SEEMAR S3S Electric Scooter User Manual

Important Safety Information

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage. While using the product, please wear protective equipment and fully comply with the applicable law and regulations.

• Always wear a helmet and other protective gear (knee pads, elbow pads) when riding.
• Do not ride in wet conditions, heavy rain, or through puddles.
• Avoid riding on uneven surfaces, potholes, or over obstacles.
• Ensure all bolts and quick releases are securely tightened before each ride.
• Familiarize yourself with local laws and regulations regarding electric scooter use.
• Do not allow children under the age of 16 to operate the scooter.
• Maintain a safe distance from other vehicles and pedestrians.
• Avoid sudden acceleration or braking.
• Do not perform stunts or jumps.
• Always hold the handlebars with both hands while riding.

Product Overview

The SEEMAR S3S is a foldable electric kick scooter designed for urban commuting and leisure. It features a powerful motor, long-range battery, and smart app control for an enhanced riding experience.

Specifications

Setup Guide

1. Unboxing and Assembly

   • Carefully remove all components from the packaging.
   • Unfold the scooter: Lift the stem until it locks into place. Ensure the folding mechanism is securely latched.
   • Attach the handlebars: Connect the handlebar unit to the stem, ensuring all cables are properly routed and not pinched. Secure with screws if necessary (check included hardware).
   • Check tire pressure (if applicable for pneumatic tires, though product states solid tires).

2. Initial Charging

   • Before first use, fully charge the scooter's battery.
   • Locate the charging port, usually on the side of the deck.
   • Connect the charger to the scooter, then plug the charger into a power outlet.
   • The charging indicator on the charger will typically turn red during charging and green when fully charged.
   • Charging time is approximately 5-8 hours. Do not overcharge.

Operating Instructions

1. Power On/Off

   • To power on: Press and hold the power button on the display for a few seconds.
   • To power off: Press and hold the power button again until the display turns off.

2. Riding Modes and Speed Control

   • The scooter features three speed modes. Press the mode button (usually near the power button) to cycle through them.
   • Speed modes typically include ECO (energy-saving), D (standard), and S (sport/maximum speed).
   • To accelerate, gently press the throttle lever.
   • To brake, use the mechanical disc brake lever on the handlebar.

3. Smart App Control

   • Download the official SEEMAR app from your smartphone's app store.
   • Enable Bluetooth on your phone and open the app.
   • Follow the in-app instructions to pair your scooter.
   • Through the app, you can:
     • Lock/unlock the scooter.
     • Set custom speed limits.
     • Activate cruise control.
     • View real-time riding data (speed, battery level, distance).
     • Update firmware (if available).

4. Folding and Storage

   • To fold: Ensure the scooter is powered off. Locate the folding latch mechanism at the base of the stem. Release the latch and fold the stem downwards until it clicks into place, securing it to the rear fender.
   • The scooter folds compactly in 3 steps.
   • Store the scooter in a dry, cool place away from direct sunlight and extreme temperatures.

   

Maintenance

• Battery Care

  • Charge the battery regularly, even if not using the scooter for extended periods (at least once every 30 days).
  • Avoid completely draining the battery.
  • Do not expose the battery to extreme temperatures (hot or cold).
  • Use only the original charger provided with the scooter.

• Tire Maintenance

  • The S3S uses 8.5-inch solid tires, which are puncture-proof and require minimal maintenance.
  • Periodically inspect tires for wear and tear.

• Brake System

  • Regularly check the mechanical disc brake for proper function and responsiveness.
  • Adjust brake tension if necessary (refer to a qualified technician if unsure).
  • Ensure brake pads are not excessively worn.

• General Cleaning and Storage

  • Clean the scooter with a damp cloth. Do not use high-pressure water or immerse the scooter in water.
  • Avoid using abrasive cleaners or solvents.
  • Store the scooter in a dry, indoor environment.
  • Keep the scooter away from flammable materials.

Troubleshooting

User Tips

• For optimal battery life, avoid frequent full discharges and charges. Keep the battery level between 20% and 80% when possible.
• When riding on inclines, especially with a heavier load (over 80 kg), it's recommended to maintain a steady speed and avoid sudden stops to preserve motor life.
• Utilize the smart app for personalized settings, such as adjusting speed limits, to match your riding preferences and local regulations.
• Always check the scooter's folding mechanism before riding to ensure it is fully locked and secure.
• The solid tires are maintenance-free for punctures, but regular visual inspection for cracks or damage is still advised.

Warranty and Support

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and to initiate a support request, please refer to the documentation provided at the time of purchase or contact the seller directly.

Keep your proof of purchase for warranty claims.