Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE Android Car Radio. Please read this manual thoroughly before using the device to ensure proper functionality and safety. This unit is designed for Kia Ceed and Venga models manufactured between 2010 and 2016.
Figure 1: MEKEDE Android Car Radio Main Unit
Compatibility Notes
Ensure your vehicle's dashboard matches the compatible configuration shown below. Incorrect dashboard types may prevent proper installation.
Figure 2: Dashboard Compatibility for Kia Ceed
Setup and Installation
Professional installation is highly recommended to avoid damage to the device or your vehicle. Incorrect installation may void your warranty.
Package Contents
Verify that all items are present in the package:
Figure 3: Included Package Contents
- Main Unit
- Power Cable
- RCA Cable
- Reversing Camera (Optional, check your order)
- GPS Antenna
- USB Cable (x2)
- Microphone (MIC)
- Radio Antenna Adapter
Wiring Connections
Refer to the following diagrams for correct wiring. Ensure all connections are secure before powering on the unit.
Figure 4: Accessory Wiring Diagram
Figure 5: Back Panel Connections of the Host Device
Important Note:
Figure 6: Decorative Slots Warning
The GPS and AUX positions on the front of the unit are decorative only and do not contain functional SD GPS card slots.
Operating Instructions
Main Interface and Navigation
The unit features an intuitive Android interface. Navigate through applications using the touchscreen. The main menu provides quick access to essential functions.
Figure 7: Main Menu and Theme Interfaces
Bluetooth Function (BT)
The built-in smart Bluetooth system supports mobile phone pairing for hands-free calling and BT music streaming. You can sync contacts and view call records.
- Access the BT function from the main menu.
- Enable Bluetooth on your mobile device and search for the car radio.
- Pair your device.
Figure 8: Bluetooth Interface
CarPlay and Android Auto
The unit supports both Wireless CarPlay (for iOS devices) and Wireless Android Auto (for Android devices) via Bluetooth and the 'Zlink' application.
Connection Steps:
- Connect your phone via Bluetooth to the car radio.
- Open the 'Zlink' application on the car radio.
- Wait for the connection to establish.
CarPlay and Android Auto can also be connected via USB cable.
Figure 9: CarPlay and Android Auto Connection
GPS Navigation
The unit features a built-in global positioning system with omni-directional map display and real-time traffic conditions. It supports various navigation applications.
Figure 10: GPS Navigation Interface
FM RDS Radio
The radio supports both automatic and manual station search. You can customize your channel list by dragging station icons.
Figure 11: FM RDS Radio Interface
Note: DAB+ functionality requires an optional external module (not included).
Multimedia Playback (USB)
The unit supports dual USB connections for playing music, movies, and viewing photos from Android multimedia players.
Figure 12: Dual USB Support
The 1080P video decoder with True Color 24 HD display ensures smooth playback of high-quality videos.
Figure 13: 1080P Video Playback
Steering Wheel Control (SWC)
The unit supports digital steering wheel controls, allowing you to manage music and hands-free calling for safer driving.
Figure 14: Steering Wheel Control Setup
Play Store and Applications
Access the Play Store to download and install various applications such as YouTube, VK, Twitter, Skype, Facebook, Messenger, LinkedIn, Navitel, IGO Navigation, Spotify, Yandex, Yandex Map, Waze, Netflix, and Instagram.
Figure 15: Play Store Interface
Optional Features (Not Included)
- OBD II Support: Monitor real-time car data and retrieve fault codes. An external OBD II device is required.
- TPMS Support: Monitor tire pressure and temperature. An external TPMS sensor kit is required.
- AHD Reversing Video: Provides clearer rearview video. An AHD rearview camera is required.
- ADAS DVR Anti-collision Warning: Features front vehicle distance prediction, anti-collision warning, and lane departure warning. An ADAS DVR is required.
Maintenance
To ensure the longevity and optimal performance of your car radio, follow these general maintenance guidelines:
- Keep the screen clean using a soft, lint-free cloth. Avoid abrasive cleaners.
- Do not expose the unit to extreme temperatures or direct sunlight for prolonged periods.
- Ensure all cables are securely connected and free from damage.
- Regularly update the firmware and software when new versions are released by MEKEDE for improved performance and features.
Troubleshooting
If you encounter any issues, please refer to the solutions below. If the problem persists, contact customer support.
Rear-View Camera Not Working
If your rear-view camera is not displaying an image or is not functioning correctly, you may need to adjust the camera type in the factory settings.
- Go to the unit's settings menu.
- Locate and select "Factory Setup".
- Enter the password: 1234.
- In the factory settings, find the option to select the camera type and choose the appropriate setting for your installed camera.
- After selecting, reset the radio for changes to take effect.
Figure 16: Rear-View Camera Troubleshooting Steps
Specifications
| Feature | Specification |
|---|---|
| Brand Name | MEKEDE |
| Operating System | Android 15 |
| CPU | 4-Core Processor |
| RAM | 2 GB |
| ROM | 64 GB |
| Display Size | 7 inches |
| Resolution | 1024*600 (IPS) |
| Touch Screen | Yes |
| Built-in Screen | Yes |
| CarPlay | Wireless Support |
| Android Auto | Wireless Support |
| GPS | Built-in Support |
| Wi-Fi Function | Support |
| Steering Wheel Control | Support |
| Bluetooth Function | Support |
| Tuner Type | FM |
| Out Power | 4*45W |
| Voltage | 12 V |
| Item Weight | 1.2 kg |
| Item Size | 7 inch (195mm x 113mm) |
| Max External Memory | 64 GB |
| Digital Media Format | Mp3, MP4, WMA, JPEG |
| OSD Language | Multi-language support (Chinese, Arabic, German, Russian, French, Korean, Dutch, Japanese, English, etc.) |
| Certification | CE |
| Material | Plastic Hardware |
Figure 17: Key Specifications Overview
Warranty and Support
Your MEKEDE car radio comes with a 1-year factory warranty (accessories not included). We strive for 100% customer satisfaction.
Warranty Terms:
- 1-Year Factory Warranty: Covers the main unit for one year from the date of receipt.
- 365 Days Free Replacement: If the product has a problem within 365 days of receipt, you may be eligible for a free replacement. Please contact us to communicate the issue.
- Extended Warranty: The warranty can be extended to 2 years if you provide a 5-star review and share installation photos.
Figure 18: 365 Days Free Replacement Process
For any issues or inquiries, please contact MEKEDE Official Store customer service.
User Tips
- Professional Installation: Always consider professional installation to prevent damage to the device and ensure correct wiring.
- Firmware Updates: Regularly check for and install firmware updates provided by MEKEDE to enhance performance and access new features.
- Camera Setup: If your rear-view camera isn't working, remember the factory settings password is '1234' to configure the camera type.