UWANT Y100 Steam Multiple Spot Cleaner Instruction Manual

1. Safety Precautions

⚠ Prior to using this product, read all safety precautions. Install the machine step by step in strict accordance with all contents of the instruction manual. Any operation deviating from the instructions may result in product damage or severe personal injury. This product is designed solely for use in conventional household environments and is unsuitable for industrial or outdoor applications. When using electrical equipment, fundamental precautions must be observed, including the following:

• This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• The liquid or steam must not be directed towards equipment containing electrical components, such as the interior of ovens.
• The appliance has to be unplugged after use and before carrying out user maintenance on the appliance.
• The appliance shall not be left unattended while it is connected to the supply mains.
• The appliance is not to be used if it has been dropped, if there are visible signs of damage or if it is leaking.
• Keep the appliance out of reach of children when it is energized or cooling down.
• Never immerse the product in water or liquids.
• Do not touch the plug or any live insulated part with wet fingers to avoid electric shock.
• If the power cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons to avoid hazards.
• If plug or cord damage is detected, stop use immediately and contact The Company's professional maintenance personnel for replacement to prevent hazards.
• Keep hair, loose clothing, fingers and other body parts away from this product's airflow channels and moving parts. Do not point the suction tube opening or accessory brush head toward eyes or ears, or place them in the mouth.
• Do not insert metal chips, pins, wires or similar objects into product gaps to prevent electric shock or injury. Disassembly, repair or modification must only be performed by qualified technicians.
• Unplug when not in use to prevent leakage, fire or malfunction.
• If abnormalities occur during operation, immediately disconnect power and contact The Company's after-sales service.
• After use, promptly empty the dirty water tank and maintain clear ventilation paths to prevent blockages causing suction reduction, motor overheating, and reduced product lifespan.
• Store the machine in a dry place after use. Do not store water in the clean water tank to avoid affecting overall machine lifespan.
• This product is suitable for spot cleaning fabric furniture items such as sofas, mattresses and carpets. Optimal results may not be achieved on other surfaces.
• Only add The Company's specified cleaning fragrance liquid during use. Add according to specified ratios to prevent excessive foam penetration into the motor, which may reduce lifespan.
• Do not shake the machine laterally during operation to prevent dirty water ingress into the motor, which may reduce lifespan.
• Minor residual water inside the machine is normal.
• When using the steam mode, never direct the brush head at people to avoid high-temperature burns.
• A small amount of water may be discharged before steam is released, which is a normal phenomenon.
• Water spray may delay shutting off after releasing the water spray button, which is normal.
• Never place the brush head in buckets or on surfaces with standing water, as over-suction may cause water leakage from the base.
• Empty the dirty water tank after each use prior to storage. When used infrequently, clean and dry both water tanks before storage to prevent bacterial growth and odor.

2. Product Overview

2.1. Product Components

⚠ Note: Images in the manual are for reference only; actual product in packaging shall prevail.

Figure 1: UWANT Y100 Steam Multiple Spot Cleaner with main unit and various brush heads.

Main Unit

• Main unit handle
• Water tank handle
• Water tank assembly
• Hose assembly
• Main body
• Handle bracket

Handle Assembly and Accessories

• Water spray nozzle
• Transparent window
• Head release button
• Handle body
• 2-in-1 brush plate (Tufted brush/Silicone brush)
• Water Spray/Steam Button
• Shoe brush
• Fabric brush
• Self-cleaning accessory
• Steam connector
• Steam crevice brush
• Steam round brush

⚠ Note: Recommended for cleaning local stains on sofas, mattresses, carpets, etc.; To detach the brush head, ensure the main unit is powered off. Press the water spray button to release internal water pressure, then press the brush head release button on the handle to remove.

Figure 2: Included accessories: Double-Sided Flexible Brush Sheet x 2, Standard Fabric Brush Head x 1, Wide Brush Head x 1, Steam Round Brush Head x 1, Shoe Cleaning Brush Head x 1, Self-cleaning Plug x 1, Steam Crevice Brush Head x 1, Steam Connector x 1, 500ml Fabric Cleaning Liquid x 1.

3. Setup

3.1. Brush Head Installation

• Align the brush head with the handle for insertion. Assembly is complete when a click sound is heard. The brush head does not detach when pulled reversely.
• Installation of Steam Joint.
• Installation of Steam Crevice Brush or Steam Round brush.

3.2. Brush Plate Replacement

• Replace the silicone brush or fabric brush on the reverse side. (Silicone and fabric brushes are mainly for hard surface cleaning.)

3.3. Water Tank Filling

• Hold the water tank handle and lift vertically upward to remove the tank.
• Rotate the tank cap outward to open. Pull the clean water tank water filler plug aside and fill with room-temperature water. Water level must not exceed the MAX fill line.
• After filling, close the water filler plug and rotate the tank cap shut.

