GSL ENERGY W-A20K

Contents

GSL ENERGY 51.2V 20KWH LiFePO4 Lithium Solar Battery User Manual

Model: W-A20K

Brand: GSL ENERGY

1. Introduction

Thank you for choosing the GSL ENERGY 51.2V 20KWH LiFePO4 Lithium Solar Battery. This high-performance energy storage system is designed to provide reliable and efficient power for various applications, particularly home solar energy storage. This manual will guide you through the safe installation, operation, and maintenance of your battery system.

2. Safety Information

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.

  • Always wear appropriate personal protective equipment (PPE) during installation and maintenance.
  • Do not attempt to open, disassemble, or modify the battery unit. There are no user-serviceable parts inside.
  • Keep the battery away from flammable materials, heat sources, and direct sunlight.
  • Ensure proper ventilation around the battery to prevent overheating.
  • Do not expose the battery to water or excessive moisture.
  • Only qualified personnel should perform electrical connections and system commissioning.
  • Ensure the battery is properly grounded.
  • In case of fire, use a Class D fire extinguisher (for lithium-ion batteries). Do not use water.

3. Product Overview

3.1 Key Features

  • High Capacity: 51.2V 20.48kWh LiFePO4 battery for substantial energy storage.
  • Long Cycle Life: ≥8500 cycles at 80% Depth of Discharge (DOD).
  • Integrated Design: Features auto-addressing, a built-in breaker, touchscreen control, and integrated rollers for ease of use and installation.
  • Scalability: Supports parallel connection of up to 16 units for expanded power needs.
  • Wide Compatibility: Matches all 48V hybrid inverters (40-60VDC).
  • Safety: Internal Smart BMS (Battery Management System) provides comprehensive protection.
  • Maintenance-Free: No memory effect, requiring minimal upkeep.
  • Warranty: 10-year warranty.

3.2 Components and Interface

The GSL ENERGY battery unit features a user-friendly interface and robust connection points. Refer to the diagram below for an overview of the main components and their locations.

GSL ENERGY 51.2V 20.48kWh Floor Stand Battery with key features: Auto-Addressing, Built-in Breaker, Touchscreen Control, Integrated Rollers.
Figure 1: GSL ENERGY Battery with Key Features
Rear panel connections and dimensions of the GSL ENERGY battery, showing Battery Positive, Breaker, Power Switch, Battery Negative, RUN/ALM, SOC, CAN/RS485 Port, RST, and Ground Connection.
Figure 2: Rear Panel Connections and Dimensions
  • Battery Positive (+): Main positive terminal for power output.
  • Battery Negative (-): Main negative terminal for power output.
  • Breaker: Integrated circuit breaker for safety and system isolation.
  • Power Switch: On/Off switch for the battery unit.
  • RUN/ALM: Status indicator lights (Run/Alarm).
  • SOC: State of Charge indicator.
  • CAN/RS485 Port: Communication ports for inverter connection and parallel communication.
  • RST: Reset button.
  • Ground Connection: Essential for safety grounding.

4. Setup

4.1 Physical Installation

The GSL ENERGY battery is a floor-stand unit with integrated rollers for easy positioning. Ensure the installation location is:

  • Dry, well-ventilated, and protected from direct sunlight and extreme temperatures.
  • On a stable, level surface capable of supporting the battery's weight (approx. 192 kg / 421 lbs).
  • Accessible for connections and maintenance.
  • Dimensions: 550mm (W) x 982mm (H) x 280mm (D).
Packaging diagram for quick and safe installation, showing the battery unit secured within protective foam and an outer carton.
Figure 3: Quick Installation Packaging

4.2 Electrical Connections

All electrical connections should be performed by a certified electrician.

  1. Grounding: Connect the battery's ground terminal to a reliable earth ground.
  2. DC Power Connection: Connect the Battery Positive (+) and Battery Negative (-) terminals to your solar inverter's corresponding DC input terminals. Ensure correct polarity.
  3. Communication Cable: Connect the CAN/RS485 port to your inverter's communication port using the appropriate cable. The battery features auto-addressing for simplified setup.

4.3 Parallel Connection (Optional)

The GSL ENERGY battery supports parallel connection of up to 16 units to increase total energy storage capacity. When connecting multiple units in parallel:

  • Ensure all batteries are of the same model and charged to a similar State of Charge (SOC) before connecting.
  • Use appropriate busbars and communication cables for parallel connection.
  • Refer to the inverter's manual for specific instructions on parallel battery configurations.
Diagram illustrating parallel connection capability for up to 16 GSL ENERGY battery units.
Figure 4: Parallel Connection Diagram (Up to 16 Units)

4.4 Inverter Compatibility

This battery system is compatible with a wide range of 48V hybrid inverters operating within a 40-60VDC range. Some compatible brands include:

List of compatible inverter brands (40-60VDC) including Deye, Growatt, GOODWE, SAJ, Solis, SOFEN, SUN SYNK, Afore, Sinexcel, Hoymiles, INVT, SMK SOLAR, SRNE, LUXPOWER, LBS, ZAPPOWER, AISWEI, SOFAR, MUST, SACOLAR, SUMRY, Schneider Electric, Victron Energy, SMA, OutBack Power, SOROTEC, Voltronic Power.
Figure 5: Compatible Inverter Brands (40-60VDC)

5. Operating Instructions

5.1 Powering On/Off

  1. Power On: Ensure all connections are secure. Flip the Power Switch to the 'ON' position. The RUN indicator should light up.
  2. Power Off: Flip the Power Switch to the 'OFF' position.

