use an I2C scanner sketch to find the correct address for your module.
- Debouncing: Implement software debouncing for both the rotary encoder's push button and the dedicated buttons (CON, BAK) to prevent false readings.
- Power Supply: While the module supports 3.3V-5V, ensure your microcontroller's logic levels are compatible.
8. Warranty and Support
For any technical assistance or inquiries regarding this product, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims, if applicable. Specific warranty terms may vary by region and seller.