DOOYA DC136N

Contents

DOOYA DC136N Universal Receiver Controller Instruction Manual

Model: DC136N

Brand: DOOYA

1. Introduction

The DOOYA DC136N is a universal receiver controller designed to provide remote control functionality for various motorized applications, including garage doors, roller shutters, and tubular motors. This device allows for convenient operation of your motorized systems using wireless remote controls, and in some configurations, through wireless switches, password locks, Bluetooth, or Wi-Fi connectivity.

2. Package Contents

The package typically includes the following components. Please verify all items are present upon unboxing:

  • DOOYA DC136N Receiver Controller Unit
  • Power Cable with 3-wire plug
  • Remote Control Cables (4-wire harness for motor connection)
  • Remote Controls (quantity and type vary by model configuration)

Note: The number and type of remote controls or additional control devices (e.g., wireless switch, thumb remote, wireless password lock, Bluetooth/WIFI module) depend on the specific model variant purchased. Refer to your order details for exact inclusions.

DOOYA DC136N Receiver with 2 Remote Controls

Figure 1: Typical package contents including the DC136N receiver, power cable, and two standard remote controls.

DOOYA DC136N Receiver with 4 Remote Controls

Figure 2: Example of a package with four remote controls (two standard, two thumb-style).

3. Specifications

FeatureSpecification
Model NumberDC136N
MaterialPlastic
TypePower Tool Parts (Receiver Controller)
OriginMainland China
Operating Frequency433 MHz
Power Input230V/50Hz
Package Dimensions (approx.)Length: 5 cm, Width: 5 cm, Height: 5 cm
Package Weight (approx.)0.5 kg
High-concerned chemicalNone
Back of DC136N Receiver showing model and frequency

Figure 3: Rear view of the DC136N receiver, displaying model number, frequency, and voltage information.

4. Setup and Installation

WARNING: Electrical installation should only be performed by qualified personnel. Ensure power is disconnected before beginning any wiring to prevent electric shock.

4.1 Wiring Connections

The DC136N receiver requires connections for both power supply and the tubular motor. Carefully follow the wiring diagram below, matching wire colors to their designated functions.

DC136N Wiring Diagram for Power and Motor

Figure 4: Detailed wiring connections for the DC136N receiver.

Power Plug (3 wires):

  • Blue: Fire Line
  • Brown: Neutral Line
  • Yellow/Green: Ground Wire

Remote Control Cables (4 wires, connected to the motor):

  • Blue: Common Line
  • Brown: Door Opening Line
  • Black: Door Closing Line
  • Yellow/Green: Ground Wire
Motor Wiring Harness Connection

Figure 5: Close-up of the motor wiring harness connection, ensuring correct color matching.

Ensure all connections are secure and insulated properly. Incorrect wiring can damage the device or motor, and poses a safety risk.

4.2 Mounting the Receiver

The receiver unit can be mounted using the keyhole slot on its back. Choose a location that is protected from moisture and extreme temperatures, and allows for good signal reception from remote controls.

Back of DC136N Receiver showing mounting slot

Figure 6: Rear view of the DC136N receiver, showing the mounting slot.

5. Operation

5.1 Remote Control Pairing

To pair a new remote control with the DC136N receiver:

  1. Locate the "pairing button" (对码键) on the side of the receiver unit.
  2. Press and hold the pairing button until the indicator light on the receiver changes (e.g., flashes or turns solid).
  3. While the receiver is in pairing mode, press any button on the remote control you wish to pair.
  4. The receiver's indicator light should confirm successful pairing (e.g., flash rapidly then turn off).
  5. Test the remote control to ensure it operates the motor correctly.
DC136N Receiver with Pairing and Reversing Buttons

Figure 7: Side view of the DC136N receiver, highlighting the pairing button (top) and reversing button (bottom).

5.2 Motor Direction Reversal

If the motor operates in the opposite direction to what is desired (e.g., "open" button closes the door), you can reverse its direction:

  1. Locate the "reversing button" (换向键) on the side of the receiver unit.
  2. Press this button once. The motor's direction should now be reversed.
  3. Test the remote control to confirm the correct operation direction.

5.3 Manual Control Buttons

The receiver unit also features physical buttons for direct control of the motor:

  • Up Button: Activates the motor to open/raise.
  • Stop Button: Stops the motor.
  • Down Button: Activates the motor to close/lower.
DC136N Receiver with Manual Control Buttons

Figure 8: Side view of the DC136N receiver, showing the manual control buttons (Up, Stop, Down).

6. Maintenance

  • Keep the receiver unit clean and free from dust and debris.
  • Avoid exposing the unit to moisture, direct sunlight, or extreme temperatures.
  • Regularly check wiring connections for any signs of wear or damage.
  • Replace remote control batteries as needed.

7. Troubleshooting

7.1 Motor Not Responding to Remote Control

  • Check if the receiver unit has power (indicator lights should be on).
  • Ensure the remote control batteries are not depleted.
  • Re-pair the remote control with the receiver (refer to Section 5.1).
  • Verify that the remote control is within the effective operating range of the receiver.

7.2 Motor Operates in Wrong Direction

  • Use the "reversing button" on the receiver to change the motor's direction (refer to Section 5.2).

7.3 Intermittent Operation

  • Check for sources of interference (e.g., other wireless devices, large metal objects) near the receiver or motor.
  • Ensure all wiring connections are secure.

8. User Tips

  • Inspect Upon Arrival: Carefully check the receiver unit and remote controls for any physical damage or signs of prior use immediately upon receipt.
  • Remote Button Language: Be aware that some remote control buttons may feature non-English characters. Familiarize yourself with the button functions during setup and testing.
  • Wiring Verification: Double-check all wiring connections, especially the motor and power lines, to ensure they match the provided diagrams and color codes. This is critical for proper function and safety.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or refer to the product's official documentation. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.