MEKEDE MN-X

Contents

Mekede Android 14 Car Radio Carplay User Manual

Model: MN-X

Compatible with Mercedes-Benz C-Class W204/S204/C200/C260/C300 (2008-2010)

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Mekede Android 14 Car Radio Carplay system. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Mekede Android 14 Car Radio Carplay main display
Figure 1: Mekede Android 14 Car Radio Carplay main display with app icons.

2. Package Contents

Before installation, please verify that all items listed below are present in your package:

Mekede MN-X Series Package Contents
Figure 2: Package contents for the MN-X Series car multimedia system.
  • Main Unit (Car Radio Display)
  • Power Cable
  • GPS Antenna
  • 4G Antenna
  • Microphone (MIC)
  • Speaker
  • Packaging Box

3. Setup and Installation

3.1 Compatibility Check

This unit is designed for Mercedes-Benz C-Class W204/S204/C200/C260/C300 models manufactured between 2008 and 2010. Ensure your vehicle's dashboard matches the 'Before installation' image for proper fitment.

Before and after installation comparison in a Mercedes-Benz C-Class dashboard
Figure 3: Visual comparison of the car dashboard before and after installing the 10.25-inch screen.

3.2 Wiring and Connections

Professional installation is recommended. Ensure all cables are securely connected according to the vehicle's wiring diagram and the provided instructions.

3.2.1 Solving No Sound Problem

If you experience no sound after installation, follow these steps:

  1. Connect the original car fiber optic cable to the interface of the conversion line.
  2. Then, connect the conversion line to the host unit.
  3. Switch the car's audio mode to "AUX".
Detailed instructions on how to solve a 'No Sound Problem' by connecting fiber optic cables and switching to AUX mode
Figure 4: Visual guide for resolving the 'No Sound Problem' by correctly connecting fiber optic cables and setting the car to AUX mode.

Important Note:

This unit outputs sound through AUX. Please confirm that your car has an AUX function before ordering. If there is no AUX on your car, you may need an FM transmitter to produce audio. The sound quality will not be as good as AUX. Please acknowledge this issue before proceeding with installation.

Warning about AUX output and potential need for FM transmitter
Figure 5: Information regarding the unit's AUX audio output and considerations for vehicles without AUX.

3.2.2 Camera Wiring (Optional)

If installing an aftermarket camera, connect the reverse line detection wire and ground wire as shown in the diagram. For original cameras, set the camera type to "Original back car" in the settings.

Added camera wiring diagram with reverse line detection and ground wire, and camera settings
Figure 6: Wiring diagram for connecting an aftermarket camera and setting options for original cameras.

3.3 Network Connection

The unit supports both WiFi and 4G LTE connectivity. Insert an optional 4G SIM card into the designated slot for cellular data access. For WiFi, navigate to Settings > Network & Internet > Wi-Fi, select your network, and enter the password.

Built-in 4G LTE and WiFi, showing SIM card slot
Figure 7: Illustration of the built-in 4G LTE and WiFi capabilities, including the SIM card slot location.

3.4 Bluetooth Pairing

To pair your mobile phone via Bluetooth:

  1. Go to the BT application on the car radio.
  2. Ensure Bluetooth is enabled on your phone and the car radio.
  3. Search for the device name (e.g., "BT-18EO") on your phone and connect.
  4. Enter the default pair password "0000" if prompted.
Built-in Bluetooth feature, showing phone pairing and dialing
Figure 8: Demonstration of the built-in Bluetooth system, supporting mobile phone pairing, hands-free dialing, and music streaming.

3.5 CarPlay / Android Auto Setup

The unit supports both wireless CarPlay (for iOS) and wired Android Auto (for Android).

3.5.1 Wireless CarPlay (iOS)

  1. Connect your iPhone via Bluetooth to the car radio.
  2. Open the "Z-link" or "CarPlay" application on the car radio.
  3. Follow the on-screen prompts to establish the connection. (CarPlay can also be connected via USB cable).

3.5.2 Wired Android Auto (Android)

  1. Connect your Android phone to the car radio using a USB cable.
  2. Open the "Z-link" or "Android Auto" application on the car radio.
  3. Follow the on-screen prompts to establish the connection.
Built-in Car-Play and Android Auto connection steps (wireless CarPlay via BT, wired Android Auto via USB)
Figure 9: Connection steps for both Wireless Car-Play (iOS) and Wired Android Auto (Android system).

4. Operating Instructions

4.1 User Interface and Navigation

The unit features an intuitive Android 14 operating system. You can customize the UI style and wallpaper to your preference.

Main menu UI styles (Main Menu 1, Main Menu 2)
Figure 10: Examples of different main menu UI styles available on the unit.

4.2 Dual System Switching

Seamlessly switch between the original car system and the Android 14 system by tapping the 'Switch' icon on the display.

