1. Introduction
The EstarDyn VEML7700 is a high-precision digital ambient light sensor designed to accurately measure light intensity (illuminance) in various environments. Utilizing advanced Filtrton™ and O-Trim™ technologies, it mimics the human eye's spectral response and provides reliable readings up to 120 klx with a resolution of 0.0036 lx/ct. This module features a convenient I2C (IIC) bus interface, making it easy to integrate with microcontrollers like Arduino and Raspberry Pi.
The module supports a supply voltage range of 3.3V to 5V, offering flexibility for different project requirements. Its low power consumption and shutdown mode make it suitable for energy-efficient applications.

2. Specifications
| Feature | Description |
|---|---|
| Model | VEML7700 |
| Sensor Type | Digital Ambient Light Sensor (Optical-Electronics Sensor) |
| Theory | Optical Sensor |
| Output Type | Analog Sensor (I2C digital output) |
| Interface | I2C (IIC) Bus Interface, Gravity I2C interface |
| Supply Voltage (VIN/Logic) | 3.3V - 5V |
| Operating Current | 45µA |
| Shutdown Mode Current | 0.5µA |
| Measurement Range | 0 - 120 klx (0 - 167 klx compared to BH1750's 0-65 klx) |
| Precision | 0.005 lx/ct |
| Accuracy | 0.0036 lx/ct |
| Operating Temperature | -25°C to +85°C |
| Module Dimensions | 16.5 mm x 16.5 mm |
| Material | Polymer |
| Use | Ray Sensor |
Reference Luminance Data:
- Night: 0.001-0.02 lx
- Moonlit night: 0.02-0.3 lx
- Cloudy indoor: 5-50 lx
- Cloudy outdoor: 50-500 lx
- Sunny indoor: 100-1000 lx
- Summer midday sunlight: approximately 10^5-6 lx
- Reading lighting: 50-60 lx
- Home video standard lighting: 1400 lx
3. Setup
3.1 Package Contents
- EstarDyn VEML7700 Ambient Light Sensor Module
- Pin headers (if included with your specific purchase)
3.2 Pinout Description
The VEML7700 module typically has the following pins:
- VIN: Power supply input (3.3V - 5V)
- GND: Ground
- SDA: I2C Serial Data Line
- SCL: I2C Serial Clock Line
- 3V0: 3.3V output (if present, for powering other low-voltage components)


3.3 Wiring Instructions (Example for Arduino/Raspberry Pi)
The VEML7700 communicates via the I2C protocol, which requires only two data lines (SDA and SCL) in addition to power and ground. This "Gravity I2C interface" simplifies wiring.
- Connect the VIN pin of the VEML7700 module to the 3.3V or 5V power supply pin of your microcontroller (e.g., Arduino's 5V or 3.3V, Raspberry Pi's 3.3V or 5V). Ensure the voltage matches your microcontroller's logic level.
- Connect the GND pin of the VEML7700 module to the Ground (GND) pin of your microcontroller.
- Connect the SDA pin of the VEML7700 module to the SDA pin of your microcontroller. (For Arduino Uno, this is A4; for Arduino Mega, it's 20; for Raspberry Pi, it's GPIO2).
- Connect the SCL pin of the VEML7700 module to the SCL pin of your microcontroller. (For Arduino Uno, this is A5; for Arduino Mega, it's 21; for Raspberry Pi, it's GPIO3).
No external pull-up resistors are typically needed as most VEML7700 modules and microcontrollers have internal pull-ups for I2C lines.
4. Operating Instructions
4.1 Software Setup
To use the VEML7700 sensor, you will need to install a compatible library for your chosen microcontroller platform. For Arduino, search for "VEML7700" in the Library Manager (e.g., Adafruit VEML7700 Library). For Raspberry Pi, you may use Python libraries like smbus or specific VEML7700 libraries.
