ROBORE L20

Contents

ROBORE L20 Treadmill User Manual

Model: L20

1. Introduction

Thank you for choosing the ROBORE L20 Treadmill. This manual provides essential information for the safe and effective use, assembly, operation, and maintenance of your new fitness equipment. The ROBORE L20 is designed for home use, featuring a powerful yet quiet 3.5HP brushless motor, adjustable incline, and a spacious running belt, all integrated into a foldable, space-saving design.

Please read this manual thoroughly before operating the treadmill and keep it for future reference.

2. Important Safety Information

WARNING: To reduce the risk of serious injury, read all instructions before using this treadmill.

  • Consult your physician before starting any exercise program, especially if you have pre-existing health conditions.
  • Always wear appropriate athletic footwear and clothing while using the treadmill.
  • Ensure the treadmill is placed on a flat, stable surface with at least 2 meters (6.5 feet) of clear space behind it and 0.6 meters (2 feet) on each side.
  • Keep children and pets away from the treadmill at all times, especially during operation.
  • The safety key must be attached to your clothing during use. In case of an emergency or if you fall, the safety key will detach, stopping the treadmill immediately.
  • Do not exceed the maximum user weight of 180 kg (400 lbs).
  • Never operate the treadmill if it has a damaged cord or plug, or if it is not working properly.
  • Do not attempt to service the treadmill yourself. Contact qualified service personnel for repairs.
  • Always hold the handrails when starting or stopping the treadmill, or when adjusting speed/incline.

3. Package Contents

Carefully unpack your ROBORE L20 Treadmill and verify that all components are present. The treadmill comes 90% pre-assembled.

ROBORE L20 Treadmill 90% pre-assembled with tools

Image: The ROBORE L20 Treadmill in its 90% pre-assembled state, folded flat, with included tools and incline adjustment blocks.

Your package should include:

  • ROBORE L20 Treadmill (main unit)
  • User Manual (this document)
  • Safety Key
  • Assembly Tools (e.g., Allen wrench)
  • Incline Adjustment Blocks (red blocks shown in image)
  • Power Cord

4. Setup and Assembly

The ROBORE L20 Treadmill is designed for quick and easy setup, arriving 90% pre-assembled.

4.1 Unfolding the Treadmill

  1. Place the folded treadmill on a flat, stable surface.
  2. Carefully lift the console/handrail assembly until it locks into the upright position.
  3. Ensure the screen is flipped 90 degrees upwards for optimal viewing.
  4. Verify all locking mechanisms are securely engaged before use.
Fully foldable treadmill with screen flipped 90 degrees and transport wheels

Image: Diagram illustrating the fully foldable design of the treadmill, with the screen flipped 90 degrees, and the integrated transport wheels for easy movement. Dimensions for folded and unfolded states are shown.

4.2 Power Connection

  1. Plug the power cord into the treadmill's power input.
  2. Plug the other end of the power cord into a grounded electrical outlet.
  3. Ensure the power switch (usually located near the power cord input) is in the 'ON' position.

5. Operating Instructions

5.1 Control Panel Overview

Familiarize yourself with the treadmill's control panel and handrail functions:

Detailed diagram of treadmill control panel and handrails

Image: Detailed diagram of the treadmill's control panel and multi-function handrails, highlighting the touchscreen interface with quick speed selection, start/stop, program selection, speed adjustment buttons, heart rate monitor sensors, safety key slot, and incline adjustment buttons.

  • Touchscreen Display: Shows time, speed, distance, calories, and heart rate. Features quick speed selection (3MPH, 5MPH, 7MPH), Start/Stop, and program selection.
  • Cup Holders: Located on either side of the console.
  • Safety Key Slot: Central position on the console.
  • Handrail Controls:
    • Left Handrail: Speed + / Speed - buttons.
    • Right Handrail: Incline + / Incline - buttons.
    • Heart Rate Monitor: Metal sensors on both handrails.

5.2 Starting a Workout

  1. Attach the safety key clip to your clothing and insert the magnetic end into the safety key slot on the console. The display will illuminate.
  2. Step onto the treadmill's side rails, not the running belt.
  3. Press the 'Start' button on the touchscreen or the handrail. The belt will begin moving at a low speed.
  4. Carefully step onto the running belt and begin walking.

5.3 Adjusting Speed

  • Use the 'Speed +' or 'Speed -' buttons on the touchscreen or the left handrail to increase or decrease the running speed.
  • For quick adjustments, use the '3MPH', '5MPH', or '7MPH' quick select buttons on the touchscreen.
  • The maximum speed is 14 km/h (8.7 MPH).

5.4 Adjusting Incline

The ROBORE L20 features a 2-level manual incline adjustment (10%-15%). This adjustment is performed physically using the provided incline blocks.

  1. Stop the treadmill and unplug it from the power outlet.
  2. Locate the incline adjustment points at the rear of the treadmill base.
  3. Lift the rear of the treadmill and insert the red incline adjustment blocks into the designated slots to achieve your desired incline level (e.g., 10% or 15%).
  4. Ensure the blocks are securely in place on both sides before plugging the treadmill back in and resuming your workout.
Manual incline adjustment mechanism with red support blocks

Image: Close-up view demonstrating the manual incline adjustment mechanism using red support blocks to achieve different incline angles (e.g., 1.2°, 3.2°, 4.2°).

