1. Introduction
Thank you for choosing the Joyroom JR-ZS530 Car Phone Mount Holder. This universal dashboard mount is designed to provide a secure and convenient way to hold your smartphone while driving. Featuring a 360° rotatable base and 30° vertical adjustment, it ensures optimal viewing angles and reduces glare. Its robust gel and suction cup 2-in-1 base offers strong adhesion on various smooth surfaces. Please read this manual carefully to ensure proper installation and use.
2. Key Features
- 360° Rotation & 30° Vertical Tilt: Allows for flexible positioning to achieve the clearest and most comfortable viewing angle, effectively preventing glare.
- Extra-Wide Spring Clip: Securely holds devices from 7mm to 19mm thickness, accommodating most smartphones, even with protective cases (e.g., OtterBox, MagSafe, Battery Case, Fold Series when folded).
- Versatile 2-in-1 Gel Suction Cup Base: Provides strong, reliable adhesion on car dashboards and other smooth indoor surfaces (desks, countertops, tiles) without leaving marks.
- Quick One-Hand Operation: Designed for easy and intuitive phone insertion and release, promoting worry-free driving.
- Sturdy & Vibration-Resistant Construction: Soft silicone lining and a durable suction base protect your device and prevent wobbling, ensuring stability on bumpy roads.
- Cable Clip: Integrated design for fixed data cable management.
3. Specifications
| Attribute | Value |
|---|---|
| Model Number | JR-ZS530 |
| Brand Name | Joyroom |
| Material | ABS+PC, Plastic, Silicone |
| Applicable Phone Size | 4.7-7 inches (7-19mm thickness) |
| Charger | No |
| Color | Black |
| Dimensions (approx.) | 3.2 inches (width) x 2.2 inches (height) |
4. Package Contents
Upon opening the package, you should find the following items:
- Joyroom JR-ZS530 Car Phone Mount Holder
- User Manual

5. Installation & Setup
Follow these steps for optimal installation of your car phone mount:
- Choose a Suitable Surface: The mount is designed for smooth and flat surfaces. Avoid rough or curved surfaces, leather, textile, or areas with dirt/grease.
- Clean the Surface: Thoroughly clean the chosen installation area on your dashboard with a damp cloth and dry it completely. This ensures maximum adhesion.
- Position the Mount: Place the mount on the cleaned, flat surface.
- Press and Lock: Press the base firmly onto the surface. While pressing, rotate the bearing (the outer ring of the base) towards the 'Tighten' direction until it is securely locked. This activates the vacuum suction.
- Wait: For best results, wait for 5 minutes after installation before mounting your phone.


6. Operating Instructions
6.1 Mounting Your Phone
Gently open the spring clip and place your phone into the mount. The silicone-lined clips will securely hold your device without scratching it. The mount accommodates phones with a thickness of 7-19mm.

6.2 Adjusting the Viewing Angle
- 360° Rotation: The base of the mount can be rotated 360 degrees to switch between portrait and landscape orientations or to adjust the horizontal viewing angle.
- 30° Vertical Adjustment: The phone holder section can be tilted vertically by up to 30 degrees. This allows you to adjust the screen angle to reduce sun glare and match your eye level for comfortable viewing.

6.3 One-Handed Operation
The design allows for easy one-handed placement and removal of your phone, ensuring minimal distraction while driving.
7. Maintenance
- Cleaning the Suction Cup: If the suction cup loses its stickiness, rinse it with warm water and let it air dry. The gel layer is washable and reusable.
- General Cleaning: Wipe the mount with a soft, damp cloth to remove dust and grime. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use for extended periods, detach the mount and store it in a cool, dry place away from direct sunlight.

8. Troubleshooting
- Mount not sticking: Ensure the surface is clean, dry, and flat. Re-clean the surface and the suction cup (as per maintenance instructions) and re-apply, rotating firmly to 'Tighten'.
- Phone wobbles: Ensure the spring clip is fully engaged with your phone. Check that the mount is securely attached to the dashboard.
- Difficulty rotating/adjusting: Ensure no debris is obstructing the moving parts. Apply gentle force; do not force adjustments.
9. User Tips
- Surface Preparation is Key: Several users highlight that proper cleaning of the dashboard surface is crucial for the mount's strong adhesion. A clean, flat surface ensures the best grip.
- Secure Fit: The rotating ring on the base is important for adjusting suction strength. Make sure to rotate it to the 'Tighten' position for a secure hold.
- Quality Build: Users appreciate the high-quality materials and sturdy construction, noting that the phone is held securely without wobbling.
10. Warranty & Support
For any warranty claims or technical support, please refer to the official Joyroom website or contact your retailer. Keep your purchase receipt as proof of purchase.