AnyTone BP-03

Contents

Anytone BP-03 Bluetooth Wireless PTT Instruction Manual

Model: BP-03

1. Product Overview

The Anytone BP-03 is a compact Bluetooth Wireless Push-To-Talk (PTT) button designed to enhance the operation of compatible Anytone walkie-talkies, including the AT-D878UVII Plus, AT-D578UV Plus, and AT-D578UVII Plus models. It provides a convenient, hands-free method for initiating transmissions, featuring Type-C charging and a long-lasting rechargeable battery.

Anytone BP-03 Wireless PTT button, top view
Figure 1: Top view of the Anytone BP-03 Wireless PTT button.

2. Package Contents

Ensure all items are present in the package:

  • 1 × Wireless PTT Button (BP-03)
  • 1 × Type-C Charging Cable
  • 1 × Velcro Strap
Anytone BP-03 Wireless PTT button with Velcro strap
Figure 2: Anytone BP-03 Wireless PTT button with the included Velcro strap.

3. Setup Guide

3.1 Charging the PTT Button

  1. Locate the Type-C charging port on the side of the BP-03 PTT button.
  2. Connect the provided Type-C charging cable to the PTT button.
  3. Connect the other end of the charging cable to a DC 5V power source (e.g., a USB wall adapter, computer USB port).
  4. The device will fully charge in approximately 1.5 hours. A full charge provides over 24 hours of working time.
Anytone BP-03 Wireless PTT button showing Type-C charging port and included charging cable
Figure 3: BP-03 PTT button connected to its Type-C charging cable.

3.2 Pairing with Your Anytone Radio

The BP-03 PTT button uses Bluetooth version 4.2 for wireless connection.

  1. Ensure your Anytone radio (e.g., AT-D878UVII Plus, AT-D578UV Plus, AT-D578UVII Plus) has its Bluetooth function enabled. Refer to your radio's manual for specific instructions on enabling Bluetooth.
  2. On your Anytone radio, navigate to the Bluetooth settings menu and select the "BT Pairing" option. This will put the radio in discovery mode.
  3. Turn on the BP-03 Wireless PTT button.
  4. The radio should detect the BP-03 PTT button. Select it from the list of available Bluetooth devices on your radio's display to initiate pairing.
  5. Once paired, the radio's display should indicate a successful connection, and the PTT button's indicator light (if present) may change.
Anytone BP-03 Wireless PTT button in use, with a radio display showing Bluetooth pairing options
Figure 4: Anytone radio display showing Bluetooth pairing options, ready to connect with the BP-03 PTT.

3.3 Attaching the PTT Button

The BP-03 PTT button can be conveniently worn using the included Velcro strap.

  1. Thread the Velcro strap through the loops on the BP-03 PTT button.
  2. Secure the PTT button to your finger, wrist, or other desired location using the Velcro strap for easy access during operation.
Anytone BP-03 Wireless PTT button worn on a finger with a Velcro strap, alongside a walkie-talkie
Figure 5: BP-03 PTT button worn on a finger for convenient access.

4. Operating Instructions

Once the BP-03 PTT button is successfully paired with your Anytone radio, operating it is straightforward:

  • To transmit, press and hold the large "PTT" button on the device.
  • Release the "PTT" button to stop transmitting and return to receive mode.

Note: The PTT button is designed for simple push-to-talk functionality. All other radio operations (channel selection, volume, etc.) are controlled directly on your Anytone radio.

5. Maintenance

5.1 Charging

Recharge the BP-03 PTT button when the battery indicator (if present) shows low power or when performance degrades. Use only the provided Type-C cable and a DC 5V power source.

5.2 Cleaning

Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Avoid exposing the device to excessive moisture.

5.3 Storage

Store the PTT button in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

6. Troubleshooting

  • PTT button not pairing with radio:
    • Ensure the BP-03 PTT button is charged.
    • Verify that Bluetooth is enabled on your Anytone radio and it is in pairing mode.
    • Make sure the PTT button is within range of the radio (typically up to 10 meters).
    • Try restarting both the PTT button and the radio, then attempt pairing again.
  • PTT button not transmitting:
    • Confirm that the BP-03 PTT button is successfully paired and connected to your radio.
    • Check the radio's settings to ensure it is configured to accept external PTT commands via Bluetooth.
    • Ensure the radio is powered on and functioning correctly.
  • Short battery life:
    • Ensure the device is fully charged before use (1.5 hours charging time).
    • Battery performance may degrade over time with repeated charging cycles.

7. Specifications

FeatureSpecification
ModelBP-03
Input VoltageDC 5V
Battery Capacity200mAh (Rechargeable)
Charging PortType-C
Bluetooth Version4.2
Charging TimeApprox. 1.5 hours
Working TimeOver 24 hours
Net Weight16g
Gross Weight59g
Dimensions (L x W x H)45mm x 36mm x 15mm
Anytone BP-03 Wireless PTT button, bottom view with model and battery information
Figure 6: Bottom view of the BP-03 PTT button showing model and battery specifications.
Anytone BP-03 Wireless PTT button with dimensions
Figure 7: Dimensions of the Anytone BP-03 Wireless PTT button.

8. User Tips

Based on general usage patterns for similar devices:

  • Optimal Placement: Experiment with different attachment points (finger, wrist, handlebar) using the Velcro strap to find the most comfortable and accessible position for your operating style.
  • Pre-Charge for Long Use: Always ensure the PTT button is fully charged before extended use to maximize its over 24-hour working time.
  • Bluetooth Range: While Bluetooth 4.2 offers a decent range, keep the PTT button relatively close to your radio for the most stable connection, especially in environments with potential interference.

No specific user tips were available from buyer reviews or Q&A for this product at the time of manual creation.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the official Anytone customer service. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.