MEKEDE Android Car Multimedia System

Contents

MEKEDE Android Car Multimedia System User Manual

For Audi A4 B6 B7 S4 RS4 & Seat Exeo (2002-2008)

1. Introduction

Thank you for choosing the MEKEDE Android Car Multimedia System. This manual provides detailed instructions for the installation, operation, and maintenance of your new car stereo. Please read this manual thoroughly before using the product to ensure proper functionality and safety. This system is designed to fit Audi A4 B6, B7, S4, RS4, and Seat Exeo models manufactured between 2002 and 2008.

2. Safety Information

  • Always operate the device responsibly and in accordance with local traffic laws.
  • Do not attempt to install or service the unit yourself if you are not qualified. Refer to a professional installer.
  • Ensure all wiring is correctly connected to prevent damage to the unit or vehicle.
  • Keep the unit away from water, moisture, and extreme temperatures.
  • Do not block the cooling fan vents on the back of the unit.

3. Package Contents

Please check the contents of your package against the list below. Note that specific cables and accessories may vary slightly depending on the model (MN-H2, X10, X20, M700S, M800S) you purchased.

Diagram showing package contents including head unit, power cable, Canbus box, and various cables for different models.
Figure 3.1: Package Contents Overview
  • Main Head Unit (7-inch display)
  • Power Cable with Canbus Box
  • GPS Antenna
  • USB Cables (quantity may vary by model)
  • RCA Cables (Audio out, Video in, etc.)
  • Microphone (MIC)
  • Reversing Camera (Gift)
  • Disassembly Tools (Gift)
  • 4G Antenna (for X10, X20, M700S, M800S models only)

4. Specifications

The following table outlines the key specifications for the different models of the MEKEDE Android Car Multimedia System:

Table showing configuration parameters for MN-H2, X10, X20, M700S, M800S models.
Figure 4.1: Configuration Parameters by Model
Technical Specifications
FeatureMN-H2X10X20M700SM800S
Operating SystemAndroid 14
Internet ConnectivityWiFi4G LTE + WiFi
CPU Core4-Core8Core 1.6GHz UIS8581A8Core Unisoc U1S7862S (2*Cortex A75+6*Cortex A55)
RAM / ROM2GB / 32GB2GB / 32GB4GB / 64GB8GB / 128GB8GB / 256GB
CarPlay / Android AutoN/AWireless
Bluetooth ModuleBT4.1BT5.0
Screen Resolution1024x600
Screen TypeIPSQLED
Cooling FanYes
AMP ICYD7388Toshiba 001 / TDA7738TDA7851
Radio ChipMT6625LN47557708
Full AV OutputOptional
DSPOptionalEQYes
Voice ControlOptional (requires software purchase)
RDSYes
PIP Split ScreenNoneYes
3D Real-Time DynamicsNoneYes
Multicolor Button LightYes
Max External Memory256G
Out Power4*45W
Voltage12 V
Item Weight1.5kg
Item Size7 inch
Digital Media FormatMp3, MP4, WMA, JPEG
OSD LanguageChinese (Simplified), Chinese (Traditional), Irish, Polish, Danish, Russian, Finnish, Korean, Dutch, Czech, Croatian, Latvian, Romanian, Japanese, Swedish, Slovak, Slovenian, THAI, Ukrainian, Spanish, English
CertificationCE
Material TypePlastic Hardware

Note: Supporting accessories such as DVR, TPMS, OBD2, and DAB+ are optional and must be purchased separately.

5. Installation and Setup

Installation of the MEKEDE Android Car Multimedia System is generally 'Plug and Play' for compatible Audi A4 B6/B7/S4/RS4 and Seat Exeo models (2002-2008). However, professional installation is highly recommended to ensure correct wiring and avoid damage.

5.1 Pre-Installation Check

  • Verify all package contents are present.
  • Ensure your vehicle's model and year are compatible. If unsure, consult a professional or the seller with a photo of your car's CD rental area.
  • Disconnect the vehicle's battery before starting installation.

5.2 Wiring Diagrams

The following diagrams illustrate the back panel connections for different models. Carefully match the connectors to your vehicle's wiring harness.

MN-H2 Wiring Diagram

Wiring diagram for the back of the MN-H2 main unit, showing power cable, RCA, Digital TV CAN, USB, GPS, Reverse Video, Radio, and Cooling Fan connections.
Figure 5.1: MN-H2 Back Panel Connections

Key Connections for MN-H2:

  • A. Power Cable: Connects to vehicle's power harness. Includes GND, +12VDC, ACC, Key Switch, Small Lights, Reverse Detecting Line, Steering Wheel Control, Front/Rear Speakers.
  • B. RCA Cable: For audio output.
  • C. Digital TV. CAN: Connect if your car needs a Canbus box.
  • D. USB Interface
  • E. USB Interface
  • F. Reverse Video Cable
  • H. Radio Antenna
  • I. GPS Interface
  • L. Cooling Fan