5.2 Real-Time Display and Monitoring

The integrated HD touchscreen provides real-time data on the battery's status. You can monitor:

  • Voltage (V)
  • Current (A)
  • Average Temperature (Temp. Ave)
  • Average Cell Voltage (Cell V. Ave)
  • State of Charge (SOC %)
HD Touchscreen display showing real-time battery status including Voltage, Current, Temperature, Cell Voltage, and State of Charge.
Figure 6: Real-Time HD Touchscreen Display

5.3 Charging Solution Overview

The battery integrates seamlessly into a home solar energy storage system. Solar panels (PV modules) generate electricity, which is managed by a solar inverter. The inverter charges the LiFePO4 battery and supplies power to household appliances. Excess energy can be fed back to the grid via a smart meter and bi-directional meter, or drawn from the grid when solar generation is insufficient. The entire system can be monitored via a smartphone app connected to an internet cloud.

Diagram of a typical home solar energy storage system setup, showing connections between PV modules, solar inverter, LiFePO4 battery, grid, smart meter, bi-directional meter, and household appliances, with remote monitoring via smartphone.
Figure 7: Typical Home Solar Energy Storage System Setup

5.4 Video Demonstration

Watch this video for a visual guide on connecting a similar high-voltage battery system, demonstrating easy configuration and maintenance for safe and reliable operation.

Video 1: High Voltage LiFePO4 Battery Connection Guide

6. Maintenance

The GSL ENERGY LiFePO4 battery is designed to be maintenance-free. However, regular checks can ensure optimal performance and longevity:

  • Visual Inspection: Periodically inspect the battery unit for any signs of damage, corrosion, or loose connections.
  • Cleanliness: Keep the battery unit clean and free from dust and debris. Use a dry, soft cloth for cleaning.
  • Ventilation: Ensure that the ventilation openings are not obstructed.
  • Firmware Updates: Check with GSL ENERGY support or your installer for any available firmware updates for the BMS.

7. Troubleshooting

If you encounter any issues with your GSL ENERGY battery, refer to the following basic troubleshooting steps. For complex problems, contact qualified technical support.

  • Battery Not Powering On: Check the power switch position and ensure all DC connections are secure and correctly polarized. Verify the inverter is also powered on.
  • No Communication with Inverter: Check the communication cable connection between the battery and the inverter. Ensure the inverter's communication settings are correctly configured for the GSL ENERGY battery.
  • Alarm Indicator On: Check the touchscreen display for specific error codes or messages. Consult the inverter's manual for related error interpretations. Try pressing the RST button to reset the battery.
  • Low State of Charge: Ensure solar panels are receiving adequate sunlight and the solar inverter is operating correctly to charge the battery.

8. Specifications

Detailed technical specifications for the GSL ENERGY W-A20K LiFePO4 Lithium Solar Battery.

Detailed battery specifications table for Model W-A20K, including nominal parameters, basic parameters, and electrical parameters.
Figure 8: Battery Specifications Table (Model W-A20K)
ParameterValue
Model NumberW-A20K (GSL-G5-19.20KW)
Battery ChemistryLiFePO4
System Voltage51.2 V
Capacity400Ah
Energy20.48 kWh
Dimension (W*H*D)550*982*280mm (21.6*38.6*11.0 in)
Weight Approximate192 kgs / 421 lbs
System TypeRack-mounted / Floor-stand
TypeSplit
Communication PortRs485, CAN
Protection ClassIP54
Grid ConnectionOff grid, Hybrid grid
Warranty10 Years
ApplicationHome Solar Energy Storage System
Cycle Life (25±2°C, 0.5C/0.5C, 80%EOL)8500 Times
Storage Time / Temperature5 months @ 25°C; 3 months @ 35°C; 1 month @ 45°C
Operation Temperature-20°C to 60°C @ 60+/-25% Relative Humidity
Charging Temperature0°C to 45°C @ 60+/-25% Relative Humidity
CertificationCB-IEC62619, CE-EMC, UN38.3, MSDS, cULus LISTED, SGS
BMSSmart BMS System
Operation Voltage46-56Vdc
Max. Charging Voltage56Vdc
Max. Charging Current200A
Max. Discharging Current200A
Max Power10240W

9. User Tips

  • For optimal performance, ensure your inverter's settings are correctly configured to match the battery's voltage and current parameters.
  • When expanding your system with parallel units, always ensure all batteries are from the same manufacturer and model to maintain system stability and efficiency.
  • Regularly check the touchscreen display for any alerts or unusual readings to proactively address potential issues.
  • Consider installing the battery in a location with stable ambient temperature to maximize its lifespan and efficiency.

10. Warranty and Support

The GSL ENERGY 51.2V 20KWH LiFePO4 Lithium Solar Battery comes with a 10-year warranty, reflecting our commitment to quality and reliability. For technical support, warranty claims, or any questions not covered in this manual, please contact your authorized GSL ENERGY dealer or visit the official GSL ENERGY website for contact information.

Certifications obtained by GSL ENERGY for their battery products, including cULus LISTED, SGS, IEC CB SCHEME, CE, MSDS, and UN38.3 PASSED.
Figure 9: Product Certifications

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.