1. Introduction
The NEEWER QZ-S is a versatile TTL wireless flash trigger transmitter designed for photographers seeking intuitive control over their flash systems. Featuring a dimmable OLED touchscreen, it supports various flash modes including TTL automatic flash, M/Manual, TCM, and Strobe, along with 1/8000s High-Speed Sync (HSS). Its built-in 2.4G Q System allows for remote control of compatible NEEWER Q flashes and other brands, making it an essential tool for diverse shooting scenarios.

2. Package Contents
Please check the package to ensure all items are present:
- 1 x QZ-S Flash Trigger
- 1 x USB to Type C Cable
- 1 x Storage Case

3. Setup
3.1. Charging the Battery
The QZ-S is equipped with a built-in 3.7V 1000mAh rechargeable lithium battery. For optimal battery longevity, please fully charge the device before first use.
- Connect the included USB to Type C cable to the QZ-S's Type C port.
- Connect the other end of the cable to a suitable USB power source (e.g., computer USB port, USB wall adapter).
- The battery charges in approximately 2.5 hours. The device supports real-time battery display.

3.2. Mounting on Camera
The QZ-S is a hot shoe flash trigger. To mount it on your camera:
- Slide the QZ-S onto your camera's hot shoe mount.
- Secure it by tightening the locking mechanism (if present) on the flash trigger.
3.3. Power On/Off
To power on the device, press and hold the power button. To power off, press and hold the power button again. If the device is unresponsive, press and hold the power button and test button at the same time to force shutdown.
4. Operating Instructions
4.1. Touchscreen Controls
The QZ-S features an HD OLED touchscreen for intuitive control. You can smoothly control all functions with a simple swipe or tap on the screen.

Screen Brightness Adjustment
The screen brightness can be adjusted to suit any lighting environment (indoor or outdoor). Swipe down the screen and slide to adjust the brightness percentage.
Page Lock
To prevent accidental touches during shooting, you can lock the screen. Long press the flash trigger button for 2 seconds or the screen for 2 seconds to unlock.
4.2. Multiple Flash Modes
The QZ-S supports various flash modes:
- TTL (Through-The-Lens) Automatic Flash: Provides automatic flash output for correct exposure.
- M (Manual) Mode: Allows manual adjustment of flash output from 1/256 to 1/1.
- TCM Conversion: Efficiently switch between the high efficiency of TTL mode and the precision of manual mode.
- Strobe Mode: For multi-flash effects.
- S1/S2 Mode: Optical slave modes.
Additional features include ±3 EV exposure compensation, auto or manual zooming (20 to 200mm), and single point triggering.

4.3. 2.4G Q System Wireless Control
The built-in 2.4G Q System allows you to wirelessly control compatible NEEWER Q flashes (off-camera only) and other brands. It supports 5 groups, 32 channels, and 01-99 IDs, with a transmission range of 0-100m.

4.4. High-Speed Sync (HSS)
The QZ-S supports 1/8000s HSS sync, allowing you to capture perfectly exposed shots even with fast shutter speeds.

4.5. Firmware Updates
The QZ-S supports firmware upgrades via its Type C port for new features and improved compatibility.
5. Compatibility
The NEEWER QZ-S TTL Wireless Flash Trigger Transmitter is compatible with a wide range of cameras and flashes:
5.1. Compatible Camera Brands
- Sony
- Canon
- Nikon
- Fujifilm
5.2. Compatible Sony Camera Models
A9 III, a9iii, A9 II, a9ii, A9, A7R V, a7rv, A7R IV, a7riv, Alpha 7 IV, A7R III, a7riii, A7S III, a7siii, A7 III, A7S II, a7sii, A7R II, a7rii, A7 II, a7ii, A7S, A7, A7C II, A7C, A1, A6700, A6600, A6500, A6400, Alpha 6100, A6000, A99, A350, ZVE10, ZV-E1 mirrorless cameras.
5.3. Compatible NEEWER Q Flashes (Off-Camera Only)
Z3R-S, Z2PRO-S, Z2-S, Z1-S, Z880-S, NW760-S, S102/S101-400W Pro, Q6, Q4, Q4PRO, Q300, Q200, Q120.
5.4. Compatible Godox Flashes
IT32, V1, V100 camera flashes, AD200 Pro II, AD100 Pro II outdoor flashes (Latest firmware required for compatibility).
6. Maintenance
6.1. Battery Care
- Always fully charge the battery before first use.
- Avoid completely draining the battery frequently to prolong its lifespan.
- Store the device in a cool, dry place when not in use for extended periods.
6.2. Cleaning
- Use a soft, dry cloth to clean the exterior of the flash trigger.
- For the touchscreen, use a microfiber cloth specifically designed for electronics.
- Avoid using harsh chemicals or abrasive materials that could damage the device.
7. Troubleshooting
- Device does not turn on: Ensure the battery is charged. If it's unresponsive, press and hold the power button and test button simultaneously to force a shutdown and then attempt to power on again.
- Flash not firing: Check compatibility with your camera and flash unit. Ensure the QZ-S is securely mounted on the camera's hot shoe. Verify that the flash unit is powered on and set to the correct mode (e.g., slave mode if off-camera). Check channel and group settings on both the trigger and flash.
- Touchscreen unresponsive: Ensure the screen is not locked. Long press the flash trigger button for 2 seconds or the screen for 2 seconds to unlock. If the issue persists, try a force shutdown and restart.
- Inconsistent flash output: Check exposure compensation settings. Ensure the flash unit's battery is adequately charged. Verify that the QZ-S and flash unit are within the effective transmission range (0-100m) and without significant obstructions.
8. User Tips
- The touchscreen is generally responsive and makes setup easy.
- When adjusting settings, remember that the knob requires a click before turning to select the desired parameter.
- To lock the screen, long-press the 'M' button and then select the lock option on the screen to prevent accidental changes during a shoot.
9. Specifications
| Feature | Description |
|---|---|
| Model | QZ-S |
| Compatibility | Sony, Canon, Nikon, Fujifilm Cameras |
| Built-in Battery | 3.7V, 1000mAh, 3.7Wh |
| Charging Time | 2.5 hours |
| Battery Life | Approximately 6-10 hours |
| TTL Auto Flash | Yes |
| Manual Flash | Yes |
| Strobe Flash | Yes |
| Front Curtain Sync | Yes |
| Rear Curtain Sync | Yes |
| High-speed Sync (HSS) | Yes (up to 1/8000s) |
| Exposure Compensation | ±3EV, adjustable in 1/3EV increments |
| Buzzer | The flash buzzer can be controlled via the flash trigger |
| ZOOM Setting | Automatic, Manual (20-200mm) |
| TCM Conversion | Converts TTL shooting values to M output values |
| Firmware Update | USB C Interface |
| Display | Touchscreen, screen brightness adjustable |
| Transmission Range | 0-100m |
| Channels | 32 |
| Wireless ID | OFF, 01-99 |
| Groups | A, B, C, D, E |
| Dimensions | 2.5"×1.6"×1.5" / 64×41×38mm |
| Weight | 2.1oz / 60g |

10. Warranty & Support
For warranty information and technical support, please refer to the official NEEWER website or contact their customer service directly. Keep your purchase receipt for warranty claims.
11. Product Overview Video
Watch this general overview video from NEEWER showcasing various photography gear, including flash triggers and other accessories. While not specific to the QZ-S model, it provides insight into the brand's product ecosystem.