Dual system free switching between original car system and Android 14 system
Figure 11: Illustration of the dual system switching functionality, allowing users to toggle between the original car interface and the Android 14 system.

4.3 GPS Navigation

The unit has a built-in global positioning system and supports various navigation apps like Navitel, iGO, Yandex, and Google Maps. It provides real-time traffic conditions and omni-directional map display.

Features like GPS navigation (Navitel, iGO, Yandex, Google Maps), split screen, and Mirror Link (wired/wireless for iOS/Android)
Figure 12: Overview of GPS navigation capabilities, split screen function, and Mirror Link options.

4.4 Media Playback

Play music and videos from local storage, USB devices, or streaming apps. The unit supports various digital media formats including CD (though no built-in CD player).

4.4.1 DSP (Digital Sound Processor)

Utilize the powerful DSP chip with 32 equalizer adjustments to fine-tune the sound frequencies for an optimal audio experience.

DSP (Digital Sound Processor) with 32 EQ adjustments interface
Figure 13: The DSP interface showing 32 equalizer adjustments for precise audio control.

4.5 Split Screen Function

Display two applications on the screen simultaneously for enhanced multitasking and convenience.

The 8-core products support wired and wireless Mirror Link connections for both iPhone (iOS) and Android phones.

4.7 Car Information Display

Monitor essential car information such as speed, fuel level, oil pressure, and safety warnings directly on the unit's display, mirroring your car's dashboard.

Car information service condition display on the dashboard (speed, fuel, oil pressure, warnings) with blue, red, and green interfaces
Figure 14: Various interface styles (Blue, Red, Green) for displaying car information like speed, engine speed, remaining fuel, temperature, parking brake status, seat belt reminder, and door switch display.

4.8 AHD Reversing Video (Optional)

If an AHD rear-view camera is connected, the unit provides a clearer picture quality compared to ordinary cameras for safer reversing. (Rear view camera is not included).

AHD Reversing Video feature, showing a clearer rear-view image
Figure 15: Demonstration of the AHD Reversing Video feature, providing enhanced clarity for rear-view display.

4.9 ADAS DVR (Optional)

When connected to an ADAS DVR (Anti-collision warning driving recorder), the unit provides advanced safety features such as front vehicle distance prediction, anti-collision warnings, and lane departure warnings to enhance driving safety. (DVR is not included).

ADAS DVR (Anti-collision warning driving recorder) features like front vehicle distance prediction, anti-collision warning, and lane departure warning
Figure 16: Visual representation of ADAS DVR features, including front car start reminder, lane deviation warning, and front distance collision warning.

4.10 TPMS (Tire Pressure Monitoring System) Support (Optional)

After correctly installing the TPMS in your car, the sensors will automatically monitor tire pressure and temperature, transmitting real-time statistics to the receiver displayed on the unit.

Support for TPMS (Tire Pressure Monitoring System) with external and built-in options
Figure 17: Illustration of TPMS support, showing both external and built-in sensor options for monitoring tire conditions.

4.11 OBD II (On-board Diagnostics) Support (Optional)

With the OBD II function, you can monitor real-time data and retrieve fault codes from your vehicle's computer at any time. (OBD II is not included).

Support for OBD II (On-board diagnostics) to diagnose car status
Figure 18: Display showing OBD II functionality for on-board diagnostics and real-time data monitoring.

4.12 Original Car Functions

The unit is designed to retain the functionality of your original car features, including steering wheel controls, iDrive control, original CD player (if present), and the original car system.

Original car functions that remain working: steering wheel control, iDrive control, original CD, original car system, rear view camera, i-Drive control
Figure 19: Overview of original car functions that are maintained and integrated with the new system.

5. Maintenance

5.1 General Care

  • Keep the screen clean using a soft, lint-free cloth. Avoid abrasive cleaners.
  • Protect the unit from extreme temperatures and direct sunlight for prolonged periods.
  • Ensure proper ventilation around the unit to prevent overheating.

5.2 Software Updates

MEKEDE is committed to providing continuous improvements. Free firmware, software, and user interface updates are offered to enhance your experience. Check the manufacturer's website or contact support for the latest updates.

6. Troubleshooting

6.1 Common Issues and Solutions

  • No Sound: Refer to Section 3.2.1 for detailed steps on resolving sound issues, especially related to fiber optic cables and AUX mode.
  • Unit Not Powering On: Check all power connections. Ensure the vehicle's ignition is on.
  • Touch Screen Unresponsive: Try restarting the unit. If the issue persists, contact technical support.
  • GPS Signal Loss: Ensure the GPS antenna is correctly installed and has a clear view of the sky.
  • Bluetooth Connection Issues: Ensure both the unit and your phone have Bluetooth enabled and are in pairing mode. Try forgetting the device on both ends and re-pairing.
  • Apps Crashing/Slow Performance: Close background applications. Clear app cache. Ensure sufficient storage space.

