Flytec V066-21

Contents

Flytec V066-21 GPS Module Instruction Manual

Model: V066-21 | Brand: Flytec

1. Introduction

This manual provides detailed instructions for the Flytec V066-21 GPS Module, a crucial spare part for the Flytec V066 GPS 12V Brushless Power RC Carp Fishing Bait Boat. The GPS module is designed to enhance the boat's navigation, positioning, and automated control features, ensuring a more efficient and precise fishing experience. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Safety Information

  • Always handle electronic components with care to avoid damage from static electricity or physical impact.
  • Ensure the bait boat is powered off and disconnected from its battery before installing or removing the GPS module.
  • Keep the GPS module and its components dry. Water ingress can cause malfunction or permanent damage.
  • Do not attempt to modify the GPS module or its wiring, as this may void the warranty and cause damage.
  • Store the module in a cool, dry place away from direct sunlight and extreme temperatures.

3. Package Contents

Verify that all items are present and in good condition upon opening the package:

  • GPS Module (V066-21) x 1
  • GPS Module Ribbon Cable x 1
  • Shielding Paper x 1
Flytec V066-21 GPS Module with ribbon cable and shielding paper
Flytec V066-21 GPS Module with ribbon cable and shielding paper, showing item number, item type, net weight (12g), and dimensions (2.1*2.4*0.8cm).

4. Specifications

FeatureDetail
Model NumberV066-21
Item TypeGPS Module
CompatibilityFlytec V066 GPS 12V Brushless Power RC Carp Fishing Bait Boat
Size2.4 x 2.1 x 0.8 cm
Weight12g
MaterialComposite Material
CertificationCE
Positioning SystemBeidou Dual-mode Positioning System
Close-up view of the Flytec V066-21 GPS Module
Close-up view of the Flytec V066-21 GPS Module, highlighting its compact size and connection interface.

5. Setup and Installation

This GPS module is a spare part for the Flytec V066 GPS Bait Boat. Installation typically involves replacing an existing module or adding it to a compatible boat. Always refer to your Flytec V066 bait boat's main instruction manual for specific disassembly and reassembly steps.

  1. Power Off: Ensure the bait boat is completely powered off and its battery is disconnected before beginning installation.
  2. Access Module Compartment: Carefully open the designated compartment on your Flytec V066 bait boat where the GPS module is located or intended to be installed. This may require unscrewing covers.
  3. Disconnect Old Module (if applicable): If replacing an old module, gently disconnect its ribbon cable from the main board.
  4. Connect New Module: Connect the provided GPS Module Ribbon Cable to the new V066-21 GPS Module. Ensure the connection is firm and correctly oriented.
  5. Install Module: Place the new GPS module into its designated slot within the boat.
  6. Apply Shielding Paper: Position the shielding paper over the GPS module as indicated in your boat's main manual. This helps prevent interference.
  7. Secure Connections: Connect the other end of the ribbon cable to the main board of the bait boat.
  8. Close Compartment: Carefully close and secure the module compartment, ensuring all screws are tightened and seals are properly seated to maintain waterproofing.
  9. Power On: Reconnect the boat's battery and power it on to test the new GPS module.

6. Operating the GPS Module (via Flytec V066 Bait Boat)

The V066-21 GPS Module enables advanced navigation features on your Flytec V066 bait boat. All operations are performed via the boat's remote control.

6.1. GPS Signal Acquisition

Upon powering on the boat, the GPS module will automatically search for satellite signals. Ensure the boat is in an open area with a clear view of the sky for optimal signal acquisition. The remote control's screen will display the satellite number and signal strength.

6.2. Setting Anchor Points and Fishing Grounds

  • Electronic Anchor Point: You can set the boat's current location or a fixed point as an electronic anchor. The boat will automatically monitor its position and return to and hold this original position if any deviation occurs, effectively resisting water flow and wind interference for precise baiting.
  • Fishing Grounds: The system allows setting up to 4 fishing grounds (A, B, C, D) and 200 anchor points (01-10 for each ground) to meet diverse fishing needs.

6.3. Cruise Control

After sailing straight for approximately 5 seconds, the boat will automatically enter cruise control mode, simplifying operations. To exit cruise control, push the remote control stick back.

6.4. Electronic Fence Function

After setting the origin point, the boat will activate an electronic fence function. This prevents the boat from sailing out of a safe distance, typically 800m, from the origin, ensuring the boat remains within controllable range.

6.5. Real-time Distance Transmission

The remote control provides real-time transmission of the boat's sailing distance, which can be used for water distance measurement.

6.6. GPS One-Click Return

The GPS module supports a one-click return function, allowing the boat to easily return to its origin. This feature also includes automatic return functions for low battery, lost control, and over-distance scenarios, enhancing safety navigation.

Video demonstrating the Flytec V066 RC Bait Boat's features, including its GPS capabilities, remote control interface, bait dropping mechanism, and navigation lights.

7. Maintenance

  • Cleaning: Keep the GPS module and its connections clean and free from dust, dirt, or moisture. Use a soft, dry cloth for cleaning.
  • Storage: When not in use for extended periods, store the GPS module in a dry, temperature-controlled environment.
  • Inspection: Periodically inspect the ribbon cable for any signs of wear, fraying, or damage. Replace if necessary.

8. Troubleshooting

ProblemPossible CauseSolution
No GPS signal / Weak signalObstruction, poor weather, loose connectionMove to an open area, check weather conditions, ensure ribbon cable is securely connected.
Inaccurate positioningInterference, initial calibration neededEnsure shielding paper is correctly placed. Allow more time for GPS to acquire a stable lock.
Boat does not return to originGPS signal lost, origin not set, low batteryVerify GPS signal strength. Ensure an origin point was successfully set. Check boat battery level.

9. User Tips

  • For best GPS performance, always operate the bait boat in open water areas away from tall buildings, dense foliage, or overhead power lines that might obstruct satellite signals.
  • Regularly check the remote control's screen for satellite signal strength and battery levels to avoid unexpected loss of control or return-to-origin issues.
  • Familiarize yourself with setting and recalling fishing grounds and anchor points to maximize the efficiency of your baiting operations.

10. Warranty and Support

For warranty information, technical support, or replacement parts, please contact the Flytec Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.