Product Overview
The i Cafilas 19 Bar Semi-Automatic Espresso Coffee Maker is designed to bring a professional coffee experience to your home. Featuring a built-in grinder, 19 bar pressure extraction, and a milk frothing system, it allows you to craft a variety of coffee beverages from whole beans.

Image: The i Cafilas Espresso Machine, showcasing its design and various coffee creations.
Key Features
- Integrated Grinder with 11 Precision Settings
- 19 Bar High-Pressure Extraction for Rich Crema
- Pre-Infusion System for Enhanced Flavor
- High-Powered Steam Wand for Milk Frothing
- Smart Touch Panel for Easy Operation
- NTC Intelligent Temperature Control
- 58mm Stainless Steel Portafilter
- Removable Water Tank and Drip Tray for Easy Cleaning

Image: Diagram illustrating the product's advantages including grinding & brewing all-in-one, 11-level fine grinding, 19Bar high-pressure extraction, high pressure steam wand, pre-infusion system, intelligent temperature control, touch panel, powder blowing device, and double dose portafilter.
Product Components
Familiarize yourself with the components of your espresso machine:

Image: Exploded view diagram of the espresso machine components, labeled 1-13.
- Tamper
- Filter
- Handle
- Power button
- Brewing head
- Touch panel
- Filter holder
- Steam pipe
- Drain tray cover
- Bean hopper cover
- Bean hopper
- Water tank cover
- Water tank
Included Accessories

Image: Visual representation of all items included with the espresso machine.
- Grinding & Brewing all in one machine
- Single shot basket
- Double shot basket
- 58mm Stainless steel Portafilter
- Tamper
- Knock box
- Milk Pitcher
- Spoon
- Use manual (this document)
- Power cable
Setup
Follow these steps for the initial setup of your i Cafilas Espresso Coffee Maker:
- Unpack: Carefully remove all components from the packaging.
- Clean: Wash the water tank, portafilter, filter baskets, milk pitcher, and spoon with warm soapy water. Rinse thoroughly and dry.
- Fill Water Tank: Fill the removable water tank (13) with fresh, cold water up to the MAX mark. Ensure the water tank cover (12) is securely placed.
- Fill Bean Hopper: Pour fresh coffee beans into the bean hopper (11). Close the bean hopper cover (10).
- Power On: Plug the power cable (10) into a suitable electrical outlet. Press and hold the Power Button (4) on the Smart Touch Panel for 2 seconds to turn on the machine and initiate preheating.
- Attach Portafilter: Ensure the desired filter basket (single or double shot) is in the 58mm Stainless Steel Portafilter (4). Attach the portafilter to the brewing head (5) by aligning it and twisting firmly to the right.

Image: Step-by-step visual guide for machine setup, including filling water, adding beans, grinding, and brewing.
Operating Instructions
Grinding Coffee
- Place the portafilter under the grinder outlet.
- Adjust the grinding degree using the dial on the bean hopper. There are 11 precision settings from fine to coarse.
- Press the Grinding Mode icon on the Smart Touch Panel to start grinding. The machine will automatically grind and dose the coffee.
- Once grinding is complete, remove the portafilter.

Image: Illustration of the 11 precision grind settings, from fine to coarse, and the auto-grinding mechanism.
Tamping
- Use the provided tamper (1) to press the ground coffee firmly and evenly into the filter basket.
- Ensure the coffee bed is level for optimal extraction.
Brewing Espresso
- Attach the portafilter with tamped coffee to the brewing head (5).
- Place your cup(s) on the drip tray under the portafilter.
- Select your desired cup size:
- Press the Small Cup Mode icon for a single shot (approx. 40ml).
- Press the Large Cup Mode icon for a double shot (approx. 80ml).
- The machine will begin the pre-infusion process, gently wetting the coffee grounds at low pressure to release trapped gases and reduce channeling.
- After pre-infusion, the machine will extract espresso at 19 bar pressure and an optimal brew temperature of 197°F (92°C) for a full-flavored, rich espresso.

Image: Diagram explaining the pre-infusion process and NTC intelligent temperature control for balanced flavor.