⚠ Note: When adding cleaning fragrance liquid, adhere to standard ratios to avoid excessive foam from overfilling.

3.4. Machine Activation

• Confirm the water tank assembly is properly installed, the clean water tank contains adequate water, and the brush head is correctly assembled.
• Insert the power cord plug into an outlet. The unit is now in standby mode.

4. Operation

4.1. Operating Modes

• Normal Temperature Water Mode: In the power-off state, turn the knob to the normal temperature water mode position. The entire unit enters the water spray mode; press the button on the handle, and normal temperature water will flow out of the water spray port.
• Hot Water Mode (60°C): Turn the knob to the hot water mode position. The entire unit enters the water spray mode; press the button on the handle, and hot water will flow out of the water spray port.
• Steam Mode (100°C): Turn the knob to the steam mode indicator position. The entire unit enters the steam mode; press the button on the handle, wait for 30 seconds, and steam will be released from the water spray port.

4.2. Cleaning Process

• During brush head use, keep the brush plate flat against the cleaning surface.
• Press and hold the water spray button to apply water to the target area.
• Repeat cleaning until satisfactory.

Figure 3: 100°C high-temperature steam delivers bar-level pressure to dissolve stains, remove grease quickly, and sterilize with precision. Steam is hot, please use with care.

Figure 4: 60°C hot water provides a deeper clean by dissolving stains instantly, delivering faster and more effective washing results.

Figure 5: Easily interchangeable brush heads for specialized use, delivering efficient cleaning while preventing cross-contamination. Includes Standard Upholstery Brush, Steam Bristle Round Brush, Steam Crevice Brush, and Steam Shoe Cleaning Brush.

Figure 6: Guide to cleaning various fabric materials: Wool, Silk, Jute, Cotton, Sisal, Nylon, Polyester.

5. Maintenance

5.1. Machine Cleaning (Self-Cleaning)

• First, remove the brush head, then insert the self-cleaning plug in the direction of the arrow, press the water spray button, and the handle pipe and handle can be self-cleaned.
• Push the transparent window latch in the arrow direction to remove the window.
• If residue remains on the inner window surface, rinse under a faucet.
• After cleaning and drying, reinstall the transparent window onto the brush head.

Figure 7: UWANT's self-developed technology cleans the hose and lid automatically, keeping the machine fresh after every use.

5.2. Dirty Water Tank Cleaning

⚠ Note: Before cleaning the dirty water tank, unplug the power cord to stop machine operation.

• After use, hold the water tank handle to remove the tank.
• Place the tank in a sink. Rotate the tank cap along its axis by pressing latches around its perimeter.
• Tilt the tank while holding the handle with one hand and grasping the cap with the other to pour out dirty water.
• If the tank interior or cap is soiled, rinse separately under a faucet until clean.
• After cleaning and drying, reattach the cap to the tank. The seal ring must not be omitted or twisted (omission or twisting may cause abnormal suction).
• Insert the tank vertically into the main unit. Press down the tank cap until a click sound confirms proper installation.

5.3. Storage

⚠ Note: For prolonged non-use, detach accessories and store in a ventilated, dry location.

• Power Cord Storage: After use, wrap the power cord around the main unit handle using hook-and-loop fasteners.
• Hose Handle Storage: Coil the hose as shown. Insert the handle assembly into the main unit bracket and store in a ventilated, dry location.

Figure 8: The compact body stays lighter and easier to store, keeping the machine fresh after every use.

6. Troubleshooting

Before contacting maintenance services, check the following points:

Other faults requiring special tools must be repaired or replaced at authorized service centers.

7. Specifications

The data is based on tests conducted in Uwant Lab.

7.1. Circuit Diagram

Figure 9: Electrical circuit diagram for the UWANT Y100 Steam Multiple Spot Cleaner.

8. User Tips

• For best results on tough stains, pre-treat the area with the recommended cleaning solution before applying steam or hot water.
• Always use the appropriate brush head for the surface you are cleaning to avoid damage. The silicone brush is ideal for delicate fabrics and leather, while the bristle brush is for tougher stains.
• Ensure the water tanks are securely installed to prevent leaks and maintain optimal suction.
• Regularly clean the dirty water tank and check the filter cotton to prevent blockages and maintain suction efficiency.
• When using steam, allow the unit to preheat for the recommended 30 seconds to ensure consistent steam output.
• For hard-to-reach areas, utilize the steam crevice brush to effectively clean tight spaces.

9. Warranty and Support

The UWANT Y100 Steam Multiple Spot Cleaner comes with a 2-year manufacturer warranty. For any issues not covered in the troubleshooting section or requiring specialized repair, please contact an authorized service center.

For further details and comprehensive information, you may refer to the official user manual PDF available at: UWANT Y100 User Manual (PDF).