Introduction
The FEKER G108 is a high-performance mechanical keyboard kit designed for enthusiasts and gamers. Featuring a 108-key full-size layout, CNC aluminum top housing, modular design, and versatile 3-mode connectivity (Wired, 2.4G, Bluetooth), it offers a premium typing and gaming experience. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your keyboard.

Package Contents
Upon opening your FEKER G108 kit, please verify that all components are present:

- Keyboard bag
- Instruction manual (this document)
- TOP screws
- Silicone feet
- Switch puller
- Cleaning cloth
- 1.5M braided cable (USB Type-C)
- Optional: 9 replacement switches (for 3-Mode Finished Product)
- Optional: 30 replacement keycaps (23 PC transparent keycaps for 3-Mode Finished Product)
Setup Guide
1. Assembly (if applicable for kit version)
The FEKER G108 features a fully detachable modular design, allowing for customization and easy assembly.
1.1 Installing Switches
The keyboard supports hot-swappable switches. Use the provided switch puller to carefully insert or remove switches. Ensure the switch pins are aligned with the PCB sockets before pressing down gently.

1.2 Installing Keycaps
Align the keycap stem with the switch stem and press firmly until it clicks into place. Use the keycap puller if you need to remove keycaps.
1.3 Modular Screen/Nameplate Installation
The top-right corner features a true modular design where screens and decorative nameplates can be freely swapped. Gently align the module with its slot and press to secure it. The quick-release structure ensures easy changes without tools.


2. Connectivity
The FEKER G108 supports three connection modes: Wired (USB Type-C), 2.4G Wireless, and Bluetooth.

2.1 Wired Connection
- Connect the provided 1.5M braided USB Type-C cable to the keyboard's Type-C port.
- Connect the other end of the cable to an available USB port on your computer.
- The keyboard will be automatically detected and ready for use.
2.2 2.4G Wireless Connection
- Locate the 2.4G USB receiver (usually stored in a compartment on the keyboard).
- Plug the 2.4G receiver into an available USB port on your computer.
- Switch the keyboard to 2.4G mode (refer to the keyboard's physical switch or key combination, typically Fn + a specific key).
- The keyboard should automatically pair with the receiver. The TFT screen may indicate pairing status.
2.3 Bluetooth Connection
- Switch the keyboard to Bluetooth mode (refer to the keyboard's physical switch or key combination, typically Fn + a specific key for Bluetooth 1, 2, or 3).
- The keyboard's TFT screen should indicate "Bluetooth pairing" or a similar status.
- On your computer or device, open Bluetooth settings and search for new devices.
- Select "FEKER G108" (or similar name) from the list of available devices to pair.
- Follow any on-screen prompts to complete the pairing process.
3. Driver Installation (Optional)
For advanced customization of lighting, key remapping, and screen display settings, download and install the FEKER Self-developed Web Driver from the official website (refer to the Quick Start Guide for URL). This driver allows one-click modification and easy operation.

Operating Instructions
1. TFT Visual Window
The 1.14-inch HD secondary screen supports intuitive display of various system information and player-customized display settings. It can show time, date, battery status, connectivity mode, and more.

2. Multi-function Knob
The top-right corner features a physical multi-function knob for volume adjustment and one-key mute. Rotate to adjust volume, press to mute/unmute.
3. RGB Lighting
The keyboard supports 16.8 million color ARGB lighting. Customize lighting effects, colors, and brightness using the FEKER Web Driver or specific key combinations (refer to the Quick Start Guide for details).