X10 / X20 Wiring Diagram

Wiring diagram for the back of the X10/X20 main unit, showing power cable, RCA, 4G Card Slot, Digital TV CAN, USB, GPS, Reverse Video, Radio, 4G+ Wireless Network, and Cooling Fan connections.
Figure 5.2: X10 / X20 Back Panel Connections

Key Connections for X10 / X20:

  • A. Power Cable: Connects to vehicle's power harness. Includes GND, +12VDC, ACC, Key Switch, Small Lights, Reverse Detecting Line, Steering Wheel Control, Front/Rear Speakers.
  • B. RCA Cable: For audio output.
  • C. Digital TV. CAN: Connect if your car needs a Canbus box.
  • D. USB Interface
  • E. USB Interface
  • F. Reverse Video Cable
  • H. Radio Antenna
  • I. GPS Interface
  • J. 4G+ Wireless Network Interface
  • L. Cooling Fan

M700S / M800S Wiring Diagram

Wiring diagram for the back of the M700S/M800S main unit, showing power cable, RCA, 4G Card Slot, 360 panoramic device, Digital TV CAN, USB, Reverse Video, Radio, GPS, 4G+ Wireless Network, Cooling Fan, Coaxial, and Optical interfaces.
Figure 5.3: M700S / M800S Back Panel Connections

Key Connections for M700S / M800S:

  • A. Power Cable: Connects to vehicle's power harness. Includes GND, +12VDC, ACC, Key Switch, Small Lights, Reverse Detecting Line, Steering Wheel Control, Front/Rear Speakers.
  • B. RCA Cable: For audio output.
  • C. 360° Panoramic Device Interface
  • D. Digital TV. CAN: Connect if your car needs a Canbus box.
  • E. One USB Interface
  • F. Double USB Interface
  • G. Reverse Video Cable
  • H. Radio Antenna
  • I. 5G WiFi Antenna
  • J. GPS Interface
  • K. 4G+ Wireless Network Interface
  • L. Cooling Fan
  • M. COAXIAL Interface
  • N. OPTICAL Interface

5.3 Post-Installation

After installation, reconnect the vehicle's battery. Turn on the ignition and test all functions of the multimedia system, including audio, navigation, Bluetooth, and steering wheel controls.

Image showing the MEKEDE unit installed in an Audi A4 dashboard, with before and after installation views.
Figure 5.4: Before and After Installation Example

6. Operation

Your MEKEDE Android Car Multimedia System offers a wide range of features for an enhanced driving experience.

6.1 User Interface (UI)

The system offers various user interface themes and layouts to personalize your experience.

Screenshot showing over 50 UI options for the MN-H2 model.
Figure 6.1: MN-H2 UI Display Collection
Screenshot showing various UI options for X10 and X20 models.
Figure 6.2: X10 / X20 UI Display Collection
Screenshot showing various UI options for M700S and M800S models, including daylight and night modes.
Figure 6.3: M700S / M800S Theme Interfaces

6.2 GPS Navigation

The system features a built-in global positioning system for omni-directional map display, real-time traffic conditions, and accurate positioning. It supports various navigation applications.

Screenshot of the GPS navigation interface showing a map with route and various navigation app icons like iGO, Sygic, Yandex, Google, Waze, and AMAP.
Figure 6.4: GPS Navigation Interface

6.3 4G LTE and WiFi Connectivity

Models X10, X20, M700S, and M800S include built-in 4G modules, allowing you to stay connected to cellular data networks without needing your phone's hotspot. All models support WiFi connectivity.

Diagram illustrating built-in 4G LTE and WiFi functionality with a 4G SIM card slot. Note: MN-H2 only supports WiFi.
Figure 6.5: 4G LTE and WiFi Connectivity

6.4 Intelligent Day/Night Mode

For X10, X20, M700S, and M800S models, the system features an intelligent day/night mode that automatically adjusts screen brightness and color to reduce glare and eye strain, ensuring clear visibility in all lighting conditions.

Comparison of day mode (clear and bright) and night mode (deep texture, no glare) for the display.
Figure 6.6: Intelligent Day/Night Mode

6.5 Wireless CarPlay & Android Auto

X10, X20, M700S, and M800S models support wireless CarPlay and Android Auto, allowing seamless integration with your smartphone for navigation, music, calls, and more, without the need for additional accessories.

Graphic indicating support for CarPlay and Android Auto.
Figure 6.7: Wireless CarPlay and Android Auto Support

6.6 Bluetooth Functionality

The built-in smart Bluetooth system supports mobile phone pairing for hands-free calling, synchronizing contacts, and streaming Bluetooth music. It also supports steering wheel button control for safe driving.

Screenshot of the Bluetooth interface showing options for BT Phone, Call Record, Phone Book, Devices, and BT Set, with icons for BT music, sync contacts, and synchronous call record.
Figure 6.8: Bluetooth Function Interface

6.7 FM/AM RDS Radio

The system supports FM/AM radio with RDS (Radio Data System). You can perform automatic or manual station searches and save your favorite channels.

