Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your S63 K-Port Connection Cable. This cable is designed to seamlessly integrate your Vimoto Bluetooth helmet headset (V3, V6, V8, V1098a, V5s series) with a wide range of two-way radios, enabling clear and reliable communication while on the go.
Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Compatibility
The S63 K-Port Connection Cable is compatible with the following Bluetooth Helmet Headset series and Two-Way Radio models:
Compatible Bluetooth Helmet Headsets:
- Vimoto V3 series
- Vimoto V6 series
- Vimoto V8 series
- Vimoto V1098a series
- Vimoto V5s series
Compatible Two-Way Radios (K-Port Connector):
- PUXING: PX-777/Plus, PX-666, PX-888/K, PX-328, PX-333, PX-999, PX-555
- QUANSHENG: TG-K4AT, TG-2AT, TG-45AT, TG-42AT, TG-22AT, TG-25AT, TG-UV2
- WOUXUN: KG-699, KG-689, KG-669, KG-679, KG-703, KG-659, KG-639, KG-833, KG-889, KG-869, KG-819, KG-816, KG-UVD1P, KG-UV6D, KG-UVA1
- WLN: KD-C1
- Retevis: H777, RT-5R, RT-5RV, RT-B5, RT-B6, R888Plus
- TYT: TH-300, TH-500, TH-600, TH-800, TH-900, TH-9900, TH-F2, TH-F3, TH-F5, TH-F6, TH-F7, TH-F8, TH-UVF8D, TH-UVF9/D, TH-UV8000D
- BAOFENG: GT-3, UV5R/Plus, UV-6R, UV5RA/Plus, UV5RB, UV5RC, UV5RE/Plus, UV3R+Plus, UV-8/D, UV-82, UV-B5, UV-B6, BF-F8+, BF-F8HP, BF-F9 V2+, GT-3TP, GT-5, GT-5TP, UV-82HP, DM-5R Plus, UV-5X, UV-5R5, BF-UVB2 Plus, GT-1, BF-K5, BF-480, BF-490, BF-320, BF-V6, BF-V8, BF-888s Plus, BF-666s, BF-777s, BF-999, BF-888, BF-777, BF-658, BF-668, BF-530, BF-520, BF-658
- KENWOOD: TK-208, TK-220, TK-240, TK-240D, TK-248, TK-250, TK-270, TK-270G, TK-272, TK-272G, TK-278G, TK-308, TK-320, TK-340, TK-340D, TK-348, TK-350, TK-353, TK-360G, TK-360, TK-370, TK-370G, TK-372G, TK-372, TK-373G, TK-373, TK-378G, TK388G, TK-2100, TK-2102, TK-2102L, TK-2107, TK-2118, TK-2160, TK-2170, TK-2170K, TK-2200, TK-2200L, TK-2200LP, TK-2202, TK-2202K, TK2212, TK-2212K, TK3100, TK-3101, TK-3102, TK-3107, TK-3130, TK3131, TK3160, TK3170, TK3170K, TK3173, TK-3200, TK-3200L, TK-3200LP, TK-3202, TK-3202K, TK-3202L, TK-3230, TK-3230XLS, TH-D7, TH-D7A, TH-D7AG, TH-D7E, TH-F6, TH-F6A, TH-F7, TH-F7E, TH-G71, TH-G71A, TH-G71E, TH-K2, TH-K2A, TH-K2AT, TH-K2E, TH-K2ET, TH-21, TH-21AT, TH-21BT, TH-22, TH-22A, TH-22AT, TH-22E, TH-25, TH-26, TH-27, TH-28, TH-31AT, TH-31BT, TH-41AT, TH-41BT, TH-42, TH-42A, TH-42AT, TH-42E, TH-45, TH-46, TH-47, TH-48, TH-55, TH-75, TH-77, TH-77A, TH-77E, TH-78, TH-78A, TH78-E, TH-79, TH-79A, TH-79E, TH-205, TH-205A, TH-205AT, TH-205E, TH-215, TH-215A, TH-225, TH-225A, TH-235, TH-235A, TH235E, TH-315, TH-315A, TH-415, TH-415A, TH-415E
Setup Instructions
-
Connect to Helmet Headset: Locate the AUX input port on your Vimoto Bluetooth helmet headset. Connect the 3.5mm audio jack of the S63 K-Port Connection Cable into this AUX port. Ensure a firm connection.