4. Operating System Mode Switching
The keyboard supports both Windows and Mac operating systems. Use the designated key combination (e.g., Fn + Win/Mac key) to switch between modes for optimal compatibility.
Maintenance
1. Cleaning
- Use the provided cleaning cloth to gently wipe the keyboard surface and keycaps.
- For deeper cleaning, remove keycaps and use a soft brush or compressed air to clear dust and debris from between switches.
- Avoid using harsh chemicals or abrasive materials that could damage the aluminum alloy finish or keycap legends.
2. General Care
- Keep the keyboard away from liquids and excessive moisture.
- Avoid exposing the keyboard to extreme temperatures or direct sunlight for prolonged periods.
- When transporting, use the provided keyboard bag to protect it from scratches and impacts.
Troubleshooting
1. Keyboard Not Responding
- Wired Mode: Ensure the USB Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
- 2.4G Wireless Mode: Ensure the 2.4G receiver is plugged in and the keyboard is switched to 2.4G mode. Try re-pairing by switching modes or restarting the keyboard.
- Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth pairing mode. Forget the device on your computer and try pairing again. Ensure the keyboard battery is charged.
2. TFT Screen Not Displaying
- Check the keyboard's power status.
- Ensure the modular screen is correctly installed.
- If using the driver, verify screen settings.
3. RGB Lighting Issues
- Ensure the lighting is enabled via key combination or software.
- Check lighting settings in the FEKER Web Driver.
- If specific keys are not lighting up, check switch installation.
4. Keys Not Registering
- For hot-swappable switches, ensure switches are fully seated in their sockets.
- Clean around the affected key to remove any debris.
- If a specific switch is faulty, it can be replaced.
Specifications
The following table details the technical specifications of the FEKER G108 Mechanical Keyboard Kit:

| Feature | Description |
|---|---|
| Product Name | G108 3-Mode CNC Aluminum Mechanical Keyboard |
| Kind | 3-Mode Kit One / 3-Mode Kit Two / 3-Mode Finished Product |
| Color Options | Azure Sky Island Blue, Jade String Sound Green, Vermillion Ink Rite Red, Evangelion Purple, Frost Language Silver, Eternal Night Sequence Black, Moonlight Sequence White, Honey Heart Pink |
| Technology | Blue/Green/Red/Purple/Silver/Black: 220-Grit Anodizing | White/Pink: Electrophoresis |
| Shell Material | National standard 6063 aluminum alloy |
| Magnetic Contact Pins | 10-PIN Magnetic Sucking Pogo Pins + 8 Ball Detents Quick Release |
| Structure | GASKET and TOP Dual Structure |
| Shell Process | Exterior and interior sides are high-end, presenting a mirror-like translucent jade texture. |
| Keycap | Enrong 1.8mm Wall Thickness PBT Dye-Sublimation Keycaps |
| Axis (Switches) | Huaxun PRO Switch (Mute/Crisp Click), Peach Pink Silent Switch, Muffled Thunder Switch, Silent Muffled Switch |
| Lighting | 16.8 million Color ARGB Lighting |
| Number of Keys | 108 Key |
| PCB | 1.2mm Single Key Slot |
| Positioning Plate | PC positioning plate |
| Decorative Parts | Aluminum alloy knob, 1.14-inch color screen, 7x7 dot matrix screen, Anodized decorative nameplate |
| Driver | Webpage (driver for adjustable screen + dot matrix screen) |
| Battery Capacity | 10000mAh |
| Filling | PORON sandwich cotton + IXPE switch pad + PET sound-dampening pad + PORON bottom cotton + bottom sound-dampening pad |
| Size | 447.4 × 139.5 × 20 (front height) / 35.2 (rear height) mm |
| Net Weight | ~1940g (Kit One), ~2019g (Kit Two), ~2338g (Finished Product) |


User Tips
- Experiment with Switches: Since the keyboard is hot-swappable, don't hesitate to try different switch types to find your preferred typing feel and sound.
- Customize Your Screen: Utilize the FEKER Web Driver to personalize the TFT screen with information or animations that enhance your workflow or gaming experience.
- Optimize Connectivity: For competitive gaming, the wired or 2.4G wireless mode is generally recommended for lower latency. Bluetooth is excellent for general use and multi-device connectivity.
- Regular Cleaning: A quick wipe-down with the cleaning cloth can prevent dust buildup and keep your keyboard looking new.
Warranty and Support
For warranty information and technical support, please refer to the official FEKER website or contact your retailer. Keep your purchase receipt as proof of purchase.