4.2 Basic Operation
After wiring and installing the necessary library, you can begin reading ambient light data:
- Initialization: In your code, initialize the I2C communication and the VEML7700 sensor. This usually involves calling a
begin()function from the library. - Reading Lux Values: Use the library's functions to read the current ambient light level in Lux (lx). The sensor provides raw data which the library converts into human-readable Lux values.
- Configuration: The VEML7700 offers various configuration options, such as gain settings and integration time, to optimize performance for different lighting conditions and desired accuracy. Refer to the specific library documentation for details on how to adjust these settings.
- Low Power Mode: The sensor supports a shutdown mode (0.5µA) for ultra-low power consumption. This can be activated and deactivated via software commands provided by the library.
The sensor's wide measurement range (0-120 klx) and high accuracy (0.0036 lx/ct) ensure precise readings across a broad spectrum of light conditions, from very dim to bright sunlight.
5. Maintenance
The VEML7700 Ambient Light Sensor Module is a robust electronic component designed for long-term operation with minimal maintenance. To ensure optimal performance and longevity:
- Keep Clean: Ensure the sensor's optical window is free from dust, dirt, or obstructions. Use a soft, dry cloth or a gentle air blower to clean if necessary. Avoid abrasive materials or harsh chemicals.
- Environmental Protection: While the sensor operates within a wide temperature range (-25°C to +85°C), protect it from extreme moisture, direct water exposure, and corrosive environments unless housed in an appropriate enclosure.
- Physical Handling: Handle the module with care to avoid physical damage to the PCB or components. Avoid bending or excessive force on the pins.
6. Troubleshooting
If you encounter issues with your VEML7700 module, consider the following troubleshooting steps:
- No Readings / I2C Communication Error:
- Check Wiring: Double-check all connections (VIN, GND, SDA, SCL) to ensure they are correct and secure.
- Power Supply: Verify that the module is receiving the correct voltage (3.3V-5V) and that the power supply is stable.
- I2C Address: Confirm the I2C address used in your code matches the sensor's default address (typically 0x10 for VEML7700). Use an I2C scanner sketch/script to detect connected devices.
- Library Installation: Ensure the correct library is installed and properly included in your code.
- Microcontroller I2C: Test your microcontroller's I2C bus with another known-working I2C device to rule out microcontroller issues.
- Inaccurate Readings:
- Ambient Light: Ensure the sensor is not obstructed and is exposed to the actual ambient light you wish to measure.
- Sensor Orientation: The sensor's optical window should face the light source.
- Configuration Settings: Review the sensor's gain and integration time settings in your code. Incorrect settings can lead to saturation in bright light or poor sensitivity in dim light.
- Environmental Factors: Extreme temperatures or humidity can sometimes affect sensor performance.
- Module Not Powering On:
- Voltage Check: Measure the voltage across VIN and GND pins.
- Polarity: Ensure power connections are not reversed.
7. User Tips
- Start Simple: Begin with basic example code provided by the library to confirm the sensor is working before integrating it into a complex project.
- I2C Scanner: Always use an I2C scanner sketch (for Arduino) or script (for Raspberry Pi) to verify the sensor's address if you're having communication issues.
- Power Considerations: While the module supports 3.3V-5V, ensure your microcontroller's logic levels are compatible. Most modern microcontrollers are 3.3V, but Arduino Uno is 5V. The VEML7700 is flexible.
- Environmental Shielding: For outdoor or harsh environments, consider enclosing the module in a waterproof and dustproof casing to protect it.
- Data Logging: Implement data logging to monitor light levels over time, which can be useful for automation projects or environmental studies.
Note: No specific user reviews or Q&A were provided for this product, so these tips are general recommendations for I2C ambient light sensors.
8. Warranty and Support
For specific warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer, EstarDyn, at the time of purchase. Typically, electronic modules come with a limited warranty against manufacturing defects.
For technical support, programming examples, and community forums, please consult the extensive online resources available for Arduino, Raspberry Pi, and the VEML7700 sensor. Many libraries and tutorials are freely available to assist with integration and project development.