Figure 1: Close-up of the 3.5mm audio jack. Important Tip: Always connect the AUX cable to the headset first before connecting to the two-way radio to ensure proper voice transmission.
-
Connect to Two-Way Radio: Identify the K-port (two-pin) connector on your compatible two-way radio. Align the K-port connector of the S63 cable with the radio's port and push firmly until it clicks into place.
Figure 2: Close-up of the K-port two-pin connector. -
Secure the PTT Button: The cable features a Push-to-Talk (PTT) button with a clothing clip. Attach this clip to a convenient location on your clothing or gear for easy access during operation.
Figure 3: PTT button with integrated clip. -
Cable Management: Utilize the coiled section of the cable to manage excess length and provide flexibility during movement. Ensure the cable is routed safely to avoid snagging or interference.
Figure 4: Coiled cable section.
Operating Instructions
Once the S63 K-Port Connection Cable is properly connected to your helmet headset and two-way radio:
- Receiving Audio: Audio from your two-way radio will be automatically routed through the S63 cable to your connected Vimoto Bluetooth helmet headset.
- Transmitting Audio: To transmit, press and hold the Push-to-Talk (PTT) button on the S63 cable. Speak clearly into your helmet headset's microphone. Release the PTT button when you are finished speaking.
- Volume Control: Adjust the volume using the controls on your Vimoto Bluetooth helmet headset or your two-way radio, as appropriate.
Care and Maintenance
- Cleaning: Wipe the cable and connectors with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Handling: Do not pull the cable forcefully from the connectors. Always grasp the connector housing when disconnecting. Avoid excessive bending or stretching of the coiled section to prevent damage to internal wires.
- Inspection: Periodically inspect the cable for any signs of wear, fraying, or damage to the connectors. Discontinue use if damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No voice/audio from radio to headset. | AUX cable not connected to headset first. Loose connection. | Ensure the 3.5mm AUX jack is connected to the Vimoto headset BEFORE connecting the K-port to the radio. Check all connections are secure. Verify headset is powered on and functioning. |
| Cannot transmit (PTT button unresponsive). | Loose K-port connection. Faulty PTT button. | Ensure the K-port connector is fully inserted into the radio. Test the radio's PTT function directly if possible. |
| Intermittent audio or static. | Loose connections. Damaged cable. Interference. | Check all connections. Inspect the cable for visible damage. Move away from potential sources of electromagnetic interference. |
| Cable does not fit radio/headset. | Incompatibility. | Verify your specific radio and headset models against the compatibility list in this manual. This cable is designed for K-port radios and Vimoto AUX-input headsets. |
Specifications
- Product Type: Helmet Headset to Two-Way Radio Connection Cable (Accessory)
- Connector Type (Radio): K-Port (2-pin)
- Connector Type (Headset): 3.5mm AUX Jack
- Compatible Headsets: Vimoto V3, V6, V8, V1098a, V5s series
- Material: ABS
- Color: Black
- Frequency Range (Radio Dependent): VHF / UHF
- Maximum Range (Radio Dependent): 3km-5km
- Storage Channel (Radio Dependent): Varies by radio model
- Display: No (Accessory)
User Tips
- For optimal audio, always ensure the 3.5mm AUX cable is securely connected to your Vimoto helmet headset before plugging the K-port into your two-way radio. This sequence helps establish the audio path correctly.
- When using the PTT button, press it firmly and hold it down for the duration of your transmission. Release it completely to switch back to receive mode.
- Consider using cable ties or Velcro straps to neatly manage the cable length, especially the coiled section, to prevent tangles and reduce strain on the connectors during active use.
Warranty and Support
For warranty information, technical support, or any inquiries regarding this product, please refer to the seller's specific policies or contact the seller directly through your purchase platform. Keep your purchase receipt as proof of purchase.
