Introduction
The SmallRig 2087D Camera Cage is designed to provide enhanced protection and multiple accessory mounting points for your Sony Alpha 7 III or Alpha 7R III camera. This lightweight and durable aluminum alloy cage ensures full access to camera controls, ports, and the battery compartment, while offering versatile options for professional video and photography setups.
Package Contents
Please verify that all items are present in your package:
- 1 x SmallRig 2087D Camera Cage
Setup and Installation
Compatibility
This camera cage is compatible with:
- Sony Alpha 7 III
- Sony Alpha 7R III
Installing the Camera Cage
- **Preparation**: Before installation, please remove the split D-ring on both sides of your camera.
- **Step 1: Secure the Bottom Screw**: Lock the camera via a 1/4"-20 screw located at the bottom of the cage.
- **Step 2: Engage Locating Pin**: Lock the camera via a locating pin at the side of the cage.
- **Step 3: Fasten Side Screw**: Lock the camera via an M2.5 screw at the left side of the cage.
The cage features built-in all-around protective spacers to prevent scratching your camera during installation and use.
Battery Compartment Access
The cage is designed with a hinged arm at the battery door. This design fits the camera's curve and enhances the grip experience, allowing for easy battery access without removing the cage.
Operating Instructions
Mounting Accessories
The SmallRig 2087D cage offers multiple mounting points for various accessories:
- 1/4"-20 Threaded Holes: For attaching a wide range of accessories like magic arms, small monitors, or LED lights.
- ARRI 3/8"-16 Locating Holes: Designed for accessories with ARRI anti-twist pins, such as monitor mounts (e.g., SmallRig 2903B) or top handles (e.g., SmallRig 3765).
- Cold Shoe Mounts: Two cold shoe mounts are available on the top of the cage for microphones, LED lights, or other cold shoe compatible accessories.
- NATO Rail: Located on the side, the NATO rail allows for quick attachment and detachment of NATO-compatible accessories like side handles (e.g., SmallRig 3260).
- QD Socket: The bottom QD socket supports Quick Detach shoulder straps for easy carrying.
Quick Release Plate Functionality
The bottom of the cage features an Arca-Swiss quick-release plate, enabling fast transitions between different shooting setups:
- Tripod Shooting: Easily mount the camera with the cage onto Arca-Swiss compatible tripods.
- Stabilizer Shooting: Compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro stabilizers, including their quick release plates (riser plates), and the SmallRig Arca-Swiss quick release plate 3154.
- Handheld Shooting: Quickly detach from tripods or stabilizers for handheld operation.
Cable Management
Optional HDMI Cable Clamp 3637 / 1679 (not included) can be used to protect camera interfaces and ensure stable signal transmission during filming.
Maintenance
Cleaning
To maintain the longevity and appearance of your SmallRig 2087D cage:
- Wipe the cage with a soft, dry cloth after each use to remove dust and fingerprints.
- For stubborn dirt, use a slightly damp cloth and then dry thoroughly.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the aluminum alloy finish.
Tool Storage
The cage includes a built-in magnetic spanner for convenient disassembly and assembly. Ensure the spanner is securely stored in its designated slot when not in use to prevent loss.
Troubleshooting
Cage Not Fitting Correctly
- Check D-rings: Ensure that the camera's split D-rings have been removed prior to installation, as instructed in the setup section.
- Verify Camera Model: Confirm that your camera is a Sony Alpha 7 III or Alpha 7R III. This cage is specifically designed for these models.
- Battery Grip Interference: This cage model (2087D) is designed for cameras without a battery grip. If you are using a battery grip, the cage may not fit. Please consider a SmallRig cage model specifically designed for use with battery grips.
User Tips
- Accessory Planning: Before a shoot, plan out which accessories you'll need and utilize the various mounting points (1/4"-20, ARRI 3/8"-16, cold shoe, NATO rail) to optimize your setup.
- Quick Transitions: Take advantage of the Arca-Swiss quick release plate for rapid switching between tripod, handheld, and stabilizer shooting to save time on set.
- Cable Protection: For critical video work, consider adding an optional HDMI cable clamp to prevent accidental disconnections and port damage.
- Battery Grip Note: If you typically use a battery grip, be aware that this specific cage model (2087D) is not designed for compatibility with battery grips. Check for alternative SmallRig models if this is a requirement for your workflow.
Specifications
| Attribute | Value |
|---|---|
| ID | 2087D |
| Net Weight | 158.0 ± 5.0g |
| Product Dimensions | 145.5 x 106.0 x 58.1mm |
| Package Dimensions | 180.0 x 129.5 x 75.0mm |
| Package Weight | 235.0 ± 5.0g |
| Compatibility | For Sony Alpha 7 III / Alpha 7R III |
| Material(s) | Aluminum Alloy, Stainless Steel, Silicone |
Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact SmallRig customer service directly through their official website or the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.