5.5 Heart Rate Monitoring

To monitor your heart rate, gently grasp the metal sensors on both handrails with clean, dry hands. Your heart rate will be displayed on the LED screen after a few seconds.

5.6 Using Programs

The treadmill offers 12 pre-set programs. Refer to the on-screen menu to select and start a program. Each program has varying speed and incline profiles to challenge your workout.

5.7 Stopping a Workout

  1. Press the 'Stop' button on the touchscreen or handrail. The belt will gradually slow down and stop.
  2. Alternatively, pull the safety key from its slot to immediately stop the treadmill in an emergency.
  3. Once the belt has completely stopped, step off the treadmill.

5.8 Folding for Storage

The ROBORE L20 is designed for convenient storage in small spaces.

  1. Ensure the treadmill is stopped and unplugged.
  2. Flip the screen down 90 degrees.
  3. Carefully release the locking mechanism for the console/handrail assembly and fold it downwards towards the running deck.
  4. The treadmill can then be stored vertically against a wall or horizontally under a bed.
  5. Use the integrated transport wheels to easily move the folded treadmill.
Space-saving treadmill folding and moving with wheels

Image: Illustration of the treadmill being folded for space-saving storage and easily moved using its transport wheels.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your treadmill.

6.1 Cleaning

  • After each use, wipe down the console and other surfaces with a damp cloth to remove sweat and dust. Avoid abrasive cleaners or solvents.
  • Periodically vacuum underneath the treadmill to prevent dust and debris from accumulating.

6.2 Running Belt Lubrication

The running belt requires periodic lubrication to reduce friction and wear. Check your manual for specific lubrication intervals (typically every 3-6 months depending on usage).

  1. Turn off and unplug the treadmill.
  2. Loosen the rear roller bolts slightly to lift the belt.
  3. Apply a silicone-based treadmill lubricant (not included) evenly under the center of the running belt.
  4. Tighten the rear roller bolts, ensuring the belt is centered and tensioned correctly.
  5. Run the treadmill at a low speed for a few minutes to distribute the lubricant.

6.3 Running Belt Adjustment

If the running belt starts to slip or drift to one side, it may need adjustment.

  • Tension Adjustment: If the belt slips, turn the rear roller bolts clockwise in small increments (1/4 turn at a time) on both sides until the slipping stops.
  • Centering Adjustment: If the belt drifts to the left, turn the left rear roller bolt clockwise in small increments. If it drifts to the right, turn the right rear roller bolt clockwise. Run the treadmill at a low speed to check alignment after each adjustment.
Treadmill running belt shock absorption system diagram

Image: Cross-section view of the treadmill's running surface, showing the multi-layer running deck, 2 silicone pads, and 6 shock absorbers for enhanced cushioning and knee protection. Running belt dimensions of 42.5 inches by 16.2 inches are indicated.

7. Troubleshooting

Problem Possible Cause Solution
Treadmill does not power on. Power cord not plugged in; power switch off; safety key not inserted. Check power cord connection; ensure power switch is ON; insert safety key fully.
Running belt slips or hesitates. Belt tension too loose; belt needs lubrication. Adjust belt tension (see Section 6.3); lubricate belt (see Section 6.2).
Unusual noise during operation. Loose components; belt friction; motor issue. Check for and tighten any loose bolts; lubricate belt; if noise persists, contact support.
Heart rate monitor not reading. Hands not properly placed; hands are dry. Ensure firm, full contact with both sensors; moisten hands slightly if too dry.

8. Specifications

ROBORE L20 Treadmill Specification Table

Image: Table summarizing the general, specification, and weight & size details of the ROBORE L20 Treadmill.

Category Detail
General
  • Brand: ROBORE
  • Type: Treadmill
  • Model: L20
  • Color: Black
Performance
  • Motor Power: 3.5HP (Brushless)
  • Operating Noise: <45dB
  • Max User Weight: 400lbs / 180kg
  • Speed Range: Up to 14 km/h (8.7 MPH)
  • Incline Adjustment: 10%-15% 2-level Manual Incline
Running Surface
  • Running Belt: Multi-layer; Non-slip Diamond Pattern
  • Running Belt Dimensions: 42.5" × 16.2" (107cm × 40cm)
  • Shock Absorption System: 2 Silicone Pads + 6 Shock Absorbers
Console & Features
  • Console: Touch Screen; 90° Flip Function
  • Heart Rate Monitoring: Yes (Handrail Sensors)
  • Programs: 12 Pre-set Programs
  • Foldable: Yes
  • Transport Wheels: Yes
Dimensions & Weight
  • Product Weight: 27kg (59.5 lbs)
  • Package Weight: 30.5kg (67.2 lbs)
  • Product Size (L x W x H): 128 × 60 × 106 cm (50.4" × 23.6" × 41.7")
  • Package Size (L x W x H): 133.5 × 66.5 × 15.5 cm (52.6" × 26.2" × 6.1")

9. User Tips

  • Maximize Calorie Burn: Utilize the manual incline feature. Even a slight incline can significantly increase calorie expenditure compared to a flat surface.
  • Quiet Operation: The treadmill's brushless motor operates below 45dB, making it ideal for use in apartments or shared living spaces without disturbing others.
  • Space-Saving: Remember to utilize the 90-degree screen flip and full folding capability to store the treadmill under a bed or against a wall when not in use. The transport wheels make this process effortless.
  • Stay Hydrated: Use the integrated cup holders to keep water or your favorite sports drink within reach during your workout.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer/manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.