1. Introduction
The Yieryi PH-W2823 WiFi Online PH EC Temp Meter is a smart water quality tester designed for precise monitoring in various applications such as aquariums, hydroponics, and soilless cultivation. This device connects to the Tuya Smart APP, allowing for real-time data transfer, historical data viewing, and customizable alarm settings. It accurately measures pH, Electrical Conductivity (EC), and Temperature, offering comprehensive insights into water parameters. The controller features replaceable electrodes, fuse protection, and supports multi-device control and data export for efficient management.

Figure 1: Yieryi WiFi Online PH EC Temp Meter with its components and mobile app interface.
2. Setup Guide
2.1 Unpacking and Components
Before starting, ensure all components are present in the package:
- 1 x Tuya Smart WIFI online PH EC Controller
- 3 packs of PH calibration powder (4.0, 6.86, 9.18)
- 1 x pH Electrode
- 1 x Temperature Electrode
- 2 x Suction Cup
- 4 x Screw
- 4 x Anchor Bolt
- 1 x User Manual (English)

Figure 2: All items included in the product package.
2.2 Physical Connection
- Connect the pH Electrode, EC Electrode, and Temperature Electrode to their respective ports on the main controller unit.
- Plug the main controller unit into a suitable power outlet (AC230V 50Hz for EU, AC120V 60Hz for US, or corresponding AU/UK plugs).
- If using the control output feature, connect external devices such as air stones, aerators, CO₂ regulators, or solenoid valves to the relay-output power socket. This allows the controller to manage these devices based on set pH/EC parameters.

Figure 3: Connection diagram for the EC/PH/Temp Controller in an aquarium setup, including external devices.
2.3 App Connection
- Download the 'Tuya Smart' application from your mobile device's app store (compatible with iOS and Android systems).
- Follow the in-app instructions to add your Yieryi WiFi Online PH EC Temp Meter. This typically involves putting the device into pairing mode (refer to the device's display or manual for specific instructions) and connecting it to your home WiFi network.
- Once connected, you can view current data, historical data, and manage settings directly from the app.

Figure 4: The device connected to a fish tank, demonstrating WiFi connectivity and real-time data transfer to the Tuya app.
3. Operating Instructions
3.1 Basic Measurement
To obtain readings, simply immerse the test electrodes (pH, EC, Temperature) into the water or solution you wish to measure. The device will display the readings on its screen within a few seconds. The device supports long-term online monitoring, providing continuous data.
3.2 Setting Control Range and Alarms
The controller allows you to set target pH/EC high/low values or ranges to automate connected devices and receive alarms. Follow these steps:
- Enter Setup Mode: Press and hold the 'SET' button on the device. The screen will flash, indicating that a parameter is ready for configuration. You can select between PH, EC, or TEMP.
- Select Parameter: Briefly press the 'SET' button to cycle through and select the parameter you wish to adjust (e.g., PH).
- Set Lower Limit: Use the Up/Down adjustment buttons to input your desired lower limit value for the selected parameter. Press 'SET' to confirm and save this value.
- Set Upper Limit: Continue using the Up/Down adjustment buttons to input the upper limit value for the same parameter. Press 'SET' again to confirm, completing the control range interval configuration.
- Configure Alarm Buffer (Optional): To set an alarm buffer (e.g., PH ±0.05PH), after confirming the upper and lower limits, briefly press an adjustment key to select the buffer value and press 'SET' to lock it.
- Exit Setup: After 5 seconds of inactivity, the device will automatically exit setup mode and return to the real-time monitoring interface. The newly configured control range settings will now be active.
When the measured pH or EC falls below the set lower limit, or exceeds the set upper limit, the device will activate or deactivate connected external equipment accordingly. For example, if the pH drops below the set minimum, a connected CO₂ regulator might turn off. Additionally, the Tuya Smart APP will send alarm notifications to your mobile device.

Figure 5: Screenshot of the Tuya app interface for setting high and low alarm values.
3.3 App Features
The Tuya Smart APP provides enhanced control and monitoring capabilities:
- Real-Time Monitoring: View current pH, EC, and Temperature readings instantly.
- Historical Data: Access daily, weekly, and monthly historical data for trend analysis.
- Alarm Notifications: Receive alerts on your mobile phone when abnormal high or low values are detected.
- Data Export: Export data to Excel or email for further analysis and sharing.
- Multi-Device Control: Manage multiple Yieryi devices from a single mobile application.