Image: Close-up of the Smart Touch Panel, showing icons for Power, Small Cup Mode, Large Cup Mode, Steam Mode, and Grinding Mode.
Milk Frothing
- Fill the milk pitcher (7) with cold milk (dairy or non-dairy).
- Position the steam pipe (8) into the milk, just below the surface.
- Press the Steam Mode icon on the Smart Touch Panel.
- Once steam is ready, turn the steam knob to release steam.
- Move the pitcher up and down to create smooth, delicate milk foam.
- When desired texture is achieved, turn off the steam knob and then press the Steam Mode icon again to stop.
- Wipe the steam wand immediately with a damp cloth after use.

Image: Demonstrates the high-powered steam wand creating smooth milk froth and for latte art.
Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your espresso machine.
Daily Cleaning
- Portafilter and Filter Baskets: After each use, remove the portafilter, discard coffee grounds, and rinse the portafilter and filter baskets under running water.
- Steam Wand: Immediately after frothing milk, wipe the steam wand with a damp cloth to prevent milk residue from drying. Purge a small amount of steam to clear any internal blockages.
- Drip Tray: Empty and rinse the removable drip tray cover (9) and drip tray regularly.
- Water Tank: Empty and rinse the water tank (13) daily, refilling with fresh water.

Image: Highlights the removable water tank and removable water tray for easy cleaning.
Periodic Cleaning
- Brewing Head: Use a damp cloth to wipe the brewing head (5) and surrounding area.
- Grinder: Periodically clean the grinder burrs according to the instructions in the full manual (if available) to prevent coffee oil buildup.
- Descaling: Depending on water hardness and usage, descale the machine every 2-3 months. Use a commercial descaling solution specifically designed for espresso machines and follow the product's instructions.
Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No coffee dispenses | No water in tank; clogged filter; machine not preheated | Fill water tank; clean filter basket; allow machine to preheat fully |
| Weak or watery espresso | Coffee grounds too coarse; insufficient coffee; tamping too light | Adjust grind to finer setting; use more coffee; tamp more firmly |
| Coffee drips slowly | Coffee grounds too fine; too much coffee; tamping too hard | Adjust grind to coarser setting; use less coffee; tamp lighter |
| No steam from wand | Steam wand clogged; machine not in steam mode | Clean steam wand; ensure Steam Mode is selected and machine is ready |
| Machine leaks water | Water tank not seated correctly; loose connections | Ensure water tank is properly inserted; check all connections |
If you encounter issues not listed here or if the solutions do not resolve the problem, please contact customer support.
Specifications

Image: Detailed product parameters including dimensions, voltage, power, and pressure.
| Parameter | Value |
|---|---|
| Product Name | Semi-Automatic Espresso Coffee Maker |
| Model No. | ME2603 |
| Rated Voltage | 110V-220V |
| Rated Power | 1100W-1350W |
| Pressure | 19 bar |
| Water Tank Capacity | 800ml |
| Power Cord Length | 110cm |
| Net Weight | 3.8KG |
| Dimensions (Front) | 289mm (Width) |
| Dimensions (Back) | 348.5mm (Height) x 230.5mm (Width) |
| Material | Other |
| Origin | Mainland China |
| Battery Included | No |
| High-concerned chemical | None |
User Tips
- Fresh Beans are Key: Always use freshly roasted coffee beans for the best flavor. Grind them just before brewing.
- Experiment with Grind Size: The ideal grind size can vary slightly depending on the beans. If your espresso is too fast and watery, try a finer grind. If it's too slow and bitter, try a coarser grind.
- Consistent Tamping: Apply consistent pressure when tamping to ensure even water flow through the coffee puck.
- Pre-heat Your Cups: Warm your espresso cups before brewing to help maintain the temperature of your coffee.
- Clean Steam Wand Immediately: Milk residue can quickly dry and clog the steam wand, making it difficult to clean later.
- Regular Descaling: Descaling is crucial for maintaining machine performance and preventing mineral buildup, especially in areas with hard water.
Warranty and Support
For any product inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty validation.
Product Demonstration Video
Video: A comprehensive demonstration of the i Cafilas Espresso Machine, covering grinding, brewing, and milk frothing processes.