7. Specifications

The following table outlines the general specifications for the Mekede MN-X Car Radio Carplay system. Note that specific configurations (CPU, RAM/ROM, Screen Resolution) may vary by model variant.

MN-X Parameters table showing different models with varying CPU, RAM/ROM, screen resolution, and features
Figure 20: Detailed parameter table for various MN-X models, including CPU, RAM/ROM, screen resolution, and feature support.
FeatureSpecification
Mekede ModelMN-X
Operating SystemAndroid 13 / Android 14
CPUMTK6762 (8-Core) / MTK8321 (4-Core) / UIS7862S / MTK8781
RAM2G / 4G / 6G / 8G / 12G
ROM64G / 128G / 256G / 512G
Display Size10.25-inch / 12.5-inch
Resolution1280*480 / 1920*720
Voltage12 V
Out Power4*45W
Item Weight3kg
Internet4G + WiFi
Special FeaturesBuilt-In Speaker/Microphone, WiFi function, Support 4G Network, Built-in GPS, Mobile Phone, DSP, CarPlay, Android Auto, Reversing Input, Split Screen, Support steering wheel control
Digital Media FormatCD (playback via external device)
CertificationCE, FCC, WEEE, ISO9001, ROHS, CCC, EAC-Russia, Emark, BSCI
Comparison of 10.25-inch vs 12.5-inch screen sizes
Figure 21: Visual comparison of the 10.25-inch and 12.5-inch display sizes.
Screen resolution comparison (1920*720 vs 1280*480 vs 800*480) showing clarity differences
Figure 22: Comparison of screen resolutions, illustrating the visual clarity difference between 1920*720, 1280*480, and 800*480 displays.

8. Warranty and Support

8.1 Product Warranty

Your Mekede Car Radio comes with a 3-year warranty. In case of product issues within 15 days of receipt, free replacement is supported. For any quality problems during the warranty period, please contact MEKEDE EU Online Store customer service for assistance.

3 years free replacement warranty terms and conditions
Figure 23: Overview of the 3-year free replacement warranty process.

8.2 Technical Support

MEKEDE offers free firmware, software, user interface, and GPS navigation map updates. For technical assistance or inquiries, please refer to the contact information provided by your seller or visit the official MEKEDE website.

8.3 Certifications

The product holds various certifications, including CE, FCC, WEEE, ISO9001, ROHS, CCC, EAC-Russia, Emark, and BSCI, ensuring compliance with international quality and safety standards.

Certifications including SGS, CE, ROHS, FCC, CCC, EAC-Russia, Emark, BSCI, ISO9001, EPR_France_WEEE, EPR_Germany_WEEE, EPR_France, EPR_Germany
Figure 24: Display of various product certifications.

9. User Tips

  • Optimize Sound: Experiment with the 32-band DSP equalizer settings to find the perfect audio profile for your music and car's acoustics.
  • Stay Connected: Utilize the built-in 4G and WiFi for seamless internet access, enabling real-time traffic updates, online music streaming, and browsing.
  • Personalize Your Experience: Explore different UI themes and set custom wallpapers to match your style.
  • Multitask Efficiently: Use the split-screen feature to run navigation and music simultaneously, enhancing convenience during drives.
  • Regular Updates: Keep your system updated with the latest firmware and software from Mekede to ensure optimal performance and access to new features.

10. Frequently Asked Questions (FAQ)

Q: Is the unit compatible with my Mercedes-Benz C-Class W204 2011 model?
A: This specific model (MN-X) is listed as compatible with Mercedes-Benz C-Class W204/S204/C200/C260/C300 from 2008-2010. Please verify compatibility for other model years with the seller or product specifications.
Q: Do I need to purchase additional accessories for CarPlay or Android Auto?
A: No, CarPlay and Android Auto functions are built-in. For wired Android Auto, you will need a USB cable for your phone. Wireless CarPlay requires Bluetooth connection.
Q: Can I use my original car's steering wheel controls with this unit?
A: Yes, the unit supports the original car's steering wheel controls and iDrive control, ensuring seamless integration.
Q: What should I do if there is no sound after installation?
A: First, ensure your car has an AUX input and that the original fiber optic cable is correctly connected to the conversion line, and the car's audio mode is switched to AUX. Refer to Section 3.2.1 for detailed troubleshooting.
Q: Is a rear-view camera included?
A: No, the rear-view camera is not included and must be purchased separately if desired.

11. User Interface Demonstration Video

Video 1: A comprehensive demonstration of the unit's user interface, including theme changes, wallpaper settings, Bluetooth functions (calling and music), local music and video playback, sound equalizer adjustments, split-screen mode, car dashboard display, WiFi connection, web browsing, CarPlay, and file management.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.