fiil FIIL CC 3

Contents

FIIL CC 3 True Wireless Earbuds Instruction Manual

Model: FIIL CC 3 | Brand: fiil

Introduction

The FIIL CC 3 True Wireless Earbuds are designed to provide a high-quality audio experience with advanced noise-canceling technology. Featuring a 13mm wool basin composite diaphragm sound unit and AI precise noise reduction, these earbuds deliver clear sound and effective noise cancellation. The sleek design includes a 45° high gloss cut angle charging case, making them both stylish and functional. This manual will guide you through the setup, operation, and maintenance of your FIIL CC 3 earbuds.

FIIL CC 3 Earbuds and Charging Case
FIIL CC 3 Earbuds and Charging Case

Product Overview Video

Official product video showcasing the FIIL CC 3 earbuds and charging case.

Package Contents

Please check that all items are present in your package:

  • FIIL CC 3 Earbuds (L/R)
  • Charging Case
  • Type-C USB Charging Cable
  • Quick Start Guide (Physical card)
FIIL CC 3 Quick Start Guide and components
Quick Start Guide and included components

Specifications

FIIL CC 3 Technical Specifications
FeatureSpecification
ModelFIIL CC 3
ColorTitanium Space Grey
Earbud Weight~4.4g each
Charging Case Weight~34.4g
Dimensions (Case)46.76mm x 22.59mm x 45.7mm (Width/Height/Depth)
Bluetooth Version6.0
Bluetooth Multi-pointSupported
Bluetooth ProtocolsHFP, HSP, A2DP, AVRCP
Audio DecodingAAC, SBC, LDAC
Earbud Battery Capacity~38mAh (each)
Charging Case Battery Capacity~400mAh
Charging PortUSB Type-C
Earbud Charging Time~60 minutes
Case Charging Time~100 minutes (1.5 hours)
Music Playback (Earbuds)Approx. 8.0 hours (with ANC off), Approx. 4.5 hours (with ANC on)
Total Battery Life (with case)36+ hours (case provides ~3.5 extra charges)
Quick Charge2 hours playback with 5-minute charge
Active Noise Reduction50dB Ultra-Deep Dual-Feed Hybrid ANC
Speaker SizeΦ13.0mm custom wool dome composite diaphragm
Speaker MagnetHigh-density neodymium magnet
Horn Impedance32Ω
Frequency Response Range20Hz - 20kHz
Speaker Sensitivity123 ±1.5dB@1kHz@0.179V
Microphone Frequency Response20Hz - 20kHz
Microphone Sensitivity-38dBV@94dBSPL, 1kHz inpt
Waterproof RatingIPX5 (earphone)
Call Noise CancellationDual-mic ENC (Reduced by ~26dB / ~95%)
EQ Settings3+12+10 custom EQ
Low Latency ModeSupported (2 mode switch: Music, Game)
Maximum Wireless Range<10m
Vocalism PrincipleBalanced Armature
CommunicationWireless (Bluetooth)
Detailed specifications table for FIIL CC 3
Detailed specifications of the FIIL CC 3 Earbuds

Setup Guide

1. Initial Charging

Before first use, ensure both the earbuds and the charging case are fully charged.

  1. Place the earbuds into the charging case.
  2. Connect the Type-C USB charging cable to the charging case and a power source.
  3. The indicator lights on the case will show charging status.
  4. Earbuds take approximately 60 minutes to fully charge. The charging case takes approximately 100 minutes (1.5 hours) to fully charge.
FIIL CC 3 Earbuds inside charging case, top view
Earbuds placed in the charging case

2. Bluetooth Pairing

The FIIL CC 3 earbuds utilize Bluetooth 6.0 for stable and efficient connection.

  1. Charge for 10 minutes: Ensure the earbuds have some charge.
  2. Remove from case: Take both earbuds out of the charging case. They will automatically enter pairing mode.
  3. Flashing white light: The earbuds' indicator lights will flash white, indicating they are ready to pair.
  4. Connect via device: On your device (smartphone, tablet, etc.), go to Bluetooth settings and select "FIIL CC 3" from the list of available devices to connect.

The earbuds support Bluetooth multi-point technology, allowing simultaneous connection to two devices. You can switch between devices with a one-key connection/disconnection of the second device.

FIIL CC 3 Quick Start Guide showing pairing steps
Quick Start Guide illustrating pairing steps

Operating Instructions

Touch Controls

The FIIL CC 3 earbuds feature intuitive touch controls. Specific functions can often be customized via the FIIL+ App.

