1. Introduction
Thank you for purchasing the NEEWER RF1-C Macro Ring Flash. This device is designed to provide precise and even illumination for macro photography, eliminating harsh shadows and enhancing detail. It features TTL automatic metering, independent control of flash tubes, and a variety of flash modes to suit your creative needs.
Please read this manual thoroughly before using the product to ensure safe operation and optimal performance.
2. Package Contents
- NEEWER RF1-C Flash Unit
- Ring Flash Head
- Connecting Cable
- Lens Adapter Rings (49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm)
- Color Filters (White, Red, Green, Orange)
- User Manual (this document)

Image: NEEWER RF1-C Macro Ring Flash with its main components including the flash unit, ring light, and various lens adapter rings.
3. Setup
3.1. Power Supply
- Open the battery compartment on the flash unit.
- Insert 4 AA alkaline batteries (recommended) or Ni-MH batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
3.2. Attaching to Camera
- Slide the flash unit onto your camera's hot shoe.
- Tighten the locking ring or lever on the flash unit to secure it in place.
3.3. Mounting the Ring Flash Head
- Select the appropriate lens adapter ring that matches the filter thread size of your camera lens.
- Screw the chosen adapter ring onto the front of your camera lens.
- Attach the ring flash head to the adapter ring by aligning the mounting points and twisting until it locks securely.
- Connect the coiled cable from the ring flash head to the dedicated port on the main flash unit.

Image: Comprehensive diagram showing the NEEWER RF1-C mounted on a camera, including the flash unit, ring light, and adapter rings. This image also details various features and specifications.
4. Operating Instructions
4.1. Power On/Off
Press and hold the power button on the flash unit to turn it on or off. The LCD screen will illuminate upon power-on.
4.2. Flash Modes
The RF1-C supports multiple flash modes, selectable via the mode button on the flash unit:
- TTL Auto Mode: Automatic flash exposure control, ideal for quick and accurate lighting.
- M (Manual) Mode: Allows manual adjustment of flash power from 1/1 to 1/256 in 0.3 gear increments.
- Multi (Strobe) Mode: Fires a series of rapid flashes during a single exposure, useful for capturing multiple stages of movement. Adjustable up to 100 times at 199Hz flash frequency.
4.3. Independent Flash Tube Control
The RF1-C features two independently controllable flash tubes (A and B) with a light ratio range of 8:1-1:1-1:8. This allows for creative lighting effects in macro photography.

Image: Diagram illustrating the independently controllable flash modes: Full Flash Mode, AB Flash Ratio Mode, Left Flash Mode, and Right Flash Mode.
4.4. Automatic Metering Functions
The flash supports advanced metering functions for precise exposure:
- FEC (Flash Exposure Compensation): Adjusts flash output to fine-tune exposure (typically ±3 Stops).
- FEB (Flash Exposure Bracketing): Takes multiple shots at different flash exposures to ensure optimal results.
- FEL (Flash Exposure Lock): Locks the flash exposure for consistent lighting across multiple shots.

Image: Visual representation of Automatic Metering features: Flash Exposure Compensation (FEC), Flash Bracketing (FEB), and Flash Exposure Lock (FEL).
4.5. Dual Modeling Lights
Two auxiliary focus lights facilitate focusing in dark environments, improving imaging accuracy.
4.6. Custom Function Settings
The RF1-C offers four customizable functions to meet advanced photography requirements:

Image: Display of the flash unit's LCD screen and a table detailing the 4 Custom Function Settings.
| Function Symbol | Custom Function | Setting Symbol | Setting & Explanation |
|---|---|---|---|
| STBY | Auto Sleep | ON OFF | Turn on Turn off |
| BEEP | Buzzer | ON OFF | Turn on Turn off |
| LIGHT | Backlight Illumination Time | 12s OFF ON | Auto off after 12s Always off Always on |
| LCD | LCD Contrast | -3 - +3 | 7 levels |
4.7. Using Color Filters
The RF1-C comes with white, red, green, and orange color filters to add creative effects and adjust the mood of your macro shots. Simply attach the desired filter to the ring flash head.

Image: Illustration of how to apply color filters (White, Red, Green, Orange) to the ring flash head to change the lighting effect.
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the flash unit and ring light. For stubborn dirt, slightly dampen the cloth with water. Do not use solvents or abrasive cleaners.
- Storage: When not in use, remove batteries to prevent leakage. Store the flash in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the flash to strong impacts, as this can damage internal components.
- Lens Adapter Rings: Keep adapter rings clean and free of dust to ensure smooth attachment to lenses.
6. Troubleshooting
- Flash Not Firing:
- Check if the flash unit is securely mounted on the camera's hot shoe.
- Ensure batteries are correctly inserted and have sufficient charge.
- Verify the connecting cable between the flash unit and ring head is properly attached.
- Check camera flash settings to ensure external flash is enabled.
- Incorrect Exposure:
- Adjust FEC (Flash Exposure Compensation) settings.
- Ensure the flash mode (TTL, M) is appropriate for your shooting conditions.
- Check camera ISO, aperture, and shutter speed settings.
- LCD Screen Not Displaying:
- Ensure the unit is powered on.
- Check battery level.
- If the issue persists, contact customer support.
- Ring Flash Not Lighting Up:
- Verify the cable connection to the main flash unit.
- Check for any physical damage to the ring flash head.
7. Specifications
| Feature | Specification |
|---|---|
| Model | RF1-C |
| Guide Number | GN15 (ISO 100) |
| Flash Coverage | 28mm (fixed) |
| Flash Mode | TTL, M, Multi |
| Flash Ratio | 8:1-1:1-1:8 (in 1/2 stop increments) |
| Flash Power | 76Ws |
| Flash Duration | 1/300s - 1/20000s |
| Recycle Time | Approx. 0.1-5s |
| Effective Distance | 0.2-5m |
| Flash Times | 100-800 times (AA alkaline batteries) |
| Color Temperature | 5600K±200K |
| External Interface | Hot shoe, PC sync cable, external power interface |
| Power Supply | 4x AA alkaline batteries (recommended) or Ni-MH batteries (not included) |
| Dimensions (Flash Unit) | 140x60x50mm |
| Dimensions (Ring Flash) | 130x130x27mm |
| Weight | 368g (without batteries) |
| Adapter Rings Included | 49mm, 52mm, 55mm, 58mm, 62mm, 67mm, 72mm, 77mm |
8. User Tips
No specific user tips were available from reviews or Q&A for this product.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the retailer/manufacturer directly. Keep your proof of purchase for warranty claims.