Figure 6: The device displaying real-time data, with the mobile app showing historical data trends over weeks, days, and months.
4. Maintenance
4.1 Electrode Care and Replacement
The device uses high-precision replaceable electrodes for pH, EC, and temperature. To ensure accurate and stable data, it is crucial to maintain the electrodes properly:
- Always keep the electrodes clean. Rinse them with distilled water after each use.
- Store pH electrodes in a suitable storage solution (or pH 4.0 buffer solution if storage solution is unavailable) when not in use to prevent drying out.
- Replace electrodes when they show signs of wear, damage, or consistently provide inaccurate readings despite calibration.

Figure 7: Detailed view of the high-precision EC, PH, and Temperature electrodes, along with the power plug.
4.2 Calibration
Regular calibration is essential for maintaining the accuracy of your meter. The device comes with pH calibration powders (4.0, 6.86, 9.18). For EC calibration, use a standard EC buffer solution.
EC Calibration Demonstration:
Video 1: Demonstration of EC calibration using buffer solutions.
Refer to the specific calibration instructions provided in the full user manual for detailed steps on pH and EC calibration.
5. Troubleshooting
If you encounter issues with your Yieryi WiFi Online PH EC Temp Meter, consider the following common problems and solutions:
- Inaccurate Readings: Ensure electrodes are clean and properly calibrated. Check if electrodes are damaged or worn out and replace if necessary.
- No Display/Power: Verify that the power plug is securely connected to a working power outlet. Check the fuse in the control socket for any damage and replace if blown.
- App Connectivity Issues: Ensure your device is within range of your WiFi router and that the WiFi network is stable. Restart both the meter and your router. Re-attempt the app connection process if needed.
- Alarms Not Triggering: Double-check your alarm settings in the device and the Tuya Smart APP to ensure the high/low limits are correctly configured.
- External Devices Not Activating: Confirm that the external device is properly plugged into the control socket and that its power is on. Verify that the control range settings are correctly configured on the meter.
For any persistent issues or discrepancies, please refer to the comprehensive user manual or contact customer service for assistance.
6. Specifications
| Feature | Detail |
|---|---|
| APP Support | Tuya Smart (iOS/Android Compatible) |
| Measuring Range (PH) | 0.00-14.00pH |
| Measuring Range (EC) | 0~19000μS/cm, 0~199.0mS/cm |
| Measuring Range (TEMP) | 0℃-50℃ (32°F-122°F) |
| Accuracy (PH) | ±0.1pH |
| Accuracy (EC) | ±2% F.S |
| Accuracy (TEMP) | ±1.0℃ |
| Resolution (PH) | 0.01pH |
| Resolution (EC) | 1μS/cm (<1000μS/cm), 10μS/cm (>1000μS/cm), 0.1mS/cm |
| Resolution (TEMP) | 0.1℃ (0.2°F) |
| Alarm Setting Range (PH) | 0.00-14.00pH |
| Alarm Setting Range (EC) | 0~20000μS/cm |
| Features | APP Alarm, Data Export, Multi-Device Control, Fuse Protection, Replaceable Electrodes |
| Material | ABS |
| Power Supply | AC230V 50Hz (EU); AC120V 60Hz (US) |
| Plug Type | AU/EU/US/UK (Optional) |
| Operating Temperature | 0~50℃ (32~122°F) |
| Sensor Line Length | 2M (6.56Ft) |
| Controller Size | 160×95×40Mm (Excluding Electrode Connector) |
| Control Socket Size | 130×65×53Mm (Including Fuse) |
| Item Weight | 872G (1.92Lb) |
| Package Weight | 1075G (2.37Lb) |
| Package Size | 32×20.5×7.6Cm |

Figure 8: Dimensions of the controller and the control socket.
7. User Tips
- For optimal plant growth in hydroponics, regularly monitor and adjust nutrient solution pH/EC values based on plant requirements.
- In aquariums, maintaining stable water parameters is crucial for the health of fish and shrimp. Use the alarm feature to be notified of any significant deviations.
- When assessing water quality in laboratories or purification systems, ensure electrodes are freshly calibrated for the most accurate results.
- The device's ability to manage multiple devices from a single mobile app can simplify complex setups, allowing for centralized control.
- Always refer to the full user manual for specific operational details and troubleshooting steps.
8. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact Yieryi customer service. Keep your purchase receipt or order details handy when seeking support.