Screenshot of the FM/AM RDS Radio interface showing frequency display, station presets, and options for Stereo, radio_loc, Scan, Save, and Edit. Also shows an optional DAB+ module.
Figure 6.9: FM/AM RDS Radio Interface

6.8 Split Screen and Picture-in-Picture (PIP)

Models X10, X20, M700S, and M800S support split-screen and Picture-in-Picture functionality, allowing you to run two applications simultaneously on the display.

Screenshots demonstrating split-screen and Picture-in-Picture modes on the multimedia system.
Figure 6.10: Split Screen and PIP Functionality

6.9 DSP Equalizer (M700S, M800S)

M700S and M800S models feature a built-in DSP (Digital Signal Processor) equalizer for advanced audio tuning and customization.

Screenshot of the DSP equalizer interface with various audio settings and frequency bands.
Figure 6.11: DSP Equalizer Interface

6.10 Optional Accessories Integration

The system supports various optional accessories to expand its capabilities:

  • Rear View Camera: Supports 1080P AHD waterproof rear cameras for clear reversing assistance.
  • Image showing a car reversing with parking lines displayed on the screen, and a separate image of a 1080P AHD rear view camera.
    Figure 6.12: Rear View Camera Support
  • AV Output: Optional AV output allows connecting external displays (e.g., headrest monitors) for rear passengers to watch videos.
  • Diagram showing AV output options (RCA Port, HDMI-compatible) for connecting to headrest displays.
    Figure 6.13: AV Output Support
  • OBD (On-Board Diagnostics): Supports optional OBD devices for real-time vehicle data monitoring.
  • Image showing an OBD device and its connection to the car multimedia system.
    Figure 6.14: OBD Support
  • DAB+ (Digital Audio Broadcasting): Supports optional DAB+ modules for higher quality digital radio reception in supported regions.
  • Image showing a DAB+ module and its connection to the car multimedia system.
    Figure 6.15: DAB+ Support
  • TPMS (Tire Pressure Monitoring System): Supports optional TPMS sensors (external or built-in) to monitor tire pressure and temperature in real-time.
  • Screenshot of the TPMS interface showing tire pressure and temperature readings, and images of external and built-in TPMS sensors.
    Figure 6.16: TPMS Support
  • ADAS DVR (Anti-collision warning driving recorder): Supports optional DVRs for recording driving footage and providing anti-collision warnings.
  • Screenshots showing vehicle collision warnings (left lane departure, front collision, right lane departure) and an image of an ADAS DVR camera.
    Figure 6.17: ADAS DVR Support

6.11 Vehicle Status Display

If your vehicle is equipped with a Canbus box and the correct model is selected, the system can display real-time vehicle information such as door switch status and light switch status.

Screenshots showing the display of door switch status (car with open doors) and light switch status (car with headlights on).
Figure 6.18: Door and Light Switch Status Display

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior of the unit. Do not use abrasive cleaners or solvents.
  • Software Updates: Periodically check for software updates provided by MEKEDE to ensure optimal performance and access to new features. Follow the instructions provided with the update package carefully.
  • Cooling Fan: Ensure the cooling fan on the back of the unit is not obstructed to prevent overheating.

8. Troubleshooting

If you encounter issues with your multimedia system, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Unit does not power onLoose power connection, blown fuse, incorrect wiring.Check all power cables and connections. Inspect vehicle fuses. Consult a professional installer.
No soundSpeaker wires disconnected, volume too low, incorrect audio settings.Check speaker connections. Increase volume. Verify audio output settings in the system menu.
GPS not working/inaccurateGPS antenna not connected, poor signal, outdated maps.Ensure GPS antenna is securely connected and has a clear view of the sky. Update navigation maps if necessary.
Bluetooth connection issuesDevice not in pairing mode, incorrect pairing code, interference.Ensure your phone's Bluetooth is on and discoverable. Re-pair the device. Try restarting both devices.
Steering wheel controls not workingCanbus box not connected/configured, incorrect wiring.Verify Canbus box connection and configuration in system settings. Consult wiring diagrams.
Screen unresponsive/frozenSoftware glitch, system overload.Perform a soft reset (refer to system settings for reset option or press the RST button if available). If issue persists, contact support.

For issues not listed here, please contact MEKEDE customer support.

9. User Tips

  • Canbus Box: For full integration with vehicle features like door status and steering wheel controls, ensure your vehicle has a Canbus system and the Canbus box is correctly installed and configured.
  • Screen Protection: Consider using a screen protector to prevent scratches and maintain display clarity.
  • Regular Updates: Keep your system's software updated to benefit from performance improvements and new features.
  • Optional Accessories: If you plan to use optional accessories like a DVR or TPMS, ensure they are compatible with your specific MEKEDE model and installed correctly.

10. Warranty and Support

Your MEKEDE Android Car Multimedia System comes with a 365-day warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support, warranty claims, or any other inquiries, please contact MEKEDE customer service through your purchase platform or the official MEKEDE website.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.