Introduction
Thank you for choosing the FLYFANS Adjustable RC Aircraft Display Stand. This multi-level storage rack is designed to safely and efficiently display your remote control aircraft, including jets, EDF (Electric Ducted Fan), and turbine models. Constructed with durable materials and featuring adjustable shelf heights, it provides a versatile and organized solution for your RC collection. The support arms are covered with soft EVA padding to protect your models from scratches.
Package Contents
Please verify that all components are present before beginning assembly:
- Main frame components (base, vertical supports)
- Adjustable support arms with EVA padding
- Assembly hardware (screws, nuts, washers)
- Assembly tools (typically not included, see "Tools Required")
Tools Required
For assembly, you will need the following tools:
- Phillips screwdriver
- Adjustable wrench
Setup and Assembly
The display stand features an all-screw disassembly and assembly structure for robust construction.
- Unpack all components and lay them out on a clean, flat surface.
- Begin by assembling the base frame. Secure the horizontal base bars to the vertical support posts using the provided screws and nuts. Ensure all connections are snug but do not overtighten initially.
- Attach the vertical support beams to the assembled base. The stand is designed for stability, so ensure these connections are firm.
- Install the adjustable support arms onto the vertical beams. These arms are designed to be freely adjustable in height.
- Ensure the soft EVA sponge sleeves are securely fitted onto the support arms. These sleeves protect your aircraft from damage.
- Once all components are assembled, carefully tighten all screws with a Phillips screwdriver and adjustable wrench. Double-check all connections for stability.
Operating Instructions
Using your FLYFANS display stand is straightforward:
- Adjust Height: Loosen the screws on the support arms to adjust them to the desired height for your aircraft. Ensure the arms are level and then retighten the screws firmly.
- Place Aircraft: Carefully place your RC aircraft onto the padded support arms. Ensure the weight is evenly distributed and the aircraft is stable.
- Secure Placement: For added security, especially with heavier or more delicate models, ensure the aircraft's landing gear or other stable points rest securely on the padded arms.
- Multi-Level Display: Utilize the multiple levels to display several aircraft, optimizing your space.
Maintenance
To ensure the longevity and continued performance of your display stand:
- Cleaning: Wipe down the metal frame with a soft, damp cloth. Avoid abrasive cleaners that could damage the finish.
- Padding Care: Inspect the EVA sponge sleeves periodically for wear and tear. Replace if necessary to maintain optimal protection for your aircraft.
- Fastener Check: Regularly check all screws and connections to ensure they remain tight. Retighten as needed to maintain stability.
- Weight Limit: Do not exceed the recommended weight capacity for each arm or the overall stand.
Troubleshooting
- Issue: Stand feels unstable or wobbly.
- Solution: Ensure all assembly screws are fully tightened. Check that the stand is placed on a flat, level surface. Uneven weight distribution of aircraft can also cause instability; try rearranging your models.
- Issue: Aircraft slips on the support arms.
- Solution: Verify that the EVA sponge sleeves are properly in place and not worn out. Ensure the aircraft is balanced on the arms and not placed at an extreme angle. The stand is designed for display, not for active maintenance where significant force might be applied.
Specifications
| Feature | Detail |
|---|---|
| Height | 1800 mm |
| Width (Small Size Rack) | 450 mm |
| Width (Large Size Rack) | 850 mm |
| Length | 805 mm |
| Weight | Approximately 9.77 kg |
| Material | Metal frame with EVA padded support arms |
| Assembly Structure | All-screw disassembly and assembly |
| Recommended Age | 14+ years |
| Certification | CE |
| Origin | Mainland China |
User Tips
- For optimal stability, place the display stand on a hard, level floor surface.
- When adjusting the height of the support arms, ensure the aircraft is removed to prevent accidental drops.
- Consider the wingspan and fuselage length of your aircraft when selecting the appropriate rack size (Small or Large) to ensure a proper fit and display.
- Periodically dust the stand and aircraft to maintain a clean and professional display.
Warranty and Support
This product is designed for durability and ease of use. For any issues or inquiries, please contact your retailer or the manufacturer's customer support. Please retain your proof of purchase for warranty claims, if applicable. Specific warranty terms may vary by region and retailer.
