XTOOL Anyscan A30X Wireless Scan Tool User Manual

1. Introduction

The XTOOL Anyscan A30X is a full-system wireless scan tool designed for convenient vehicle diagnostics. It connects to your mobile phone (iOS or Android) via Bluetooth and offers a wide range of diagnostic and special functions for over 80 vehicle brands and 5,000+ models. This compact device provides professional-grade diagnostic capabilities, including reading and clearing trouble codes, live data streaming, actuation tests, and various maintenance resets.

For a comprehensive list of compatible car models and functions, please visit the official XTOOL website: https://www.xtooltech.com/english/FunctionQuery.html

A detailed user manual in PDF format is also available: User Manual (PDF)

2. Setup

2.1. Download & Install APP

To begin, you need to download and install the Anyscan+ application on your mobile device. Scan the QR code provided in the original manual (or search for "Anyscan+" in your app store) to access the download page.

Note: Only the "Anyscan+" APP is supported for binding and operation, not the older "Anyscan" APP.

2.2. Create Account & Log in

After installing the app, open it and follow the on-screen prompts to create a new user account. You will typically need to enter your email address to receive a verification code, then complete the registration process and log in.

2.3. Activate Device

Once logged in, navigate to the "My Devices" section within the Anyscan+ app to add your new A30X device. You can activate the device by scanning the QR code located on the A30X unit or by manually entering its Serial Number (S/N) and activation code.

2.4. Vehicle Connection

Locate the OBD port on your vehicle. Common locations include under the dashboard on the driver's side. A flashlight may be helpful to find the port. Insert the Anyscan A30X into the vehicle's OBD port. The device powers on automatically when connected to the vehicle's 12-volt power supply. A solid green light on the A30X indicates it is powered on.

2.5. Bluetooth Connection

The Anyscan A30X communicates with your smartphone via Bluetooth 5.0. The working range for Bluetooth is approximately 10 meters (32.81 ft). If the signal is lost due to moving out of range, it will automatically restore once the device is back within transmission range.

For iOS Devices: Click the VCI icon in the upper right corner of the Anyscan+ app. The app will redirect you to your mobile device's Bluetooth list. Select the device named with the 'A30X' prefix to connect. Upon successful connection, the device's solid green light will turn blue, accompanied by a 'beep' sound, and the app icon will update.

For Android Devices: After activating the device, opening the Anyscan+ app will automatically prompt for Bluetooth activation to pair with your bound A30X device. Successful pairing will trigger an automatic scan and connection. The device's solid green light will turn blue with a 'beep' sound, and the app icon will update simultaneously. For Android users, you may need to pair the Anyscan+ device in your phone's system Bluetooth settings before connecting within the app.

2.6. Download & Update Software

The Anyscan+ app provides a dedicated section for software management. All available software updates are displayed on this page. You can choose to download specific software packages individually by pressing the arrow button next to the desired software, or you can update all available software at once by selecting "Updates All."

Important: The DG_AOBD package must be downloaded before using the Vehicle Test module.

3. Operating Instructions

3.1. Diagnostics Function

The diagnostic function allows you to read ECU information, read and clear Diagnostic Trouble Codes (DTCs), and display live data and freeze frames. It can access electronic control units (ECUs) across all available vehicle control systems, including the engine, transmission, anti-lock braking system (ABS), airbag system (SRS), body control module (BCM), battery management system (BMS), tire pressure monitoring system (TPMS), steering and suspension system (SAS), and perform various actuation tests.

3.1.1. Auto Scan

Click the "AUTO SCAN" button in the app. The tool will automatically scan for vehicle models and information. You will then select the corresponding options and confirm the scanned vehicle information. If required software is not installed, you will be directed to the updates page.

Note: Automatic detection may not work on all cars. If it fails, please navigate manually and try again.

3.1.2. Diagnosis

Click the "Diagnosis" button on the main screen to enter the diagnosis menu. All supported vehicle brands will be displayed. You can select your vehicle's region, choose the correct brand, and initiate the diagnostic process. For some brands (e.g., Volkswagen), you may have options for Automatic Detection, Manual Selection, or System Selection.

3.1.3. Diagnosis Functions Overview

The Diagnosis System supports the following core functions:

• Read ECU Information: Displays ECU version information, including software and hardware versions, models, and production dates.
• Read & Clear Trouble Code: Reads stored DTCs and provides detailed definitions and explanations. Allows clearing of non-permanent trouble codes.
• Live Data: Displays real-time parameters from the ECU (e.g., engine oil temperature, engine speed, coolant temperature). This helps in identifying faulty components.
• Actuation Test (Bi-Directional Control): Enables the scan tool to send commands to a module to perform specific tests or functions, such as actuating relays or injectors.
• Freeze Frame: Records critical parameter values at the moment a DTC is set, providing a snapshot of vehicle conditions during a fault.

3.2. OBD II Functions

The OBDII (On-board diagnostics) system allows the Anyscan+ to communicate with the vehicle's Powertrain Control Module (PCM) and access various diagnostic functions:

• Read & Clear Trouble Codes: Accesses and clears both stored and pending emission-related DTCs.
• Live Data: Streams real-time sensor data from the vehicle.
• Read Freeze Frame: Captures engine parameters at the time a fault code was triggered.
• Read ECU Information: Retrieves specific vehicle information from the ECU.
• Component Test: Enables bi-directional control of ECM components for testing.
• On-Board Monitor Test: Views results of on-board monitor tests.
• O2 Sensor Monitoring Test: Checks the calibration and function of O2 sensors.
• I/M Readiness: Checks the readiness of monitoring systems for emissions compliance.

