1. Introduction
The Dooya DT52E 75W Electric Curtain Motor is a smart tubular motor designed for automated curtain systems. It features RF433 remote control capabilities, allowing for convenient opening, closing, and stopping of curtains. This motor is suitable for various project applications and operates on a 220V power supply. This manual provides essential information for the safe installation, operation, and maintenance of your electric curtain motor.
2. Safety Information
Please read all safety instructions carefully before installation and operation to prevent injury or damage. Keep this manual for future reference.
- Rated Voltage: AC 220V~. Ensure the power supply matches the motor's requirements.
- Electrical Safety: Installation and wiring should be performed by a qualified electrician in accordance with local electrical codes.
- EU Compliance: This product has undergone EU conformity assessment and complies with the following directives:
- Low Voltage Directive 2014/35/EU (LVD)
- Electromagnetic Compatibility Directive 2014/30/EU (EMC)
- Restriction of Hazardous Substances Directive 2011/65/EU (RoHS)
- General Product Safety Regulation (GPSR)
- Environmental Note: This product complies with EU RoHS. Do not dispose of it as household waste. Please recycle it in accordance with local regulations for waste electrical and electronic equipment.
- Keep hands and loose clothing clear of moving parts during operation.
- Do not allow children to play with the motor or remote control.
3. Package Contents
Upon opening the package, please verify that all components are present and undamaged.
- Dooya DT52E 75W Electric Curtain Motor
- User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | DT52E 75W |
| Brand | Dooya |
| Rated Voltage | AC 220V~ |
| Wattage | 75W |
| Control Method | RF433 Remote Control |
| Dimensions (Length) | 218 mm |
| Dimensions (Diameter) | 50 mm (one end), 70 mm (other end) |
| Weight | 1.4 kg |
| Battery Included | No |
| High-concerned chemical | None |
5. Setup
Professional installation is highly recommended for this electric curtain motor.
5.1. Physical Installation
Mount the motor securely within your curtain track system according to the track manufacturer's instructions. Ensure the motor is properly aligned and can move freely without obstruction.
5.2. Wiring Connections
Refer to the diagram below for wiring connections. All electrical work should be performed by a qualified professional.
- Power Cable (电源线): Connect the motor to an AC 220V~ power supply. Ensure correct live, neutral, and ground connections.
- RJ45 Low Voltage Interface (RJ45弱电接口): This port is for low-voltage control signals, potentially for integration with smart home systems or external switches.
- LED Indicator Light (LED指示灯): Provides visual feedback on the motor's status.
- Setting Button (设置键): Used for programming and pairing with remote controls.
5.3. Remote Control Pairing
The DT52E 75W motor works with Dooya RF433MHz remote controllers (single or dual channel). The exact pairing procedure may vary slightly depending on the remote model, but generally involves these steps:
- Ensure the motor is powered on.
- Locate the 'Setting Button' on the motor (refer to Figure 3).
- Press and hold the 'Setting Button' for a few seconds until the motor gives a short jog or the LED indicator changes.
- Within a few seconds, press the 'Open' or 'Up' button on your Dooya RF433MHz remote control.
- The motor should jog again, indicating successful pairing.
- Test the remote control functions (Open, Close, Stop) to confirm.
6. Operating Instructions
6.1. Basic Operation with Remote Control
- Open: Press the 'Open' or 'Up' button on the remote to fully open the curtains.
- Close: Press the 'Close' or 'Down' button on the remote to fully close the curtains.
- Stop: Press the 'Stop' button on the remote to halt the curtains at any desired position.
6.2. Light Touch Operation
The motor supports a 'light touch' feature. Gently pulling the curtain fabric can initiate the motor to automatically open or close the curtains fully.
7. Maintenance
- Keep the motor and curtain track clean and free from dust and debris.
- Periodically check all connections for tightness and signs of wear.
- Do not attempt to lubricate the motor unless specifically instructed by the manufacturer.
- If the motor exhibits unusual noise or behavior, discontinue use and consult a qualified technician.
8. Troubleshooting
If you encounter issues with your motor, try the following basic troubleshooting steps:
- Motor not responding: Check if the motor is properly connected to the power supply. Ensure the remote control batteries are not depleted. Re-pair the remote control if necessary.
- Curtains not moving smoothly: Inspect the curtain track for any obstructions or damage. Ensure the curtain fabric is not snagged.
- Unusual noises: Discontinue use immediately and contact support.
For complex issues, it is recommended to contact customer support or a qualified technician.
9. User Tips
No specific user tips were available from reviews or Q&A for this product at this time. Always ensure your curtain track is clean and well-maintained for optimal motor performance.
10. Warranty and Support
For technical support, warranty claims, or further information, please contact the manufacturer or authorized representative:
Manufacturer:
- Name: Lumi United Technology Co., Ltd.
- Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road, Liuxian Ave, Taoyuan Residential District, Nanshan District, Shenzhen, China
- Telephone: +86-18589043609
EU Authorized Representative:
- Name: Sophie Bennett
- Address: 9 rue du Bat d'Argent, 69001 Lyon, France
- Telephone: +33-774555006
A detailed user manual in PDF format is also available for download: Dooya DT52E 75W Electric Curtain Motor User Manual (PDF)