1. Introduction
Thank you for choosing the Dyness DL5.0C-1C Lithium Battery. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your battery system. The DL5.0C-1C is a high-performance LiFePO4 battery designed for residential and small commercial energy storage applications, offering reliable power with a long lifespan and flexible expansion capabilities.
2. Safety Information
Please read and understand all safety instructions before installing or operating the battery. Failure to follow these instructions may result in electric shock, fire, serious injury, or property damage.
- Always wear appropriate personal protective equipment (PPE) during installation and maintenance.
- Do not disassemble, modify, or attempt to repair the battery. Contact qualified personnel for service.
- Keep the battery away from open flames, heat sources, and flammable materials.
- Ensure proper ventilation around the battery to prevent overheating.
- Do not expose the battery to water or other liquids.
- Handle the battery with care; avoid dropping or subjecting it to severe impacts.
- Ensure all electrical connections are secure and correctly polarized.
- Keep out of reach of children.
3. Package Contents
Upon unpacking, please verify that all components are present and undamaged. If any items are missing or damaged, contact your supplier immediately.
- Dyness DL5.0C-1C Lithium Battery Module
- User Manual (this document)
- Mounting accessories (may vary based on installation type)

Figure 3.1: Typical packaging of Dyness battery units.
4. Product Overview
4.1. Key Features
The Dyness DL5.0C-1C battery offers advanced features for reliable energy storage:
- Flexible Expansion: Scalable from 5.12 kWh up to 256 kWh (max. 50 modules in parallel).
- 1C Discharge Rate: Capable of supplying power to multiple loads without worrying about power outages.
- Automatic Self-heating: Operates efficiently in a wide temperature range (-20°C to 55°C).
- Easy Installation: Supports wall-mounted, floor-mounted, and standard rack-mounted installations for optimal space utilization.
- Long-term Reliability: Utilizes LFP cells with 6000+ cycles and comes with a 10-year warranty.
- All-round Safety: Features short-circuit lockout, surge-resistant design, and is safe and reliable.

Figure 4.1: Dyness DL5.0C Key Features.
4.2. Components and Indicators
The front panel of the Dyness DL5.0C-1C battery module includes essential controls and indicators:
- ON/OFF Switch: Main power control for the battery module.
- LED Indicators: Display battery status, charge level, and operational modes.
- Communication Ports: CAN, RS485, and RS232 ports for system integration and monitoring.
- Positive (+) and Negative (-) Terminals: For connecting to the inverter or other system components.

Figure 4.2: Front view of the Dyness DL5.0C-1C Battery Module.
5. Specifications
The following table details the technical specifications of the Dyness DL5.0C-1C Lithium Battery:
| Parameter | Value |
|---|---|
| Model | DL5.0C-1C |
| Battery Type | LiFePO4 |
| Nominal Energy | 5.12 kWh |
| Nominal Capacity | 100Ah |
| Nominal Voltage | 51.2V |
| Operating Voltage | 44.8-57.6V |
| Recommended Charge & Discharge C Rate | 0.5C |
| Maximum Discharge Crate | 1C |
| Recommended Charge/Discharge Current | 50A |
| Max. Charge/Discharge Current | Charge 75A / Discharge 100A |
| Peak Discharge Current | 110A (15s) |
| Depth of Discharge (DOD) | 90% |
| Net Weight | 54kg |
| Dimension (W/D/H) | 558*545*150mm |
| Charging Temp. Range | 0~55°C (-20~55°C with heating function) |
| Discharging Temp. Range | -20~55°C |
| Communication | CAN/RS485/RS232 |
| Cycle Life | ≥6000 Cycles |
| Protection Level | IP20 |
| WiFi Module | Optional |
| Expansion | Up to 50 units in parallel |
| Certification & Safety Standard | UN38.3/CE-EMC/IEC62619/CEI-021/GOST-R |
| Compatible Inverters | SMA/Schneider/Victron energy/Ingeteam/Solis/GoodWe/Growatt/Soplanet/Luxpower/DEYE etc. |

Figure 5.1: Detailed Technical Specifications.

