BRS GR-119P

Contents

BRS GR-119P Electric Air Pump User Manual

Model: GR-119P

1. Introduction

The BRS GR-119P Electric Air Pump is a versatile, high-flow, wireless inflator designed for quick and efficient inflation and deflation of various items such as small air mattresses, kayaks, and other inflatables. Featuring a brushless motor, precise pressure control, and a compact, lightweight design, it offers convenience and powerful performance for both outdoor and home use.

GR-119P pump on a paddleboard with nozzles
The GR-119P Electric Air Pump on a paddleboard, ready for use.

2. Safety Information

WARNING

  • For adults only.
  • Do not drop equipment into water or expose it to rain or water.
  • Do not direct airflow to the face or body.
  • Do not operate for more than 5 minutes at a time. Allow to cool for at least 5 minutes between uses.
  • Do not block the vent.
  • Do not insert objects into the air inlet or outlet.
  • The product contains a battery. Do not let it touch any liquids, and keep away from fire sources and environments with high temperatures exceeding 50°C.
  • During use, if the power is too low and the pump enters protection mode, turn off the switch before charging.

FOLLOW THESE RULES AND ALL INSTRUCTIONS TO AVOID PROPERTY DAMAGE, ELECTRIC SHOCK, BURNS OR OTHER INJURY.

3. Package Contents

The GR-119P Electric Air Pump package includes the following items:

  • 1 x GR-119P Electric Air Pump
  • 1 x Instruction Manual (PDF available for download: User Manual PDF)
  • 1 x USB Charging Cable (Type-C)
  • 3 x Nozzles (various sizes for different inflatables)
GR-119P product and accessories
Contents of the GR-119P Electric Air Pump package.

4. Parts Identification

Familiarize yourself with the different parts of your GR-119P Electric Air Pump:

Diagram of GR-119P parts
Key components of the GR-119P Electric Air Pump.
  • Air Outlet: Used for inflation.
  • Power Button: Controls the pump's operation.
  • Air Inlet: Used for deflation (suction).
  • Charging Port: Type-C port for charging the internal battery.
  • Nozzles: Interchangeable nozzles for various valve types.
Close-up of GR-119P nozzles and ports
Detailed view of the air pump's nozzles and ports.

5. Specifications

FeatureSpecification
ModelGR-119P
Pressure≥2PSI (14000Pa Max.)
Flow Rate600L/min
Power120W
Battery Capacity2500mAh
Noise Level≤80dB
Input5V-1A/5V-2A MAX (Type-C)
Weight350g
Dimensions172 x 75.5 x 97.6mm
MaterialPlastic
ElectricYes
High-concerned chemicalNone
TypeInflator pump
OriginMainland China
Detailed specifications table for GR-119P
Detailed technical specifications of the GR-119P.
Brushless motor diagram
The GR-119P features a brushless motor for high performance and low noise.

6. Setup

Before operating your GR-119P Electric Air Pump, follow these setup steps:

  1. Select Nozzle: If necessary, choose the appropriate nozzle from the included set that matches the valve of your inflatable product.
  2. Attach Nozzle: Install the selected nozzle onto the inflation port (for inflation) or deflation port (for deflation) of the air pump.
  3. Secure Connection: Insert the air pump with the sleeved air nozzle into the valve of your inflatable and tighten it clockwise to ensure a secure connection. The exclusive buckle design ensures the nozzle will not fall off during use.
Diagram showing nozzle attachment
Rotate clockwise to connect the air nozzle to the air pump buckle.
Image of multiple air nozzles
The pump comes with multiple air nozzles to fit different products.

7. Operating Instructions

The GR-119P offers simple one-click operation for both inflation and deflation.

7.1. Inflation

  1. Ensure the correct nozzle is securely attached to the Air Outlet of the pump and inserted into the inflatable's valve.
  2. Press and hold the Power Button for 2 seconds to turn on the pump.
  3. The pump will begin inflating. Once the desired inflation is achieved, press the Power Button again to turn off the pump.
  4. Remove the air pump and close the valve cover of your inflatable by turning it clockwise.
Inflation demonstration with GR-119P
Inflation of an air mattress using the GR-119P.

7.2. Deflation (Suction)

  1. Ensure the correct nozzle is securely attached to the Air Inlet of the pump and inserted into the inflatable's valve.
  2. Press and hold the Power Button for 2 seconds to turn on the pump.
  3. The pump will begin deflating (sucking air out). Once the item is deflated, press the Power Button again to turn off the pump.
  4. Remove the air pump and close the valve cover of your inflatable.
Deflation demonstration with GR-119P
Deflation of an air mattress using the GR-119P for compact storage.

7.3. Operation Demonstration Video

This video demonstrates the inflation and deflation process for various items like fishing boats, canoes, and air mattresses.

8. Maintenance

The GR-119P Electric Air Pump is designed for low maintenance. Please observe the following guidelines:

  • No specific air pump maintenance is required. The air pump has no user-serviceable parts.
  • The batteries are permanently sealed in the pump and cannot be removed or replaced.
  • As the pump's performance weakens from use, recharge the batteries. Do not wait until they are fully discharged.
  • Do not dispose of the air pump and its batteries in fire. Check your local regulations for proper disposal instructions.
  • Keep the device away from heat or direct sunlight.
GR-119P with battery icon
The 2500mAh battery ensures care-free use, recharge when performance weakens.

9. Troubleshooting

If you encounter issues with your GR-119P Electric Air Pump, try the following:

  • Pump not turning on:
    • Ensure the battery is charged. Connect the pump to a Type-C charger. The red light is always on when charging.
    • Make sure you are pressing and holding the power button for at least 2 seconds to activate the pump.
  • Slow inflation/deflation:
    • Check that the correct nozzle is securely attached and properly inserted into the inflatable's valve.
    • Ensure the air inlet/outlet is not blocked by debris or your hand.
    • The battery might be low. Recharge the pump.
  • Pump stops unexpectedly:
    • The pump may have reached its 5-minute continuous operation limit. Allow it to cool down for at least 5 minutes before resuming use.
    • The battery might be critically low and the pump has entered protection mode. Turn off the switch and recharge.

10. User Tips

Maximize your experience with the GR-119P Electric Air Pump with these helpful tips:

  • Portability: Weighing only 350g and featuring a compact design, the GR-119P is ideal for travel. Always pack it for camping, hiking, and other outdoor adventures.
  • Battery Life: With a 2500mAh battery, the pump can be used 3-5 times after a full charge. Keep it charged for uninterrupted use.
  • Charging: The Type-C charging port allows for convenient charging with power banks, making it easy to power up on the go.
  • Versatility: The included multiple nozzles make it compatible with a wide range of inflatables, from air beds and sofas to kayaks and swimming rings.
  • Efficiency: The brushless motor provides huge airflow and low noise, ensuring quick and quiet inflation/deflation.
GR-119P pump in a bag
The lightweight (350g) and compact design makes the GR-119P highly portable.
Comparison of GR-119P with old model
The GR-119P offers significant improvements over older wired models, including wireless operation and higher performance.

11. Warranty and Support

For detailed warranty information, product support, or to inquire about replacement parts, please refer to the official product page or contact the seller directly. Keep your purchase records for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.