1. Introduction
Thank you for choosing the Reobrix RC Remote Control Skip Loading Truck Building Blocks. This set allows you to construct a detailed city engineering vehicle with remote control capabilities, offering an engaging and educational building experience. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure optimal enjoyment of your model.

2. Product Overview
The Reobrix Skip Loading Truck is a sophisticated building block set designed for enthusiasts aged 14 and above. It features 1918 pieces of high-quality ABS plastic, forming a realistic and functional model of a skip loading truck. The model includes dual remote control modes (2.4G remote control and APP remote control) for dynamic play.
2.1. Package Contents
- Building block set (1918 pieces)
- Paper instruction manual
- Power Accessories: 1 x XL Motor, 1 x Servo Motor, 1 x LED Light, 1 x Battery Box (batteries not included)

3. Safety Information
WARNING: Not suitable for children under 36 months due to small parts which may present a choking hazard.
California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Always supervise children during assembly and play.
- Keep small parts away from infants and young children.
- Do not ingest any parts of the building block set.
- Ensure proper battery installation and usage as per the battery box instructions (batteries not included).
4. Setup
4.1. Assembly
Follow the detailed step-by-step instructions provided in the included paper manual to assemble the Reobrix Skip Loading Truck. Ensure all pieces are correctly connected to achieve the intended functionality and structural integrity.
4.2. Power Installation
- Install the required batteries (not included) into the Battery Box according to the polarity markings.
- Connect the XL Motor, Servo Motor, and LED Light to the Battery Box as indicated in the assembly manual.
- Ensure all connections are secure.
4.3. Remote Control Pairing
The truck supports both a 2.4G physical remote control and an APP remote control. Refer to the specific instructions in the paper manual for pairing your chosen control method with the truck's receiver. Typically, this involves powering on the truck and the remote/app, then initiating a pairing sequence.

5. Operating Instructions
Once assembled and powered, your Reobrix Skip Loading Truck offers various interactive functions. Use either the physical remote control or the dedicated app to operate the vehicle.
5.1. General Controls
- Driving: Use the directional controls on your remote or app to move the truck forward, backward, left, and right.
- Steering: Twist the right button on the remote to turn the wheels left or right.
- Opening Doors: The truck's cabin doors can be opened left and right for added realism.
- Opening Head: The truck's head can be opened, revealing mechanical linkage functions at the rear.
5.2. Skip Loader Operations
The skip loader mechanism allows for simulated loading and unloading operations with free body lift. The video below demonstrates these functions.
Specific steps for loader operations:
- Deploying Rear Feet (Stabilizers): Rotate the right button on the remote to pull down the rear feet for stability during loading/unloading.
- Lifting Rear Wheel/Suspension: Rotate the left button on the remote to lift or lower the rear wheel assembly.
- Body Arm Movement: Rotate the left button on the remote to move the body arm rearward to lower the container body.
- Container Dumping: Rotate the left button on the remote to flip the container body back, simulating dumping.
- Securing the Body: Ensure the linkable bricks secure the container body to the truck frame when not in operation.



6. Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe down the model to remove dust and dirt. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
- Part Inspection: Periodically check for any loose or damaged parts. Re-attach or replace as necessary.
- Battery Care: Remove batteries from the Battery Box if the model will not be used for an extended period to prevent leakage.
7. Troubleshooting
- Model not responding to remote control:
- Ensure the Battery Box has fresh batteries and is switched ON.
- Verify that the remote control also has fresh batteries and is switched ON.
- Re-attempt the remote control pairing process as described in the manual.
- Check all motor and LED connections to the Battery Box.
- Mechanical functions not working smoothly:
- Inspect the affected area for any misaligned or incorrectly assembled blocks.
- Ensure no foreign objects are obstructing the gears or moving parts.
- Verify that the motors are securely connected and receiving power.
- Missing or Damaged Parts: If you discover any parts missing or damaged upon opening the package or during assembly, please contact customer service for assistance.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Skip Loading Truck |
| Product Code | NO.22016 |
| Main Material | ABS Plastic |
| Block Shape | Self-Locking Bricks (Compatible with Lego) |
| Number of Pieces | 1918 PCS |
| Recommended Age | 14+ years |
| Product Dimensions (L x W x H) | 39 cm x 17.5 cm x 26.5 cm |
| Control Method | 2.4G Remote Control / APP Remote Control |
| Power Accessories | 1 x XL Motor, 1 x Servo Motor, 1 x LED Light, 1 x Battery Box |
| Package Dimensions (L x W x H) | 60 cm x 9.5 cm x 40 cm (Original Box) |
| Package Weight | 3.26 kg |

9. User Tips
No specific user tips were available from reviews or Q&A for this product at the time of manual creation. However, general tips for building block sets include:
- Organize your pieces before starting assembly to make the process smoother.
- Double-check each step in the manual to avoid errors that might require reassembly.
- Test the remote control functions periodically during assembly if possible, to ensure proper wiring and motor installation.
10. Warranty and Support
All parts are quality checked before shipment. If you find any parts missing or damaged upon delivery or during assembly, please contact customer service immediately for assistance. Provide your order details and a clear description or image of the issue to facilitate a quick resolution.
For any other inquiries or support needs, please reach out to the seller directly through your purchase platform.