Figure 5.2: Battery Dimensions.
6. Setup and Installation
Installation should only be performed by qualified and certified personnel. Ensure all local electrical codes and standards are followed.
6.1. Site Selection
- Install the battery in a cool, dry, and well-ventilated area.
- Avoid direct sunlight, heat sources, and moisture.
- Ensure the installation surface is strong enough to support the battery's weight (54kg).
- Maintain adequate clearance around the battery for ventilation and maintenance.
6.2. Mounting Options
The Dyness DL5.0C-1C supports various installation methods:
- Wall-mounted: Securely attach the battery to a sturdy wall using appropriate brackets.
- Floor-mounted: Place the battery on a stable, level surface.
- Rack-mounted: Integrate the battery into a standard equipment rack.
6.3. Electrical Connections
- Ensure the battery and inverter are turned OFF before making any connections.
- Connect the positive (+) terminal of the battery to the positive input of the inverter.
- Connect the negative (-) terminal of the battery to the negative input of the inverter.
- Connect communication cables (CAN/RS485/RS232) between the battery and the inverter/monitoring system as per the inverter's manual.
- For parallel connections, ensure all batteries are of the same model and capacity. Connect them according to the manufacturer's guidelines for parallel operation, ensuring proper communication and balancing. Up to 50 units can be connected in parallel.

Figure 6.1: Dyness battery installed in a home energy system.
7. Operating Instructions
7.1. Initial Startup
- After all electrical connections are made and verified, turn ON the main power switch on the battery module.
- Observe the LED indicators for normal operation. Refer to the LED status guide (if provided separately) for specific indications.
- Turn ON the inverter and other system components according to their respective manuals.
7.2. System Operation
The Dyness DL5.0C-1C battery integrates seamlessly into your energy system to:
- Store Solar Energy: Charges from solar panels via an inverter during the day.
- Supply Power: Provides power to your electrical loads at night or during grid outages.
- Grid Interaction: Can be configured to sell excess power back to the grid (if supported by your inverter and local regulations).
- EV Charging: Can support charging electric vehicles when integrated into a compatible home energy management system.
7.3. App Monitoring
The Dyness system supports mobile application monitoring for convenient management:
- Remote Upgrade: Update firmware remotely for improved performance and features.
- System Monitoring: View real-time data on battery status, charge/discharge currents, voltage, temperature, and more.
- Status Check: Check the battery status in real-time from your smartphone or tablet.
Video 7.1: Dyness product animation demonstrating app monitoring, solar energy storage, grid interaction, and EV charging.
8. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your Dyness battery.
- Cleaning: Keep the battery module clean and free from dust and debris. Use a dry, soft cloth for cleaning.
- Connection Check: Periodically inspect all electrical connections for tightness and corrosion. Tighten any loose connections.
- Environmental Conditions: Ensure the battery operates within its specified temperature range (-20°C to 55°C for discharge, 0°C to 55°C for charge).
- Ventilation: Ensure that ventilation openings are not blocked.
- Visual Inspection: Check for any signs of physical damage, swelling, or leakage. If any issues are observed, contact support immediately.
9. Troubleshooting
If you encounter issues with your Dyness DL5.0C-1C battery, refer to the following basic troubleshooting steps. For complex problems, contact technical support.
- Battery Not Powering On: Check the ON/OFF switch, ensure it is in the 'ON' position. Verify all power cables are securely connected.
- No Output Power: Check connections to the inverter. Ensure the inverter is operational and correctly configured. Check battery LED indicators for fault codes.
- Unusual Noises or Smells: Immediately turn off the battery and inverter. Disconnect power and contact technical support.
- App Monitoring Issues: Ensure the communication cables are properly connected. Check your network connection and app settings.
10. User Tips
No specific user tips were available from customer reviews or Q&A for this product at the time of manual creation.
11. Warranty and Support
The Dyness DL5.0C-1C battery typically comes with a 10-year warranty. For detailed warranty terms, conditions, and to initiate a warranty claim, please refer to your purchase agreement or contact your authorized Dyness dealer or the seller directly. For technical support, installation assistance, or troubleshooting beyond the scope of this manual, please contact your supplier or Dyness customer service.