  • Double-tap: Typically used for play/pause, answer/end calls.
  • 2-second hold: Often used to switch between Noise Cancellation modes (ANC On/Off/Open) or activate voice assistant.
  • Volume adjustment, track skipping, and ANC key customization: Can be configured in the "Custom Touch" settings of the FIIL+ App.
Quick Start Guide showing touch controls
Basic touch controls as shown on the Quick Start Guide

Noise Cancellation (ANC)

The FIIL CC 3 offers advanced noise cancellation features:

  • 50dB Ultra-Deep Dual-Feed Hybrid ANC: Provides significant noise reduction for a quiet listening experience.
  • Smart Driving Noise Reduction: An algorithm with 16,000 detections/sec adapts to your environment for smarter, more efficient noise cancellation.
  • Environment-Adaptive Noise Cancellation: Continuously detects the surrounding environment and adjusts noise cancellation depth for optimal comfort.
  • Ear Canal Adaptive Detection: Monitors wearing status every 16ms and compensates for noise reduction levels, ensuring consistent performance.
  • Adaptive EQ: Detects wind noise every 32ms and applies counter-curves to neutralize interference, enhancing sound quality.
Woman wearing FIIL CC 3 earbuds, illustrating intelligent noise cancellation
Intelligent Driving Noise Cancellation in action

Wear Detection

The earbuds feature a built-in wear detection chip for convenient control:

  • Take off an earbud to automatically pause playback.
  • Put the earbud back on to resume playback.
FIIL CC 3 earbuds and charging case on a table, illustrating wear detection
Earbuds with wear detection feature

Call Noise Cancellation

Equipped with a 4-Mic AI Call Noise Cancellation system, the earbuds reduce over 95% ambient noise during calls, ensuring your voice is clearly heard. This system uses 2 directional microphones and 2 feedforward microphones for accurate sound pickup.

Woman on a call wearing FIIL CC 3 earbuds, illustrating call noise cancellation
4-Mic AI Call Noise Cancellation for clear communication

Low Latency Mode

The FIIL CC 3 supports a low latency mode, which can be switched between Music and Game modes. This feature is ideal for gaming or watching videos where audio-visual synchronization is critical.

FIIL+ App Control

For advanced settings and customization, download the FIIL+ App. The app allows you to:

  • Customize your sound with 3+12+10 custom EQ settings.
  • Adjust MAF Noise Tuning (ANC, Open, Close modes).
  • Enable Environment Adaptive Noise Cancellation.
  • Manage Adaptive EQ settings.
  • Customize touch controls for various functions like volume, track skipping, and ANC.

Note: Effective May 2026, support for the FIIL App will be temporarily suspended due to software upgrades. Please check the official FIIL website for updates.

Screenshot of FIIL+ App showing EQ and noise tuning settings
FIIL+ App interface for sound and noise cancellation customization

You can scan the QR code on the packaging or in the Quick Start Guide to download the FIIL+ App.

FIIL CC 3 packaging with QR codes for FIIL+ App
FIIL CC 3 packaging showing QR codes for app download

Maintenance and Care

  • Keep the earbuds and charging case clean and dry. Use a soft, dry cloth to wipe them.
  • Avoid exposing the device to extreme temperatures, humidity, or corrosive substances.
  • Do not attempt to disassemble or modify the earbuds or charging case, as this will void the warranty and may cause damage.
  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • The earbuds have an IPX5 waterproof rating, meaning they are resistant to sweat and light splashes. Do not submerge them in water.

Troubleshooting

Earbuds not pairing or connecting?
  • Ensure the earbuds are charged and removed from the case.
  • Turn off and on Bluetooth on your device.
  • Forget the device in your Bluetooth settings and try pairing again.
  • Reset the earbuds (refer to the FIIL+ App or online instructions for specific reset procedures).
No sound or low volume?
  • Check the volume levels on both your device and the earbuds.
  • Ensure the earbuds are properly seated in your ears.
  • Verify that the earbuds are connected to the correct device.
Noise cancellation not effective?
  • Ensure ANC is enabled, either via touch controls or the FIIL+ App.
  • Make sure the earbuds fit snugly in your ears to create a good seal.
  • Check the FIIL+ App for adaptive noise cancellation settings.

User Tips

  • Earbud Removal: Some users find the earbuds slightly difficult to remove from the charging case due to the design. A gentle push from the bottom or side might help. Over time, you may develop a technique that works best for you.
  • Sound Enhancement: For optimal sound quality, especially enhanced bass and clearer mid-to-high frequencies, ensure that Noise Cancellation (ANC) is enabled.
  • App Customization: Utilize the FIIL+ App to its full potential. It allows for detailed customization of EQ settings and noise cancellation modes, significantly improving your listening experience.
  • Comfort for Prolonged Use: If you experience discomfort during prolonged use, try adjusting the earbud's position slightly in your ear.

Warranty and Support

For detailed warranty information and customer support, please refer to the official FIIL website or contact your retailer. A comprehensive user manual in PDF format is also available for download:

Download User Manual (PDF)

Please retain your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.