3.3. Special Functions

The Anyscan A30X offers over 26 special reset and adaptation functions for vehicle maintenance and service. These functions help in resolving common problems and performing routine maintenance tasks.

Key special functions include:

• Oil Reset
• BMS Reset
• EPB Reset
• DPF & GPF Regeneration
• ABS Bleeding
• Injector Coding
• Throttle Adaptation
• TPMS Reset (US/EU/JP/KR/AU)
• Suspension & Gearbox Adaptation
• Power Balance
• Sunroof & Window Initialization
• Headlight Calibration
• AdBlue Reset
• EVAP Test
• Control Unit Reset
• A/C Relearn
• And more.

4. Maintenance

4.1. Oil Reset

This function resets the Engine Oil Life System, which calculates the optimal oil change interval based on driving conditions. It is crucial to reset this system after every oil change to ensure accurate tracking and prevent the service lamp from illuminating.

4.2. EPB Reset

The Electronic Parking Brake (EPB) reset function allows for safe maintenance of the electronic parking brake system and brake pads. This includes retracting and releasing the brake pump, G-sensor calibration, and body angle calibration. It is necessary to perform an EPB reset after replacing brake pads or if the brake pad wear sensor triggers a warning.

4.3. DPF & GPF Regeneration

This function is used to clear particulate matter from the Diesel Particulate Filter (DPF) or Gasoline Particulate Filter (GPF) to restore engine performance and prevent blockages. Regular regeneration is essential for vehicles equipped with these systems.

4.4. Other Maintenance Functions

The Anyscan A30X supports a variety of other maintenance functions, including:

• BMS Reset: Resets the battery management system after battery replacement.
• ABS Bleeding: Bleeds air from the ABS system after brake component replacement.
• Injector Coding: Codes new injector control values into the ECU.
• Throttle Adaptation: Adapts the throttle body to the vehicle's ECU.
• TPMS Reset: Resets the Tire Pressure Monitoring System after tire rotation or sensor replacement.
• Suspension & Gearbox Adaptation: Adapts suspension and gearbox settings.
• Power Balance: Checks the power output of each cylinder.
• Sunroof & Window Initialization: Initializes sunroof and window systems.
• Headlight Calibration: Calibrates headlight aiming.
• AdBlue Reset, EVAP Test, Control Unit Reset, A/C Relearn: Various other system resets and tests.

5. Troubleshooting

5.1. Precautions for Diagnosis

• The device operates within a voltage range of +9V to +36V DC.
• When performing special functions, follow all on-screen prompts and meet test conditions (e.g., engine water temperature, turning off headlights/AC, accelerator pedal position).
• If testing is impossible or data is abnormal, search for the vehicle's ECU and select the correct menu based on the ECU nameplate.
• Ensure vehicle diagnostic software is up-to-date. If issues persist, consult XTOOL technical service.
• Do not shut down the device directly during a Diagnostics function. Always cancel the task and return to the main interface before powering off.

5.2. Error Codes (DTCs)

The Anyscan A30X can read various types of DTCs:

• Stored Code: Current emission-related DTCs from the ECM. Higher priority codes overwrite lower ones.
• Permanent Codes: Emission-related fault codes stored in the ECU's non-volatile memory. These cannot be cleared by standard tools and only clear automatically after the fault is repaired and verified by a drive cycle.
• Pending Code: Codes whose setting conditions were met in the last drive cycle but require more consecutive drive cycles to set permanently.

If the device shows "System is OK" or "No Trouble Code," it means no related trouble code is stored in the ECU. Some issues might be mechanical or sensor-related, which can be identified through Live Data analysis.

5.3. Warning Light Symbols

The app includes a function to analyze vehicle dashboard warning lights. It helps users match illuminated icons with their risk level (red/yellow), determine the urgency of the fault, and provides the cause of the fault.

5.4. Recall Notice

This function allows you to quickly check if your vehicle is part of a manufacturer recall campaign, contributing to driving safety. You can select the brand, model, and year to query for relevant notices.

6. Specifications

7. Warranty & Support

7.1. Aftersales Services

For technical support or inquiries, please contact XTOOL using the following information:

• E-Mail: supporting@xtooltech.com
• Tel: +86 755 21670995 or +86 755 86267858 (China)
• Official Website: www.xtooltech.com

When seeking technical support, please provide your device serial number, VIN code, vehicle model, software version, and other relevant details. Screenshots or videos can greatly assist in resolving your problem.

7.2. Compliance Information

The XTOOL Anyscan A30X complies with various regulatory standards:

• FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to specific conditions to prevent harmful interference.
• ISED Statement (Canada): This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s).
• CE Declaration of Conformity: Shenzhen Xtooltech Intelligent Co., Ltd. declares that this Wireless Diagnostic Module complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
• UKCA: This Wireless Diagnostic Module satisfies all technical regulations applicable within the scope of UK Radio Equipment Regulations (SI 2017/1206).

For full details on compliance, please refer to the official user manual PDF.

8. User Tips

• Language Settings: The default language is English. If you need to switch to another language, contact XTOOL support with your device's S/N to unbind and rebind the language configuration.
• App Compatibility: Always use the "Anyscan+" app for optimal performance and device binding. The older "Anyscan" app is not compatible.
• Regular Updates: Keep your device's software and firmware updated to ensure access to the latest features, vehicle coverage, and bug fixes.
• Safe Operation: Always ensure adequate ventilation when working with a running vehicle due to exhaust fumes. Avoid touching hot engine components.